• 한국멀티미디어학회논문지
• /
• 제10권3호
• /
• pp.303-315
• /
• 2007

본 논문에서는 비디오에서의 특징점 추적을 통해 얻은 2차원 좌표를 이용하여 3차원 구조를 계산하고 부분적으로 복원된 형상들을 점진적으로 융합하여 전체 형상을 생성하는 기법을 제안한다. 영상의 각 프레임에서 공통적으로 추적된 특징점들을 이용하여 형상을 추정한다. 3차원 좌표 추정 방법으로 개선된 직교분해기법을 사용하였다. 개선된 직교분해기법에서는 3차원 좌표를 복원함과 동시에 카메라의 위치와 방향을 계산할 수 있다. 복원된 부분 형상의 융합을 통해 입체적인 전체 형상을 만든다. 복원된 부분 데이터들의 서로 다른 좌표계를 기준 좌표계로 변환하여 하나의 전체 형상으로 융합한다. 형상 추정 과정과 융합 과정이 통합적으로 수행되며 반복적 최적화 작업을 수행하지 않고 선형적으로 이루어진다. 이는 기존 융합 방법인 ICP(Iterative Closest Point) 방법보다 융합 속도를 향상시켜 빠른 형상 복원이 가능하다. 융합 시간은 평균 0.01초 이내의 수행 속도를 보이며 융합의 오차는 평균 1.0mm 이하의 오차를 보였다.

• 대한전자공학회논문지SD
• /
• 제46권2호
• /
• pp.64-70
• /
• 2009

0.13-um CMOS 공정을 이용하여 3GHz에서 6.2dB의 gain을 갖는 피드포워드 이퀄라이저를 구현하고 14.7dB의 감쇄를 갖는 7-m SATA 케이블을 통해 6Gbps의 데이터를 에러 없이 복원하였다. 제안한 이퀄라이저 회로는 varactor의 차동 연결을 통해서 기존 이퀄라이저에서 사용되는 varactor 면적의 1/4만을 사용하도록 설계되어 pad-frame에 집적할 수 있을 뿐만 아니라, 높은 동작 주파수 및 3.6mW의 낮은 전력 소모를 유지할 수 있다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.332-332
• /
• 2010

We have successfully demonstrated the inkjet printing method to create $Al_2O_3$ films withouWe have successfully demonstrated the inkjet printing method to create $Al_2O_3$ films without a high temperature sintering process. In order to remove the coffee ring effect in the ink drop, we have introduced a co-solvent system in order to create Marangoni flow in the ink drop, which leads to the dense packing of ceramic powders on the substrate during inkjet process. The packing density of the Inkjet-printed $Al_2O_3$ films is around 60% (max. 70%) which is very high compared to the value obtained from the same material films by other conventional methods such as film casting, dip coating process, etc. The voids inside the films (which are around 40% of the entire film volume) are filled with the polymer resin (Cyanate ester) by the infiltration process. This resin infiltration is also implemented by the inkjet printing process right after the Ah03 film ink-jetting process. The microstructures of the printed $Al_2O_3$ films are investigated by Scanning Electron Microscope (SEM) to understand the degree of packing density in the printed films. The inkjet-printed $Al_2O_3$ films have been characterized to investigate its thickness and roughness. Quality factor of the printed $Al_2O_3$ film is also measured to be over 300 at 1MHz.

