• Journal of Power Electronics
• /
• v.16 no.5
• /
• pp.1981-1989
• /
• 2016

Battery diagnosis is vital to battery-based applications because it ensures system reliability by avoiding battery failure. This paper presents a novel intelligent battery charger with an online diagnosis function to circumvent interruptions in system operation. The charger operates in normal charging and diagnosing modes. The diagnosis function is performed with the impedance spectroscopy technique, which is achieved by injecting a sinusoidal voltage excitation signal to the battery terminals without the need for additional hardware. The impedance spectrum of the battery is calculated based on voltage excitation and current response with the aid of an embedded digital lock in amplifier in a digital signal processor. The measured impedance data are utilized in the application of the complex nonlinear least squares method to extract the battery parameters of the equivalent circuit. These parameters are then compared with the reference values to reach a diagnosis. A prototype of the proposed charger is applied to four valve-regulated lead-acid batteries to measure AC impedance. The results are discussed.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2002.12a
• /
• pp.410-413
• /
• 2002

일반적으로 휴대폰에는 리튬이온(Ll-lon) 전지(battery)를 많이 사용하고 있으며 그 전지(battery)를 충전시키기 위해 Microcontroller를 사용해서 과충전과 방전, 그리고 전지(battery) 보호와 충전에 대한 일정한 전류를 제어한다. 여기에서 충전 동작 시 필요한 일반직인 충전 전류 제어를 PWM의 방식에 의존하지 않고 인공지능 기법을 이용해 소프트웨어적으로 처리가 필요한 파라메터 값을 추정해 적용시키고자 한다. 따라서 개발한 충전시스템에 일반적인 충전 파라메터를 전압과 전류 그리고 시간으로 분류하여 Microcontroller에 그 파라메터를 적용시켜 PWM 방식으로 제어한 후에 실험에 의한 결과값을 얻는다. 그리고 이것들을 비교하여 보다 나은 충전시스템을 구현하기 위해 인공지능 기법 중에 하나인 신경망을 이용하여 전압과 전류 그리고 시간에 대한 파라메터를 처리하였다. 본 논문에서 신경망에 대한 파라메터의 학습을 일반 FC에서 구현하고 여기에서 추출된 학습 값을 Microcontroller에 적용시켜 입력값에 따라 다양한 PWM 신호를 발생시키도록 구현했다. 이후 실제적인 실험에 의한 결과값을 본 논문에서 서술하였다.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.329-330
• /
• 2013

In this research, a novel battery charge system with embedded diagnosis function is proposed by using online impedance spectroscopy. The impedance spectroscopy technique is employed to investigate the impedance variation of the battery thereby estimating the state of health of the battery. A small voltage perturbation is applied to the battery by the voltage controller of the bidirectional converter with no additional hardware and the impedance of the battery is then calculated by the digital lock-in amplifier embedded in the DSP of the charger. The design procedure of the proposed charger is detailed and the feasibility of the system is verified by the experiments.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.23 no.2
• /
• pp.142-156
• /
• 2024

The transition to electric vehicles is a crucial step toward achieving carbon neutrality in the transportation sector. Adequate charging infrastructure at residential locations is essential. In South Korea, the predominant form of housing is multifamily dwellings, necessitating the provision of public charging stations for numerous residents. Although the government mandates the availability of charging facilities and designated parking areas for electric vehicles, it bases the supply of charging stations solely on the number of parking spaces. Slow chargers, mainly 3.5kW charging outlets and 7kW slow chargers, are commonly used. While the former is advantageous for installation and use, its slower charging speed necessitates the coexistence of both types of chargers. This study presents an optimization model that allocates chargers capable of meeting charging demands based on daily driving distances. Furthermore, using the metaheuristic algorithm Tabu Search, this model satisfies the optimization requirements and minimizes the costs associated with charger supply and usage. To conduct a case study, data from personal travel surveys were used to estimate the driving distances, and a hypothetical charging scenario and environment were set up to determine the optimal supply of 22 units of 3.5kW charging outlets for the charging demands of 100 BEVs.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.4
• /
• pp.56-65
• /
• 2013

The word is endeavoring to reduce greenhouse gases with the sense of crisis caused by the continuous climate change. As a method to decrease greenhouse gases, motors driven by fossil fuels are being substituted by EV in the field of transportation. Meanwhile, for the spread of EV, charging installations are divided into general charging type and quick charging type. Also, charging amount and time are main factors to decide charging pay. But, because the opportunity coast for the charging time varies depending on the private situations, it is very important to understand exact phenomenon for the spread of EV charging installations and charging pay policy. Therefore this paper suggested the choice model of charging installation and time value in various situations by using Logit model to make clear the relationship between a choice of charging installation, charging time and willingness to pay for charge.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.6
• /
• pp.57-69
• /
• 2022

Even though demand to charge EV(electric vehicles) is increasing, there are some problems to construct EV charging stations and problems from deficient them. Typical problem of EV charging stations is discordance for EV charging station location with its demand. This study investigates methods to determine the optimized location for fast EV charging stations considering charging demand in Seoul. Firstly, variables influencing on determination of determine the optimized location for fast EV charging stations were decided, and then evaluation of weights of the variables and data collection were conducted. Using the weights, location potential scores for each area-cell were calculated and optimized locations for fast EV charging stations were resulted.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.6
• /
• pp.211-224
• /
• 2022

In this study, factors affecting the efficacy of EV charging infrastructure improvement were investigated for EV users on Jeju Island. This study analyzed satisfaction with the EV charging infrastructure and demographic factors that affect the efficacy of EV charging infrastructure improvement. Factors found to affect the efficacy of EV charging infrastructure improvement include a sufficient number of charger installations, the speed in using EV chargers, the ease of obtaining additional information about charging, and fast customer service for faulty chargers. It was also confirmed that demographic factors such as user's housing types had a significant effect. This study contributes to verifying user satisfaction with the construction of EV charging infrastructure throughout Jeju Island.

• Journal of Industrial Technology
• /
• v.40 no.1
• /
• pp.7-12
• /
• 2020

Lithium-ion cells have become the go-to energy source across all applications; however, dendritic growth remains an issue to tackle. While there have been various research conducted and possible solutions offered, there is yet to be one that efficiently rules out the problem without, however, introducing another. This paper seeks to present a fast charging method and system to which lithium-ion batteries are charged while maintaining their lifetime. In the proposed method, various lithium cells are charged under multiple profiles. The parameters of charge profiles that inflict damage to the cell's electrodes are obtained and used as thresholds. Thus, during charging, voltage, current, and temperature are actively controlled under these thresholds. In this way, dendrite formation suppressed charging is achieved, and battery life is maintained. The fast-charging system designed, comprises of a 1.5kW charger, an inbuilt 600W battery pack, and an intelligent BMS with cell balancing technology. The system was also designed to respond to the aging of the battery to provide adequate threshold values. Among other tests conducted by KCTL, the cycle test result showed a capacity drop of only 0.68% after 500 cycles, thereby proving the life maintaining capability of the proposed method and system.