• 한국공간정보시스템학회 논문지
• /
• 제11권1호
• /
• pp.17-24
• /
• 2009

최근 웹 2.0의 서비스들이 사용자의 적극적인 참여를 통해 발전해가며 기존 공급자 위주의 수동적인 서비스와 차별화되듯이 국토정보 분야에서도 공급자 위주의 정적인 서비스는 사용자 참여가 가능한 동적인 지리공간 웹(Geoweb) 서비스로 발전되고 있다. 또한 공공과 민간에 산재되어 있는 데이터와 기능들을 통합하여 다양한 서비스를 개발하며, 이들의 통합 및 확장 자체를 보다 쉽게 해주고, 급변하는 지리공간 웹 환경에 신속하게 대응할 수 있도록 하기 위한 기술의 개발이 요구되고 있다. 본 연구에서는 지리공간 웹 분야의 다양한 국토정보 데이터 및 서비스 통합과 관련한 기술동향을 고찰하고, 개방형 인터페이스의 국토정보 서비스 플랫폼 기술 개발을 수행하였다. 그 결과 개방형 인터페이스의 2D/3D 지도 서비스 엔진, 사용자 참여형 매쉬업 엔진 및 Open API(Application Programming Interface) 통합 검색 엔진 등 플랫폼의 핵심요소들을 개발하였다. 개방형 인터페이스의 국토정보 서비스 플랫폼은 공공/민간 GIS(Geographic Information System) 통합, u-City 사업, 민간 GIS/LBS(Location Based Service) 서비스 등 다양한 분야에서 공통의 기반 플랫폼으로 널리 활용될 수 있을 것으로 기대된다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제25권10호
• /
• pp.1357-1363
• /
• 2012

Pigs may need to be exploited as xenotransplantation donors due to the shortage of human organs, tissues and cells. Porcine endogenous retroviruses (PERVs) are a significant obstacle to xenotransplantation because they can infect human cells in vitro and have the potential for transmission of unexpected pathogens to humans. In this research, 101 pigs, including four commercial breeds (23 Berkshire, 13 Duroc, 22 Landrace and 14 Yorkshire pigs), one native breed (19 Korean native pigs) and one miniature breed (10 NIH miniature pigs) were used to investigate insertional variations for 11 PERV loci (three PERV-A, six PERV-B and two PERV-C). Over 60% of the pigs harbored one PERV-A (907F8) integration and five PERV-B (B3-3G, B3-7G, 742H1, 1155D9 and 465D1) integrations. However, two PERV-A loci (A1-6C and 1347C1) and one PERV-B locus (B3-7F) were absent in Duroc pigs. Moreover, two PERV-C loci (C2-6C and C4-2G) only existed in Korean native pigs and NIH miniature pigs. The results suggest that PERV insertional variations differ among pig breeds as well as among individuals within a breed. Also, the results presented here can be used for the selection of animals that do not have specific PERV integration for xenotransplantation research.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1998년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.153-158
• /
• 1998

Since the mid-1990′s, researches on 3D GIS have been regarded as one of main issues both in the academic sites and commercial vendors; recently, some prototyped systems or the first versioned software systems of commercial basis are being reported and released. Unlike conventional 2D GIS, which consists in intelligent structured GIS or desktop GIS, every 3D GIS has its own distinguished features according to data structure-supporting capability, GIS-styled functionality, external database accessibility, interfacing extents with 2D GIS, 3D visualization/texture mapping ability, and so forth. In this study, technical aspects related to system development, SERI-Web3D GIS ver. 1.2, are explained. Main features in this revised 3D GIS can be summarized: 2-tier system model(client-server), VGFF(Virtual GIS File Format), internal GIS import, Feature manager(zoning, layering, visualization evironment), Scene manager(manage 3D geographic world), Scene editor, Spatial analyzer(Intersect, Buffering, Network analysis), VRML exporter. While, most other 3D GISes or cartographic mapping systems may be categorized into 3D visualization systems handling terrain height-field processing, 2D GIS extension modules, or 3D geometric feature generation system using orthophoto image: actually, these are eventually considered as several parts of "real 3D GIS". As well as these things, other components, especially web-based 3D GIS, are being implemented in this study: Surface/feature integration, Java/VRML linkage, Mesh/Grid problem, LOD(Level of Detail)/Tiling, Public access security problem, 3-tier architecture extension, Surface handling strategy for VRML.

• 한국토양비료학회지
• /
• 제48권5호
• /
• pp.522-527
• /
• 2015

Decision of available soil depth based on soil physical and hydraulic properties for the $3^{rd}$ Landscape Vegetation Project in the Incheon International Airport was attempted. The soil samples were collected from the 8 sites at different depths, 0-20 and 20-60cm, for the three project fields, A, B, and C area. Physical and chemical properties including particle size distribution, organic matter content and electrical conductivity were analyzed. Hydrological properties including bulk density and water holding capacity at different water potential, -6 kPa, -10 kPa, -33 kPa, and -1500 kPa were calculated by SPAW model of Saxton and Rawls (2006), and air entry value was calculated by Campbell model (1985). Based on physical and hydrological limitation, feasibility and design criteria of soil depth for vegetation and landfill were recommended. Since the soil salinity of the soil in area A area was $19.18dS\;m^{-1}$ in top soil and $22.27dS\;m^{-1}$ in deep soil, respectively, landscape vegetation without amendment would not be possible on this area. Available soil depth required for vegetation was 2.51 m that would secure root zone water holding capacity, capillary fringe, and porosity. Available soil depth required for landscape vegetation of the B area soil was 1.51 m including capillary fringe 0.14 m and available depth for 10% porosity 1.35 m. The soils in this area were feasible for landscape vegetation. The soil in area C was feasible for bottom fill purpose only due to low water holding capacity.

• Structural Engineering and Mechanics
• /
• 제14권4호
• /
• pp.455-472
• /
• 2002

The paper involves the study on the elastic and elasto-plastic stress wave propagation in the 1-D and 2-D solid media. The Smooth Particle Hydrodynamics equations governing the elastic and elasto-plastic large deformation dynamic response of solid structures are presented. The proposed additional stress points are introduced in the formulation to mitigate the tensile instability inherent in the SPH approach. Both incremental rate approach and leap-frog algorithm for time integration are introduced and the new solution algorithm is developed and implemented. Two examples on stress wave propagation in aluminium bar and 2-D elasto-plastic steel plate are included. Results from the proposed SPH approach are compared with available analytical values and finite element solutions. The comparison illustrates that the stress wave propagation problems can be effectively solved by the proposed SPH method. The study shows that the SPH simulation is a reliable and robust tool and can be used with confidence to treat transient dynamics such as linear and non-linear transient stress wave propagation problems.

• Nuclear Engineering and Technology
• /
• 제55권12호
• /
• pp.4570-4575
• /
• 2023

Noise and Radio-frequency interference or RFI causes a significant restriction on the Free induction Decay or FID signal detection of the Nuclear Quadrupole Resonance procedure. Therefore, using this method in non-isolated environments such as industry and ports requires extraordinary measures. For this purpose, noise reduction algorithms and increasing signal-to-noise-and-interference ratio or SNIR have been used. In this research, sodium nitrite has been used as a sample and algorithms have been tested in a non-isolated environment. The resonant frequencies for the 150 g of test sample were measured at 303 K at about 1 MHz and 3.4 MHz. The main novelty in this study was, (1) using two types of antennas in the receiver to improve adaptive noise and interference cancellation, (2) using a separate helical antenna in the transmitter to eliminate the duplexer, (3) estimating the noise before sending the pulse to calculate the weighting factors and reduce the noise by adaptive noise cancellation, (3) reject the interference by blanking algorithm, (4) pulse integration in the frequency domain to increase the SNR, and (5) increasing the detection speed by new pulse integration technique. By interference rejection and noise cancellation, the SNIR is improved to 9.24 dB at 1 MHz and to 7.28 dB at 3.4 MHz, and by pulse integration 44.8 dB FID signal amplification is achieved, and the FID signals are detected at 1.057 MHz and 3.402 MHz at room temperature.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.1062-1065
• /
• 2002

We demonstrate the MMIC(monolithic microwave integrated circuit) frequency doublers generating stable and low-cost 29 ㎓ local oscillator signals from 14.5 ㎓ input signals. These devices were designed and fabricated by using the MMIC integration process of 0.1 $\mu\textrm{m}$ gate-length PHEMTs (pseudomorphic high electron mobility transistors). The measurements showed S$\_$11/ of -9.2 dB at 14.5 ㎓, S/sub22/ of -18.6 dB at 29 ㎓ and a minimum conversion loss of 18.2 dB at 14.5 ㎓ with an input power of 6 dBm. The fundamental signal of 14.5㎓ was suppressed below 15.2 dBc compared with the second harmonic signal at the output port, and the isolation characteristics of the fundamental signal between the input and the output port were maintained above 30 dB in the frequency range of 10.5 ㎓ to 18.5 ㎓.