• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.44 no.1
• /
• pp.85-93
• /
• 2024

The monitoring of environmental information (e.g. noise, dust, vibration, temperature, humidity) is crucial to the safe and sustainable operation of a construction site. However, commercial sensors exhibit certain drawbacks when applied on-site. First, the installation cost is prohibitively high. Second, these sensors have been engineered without considering the rugged and harsh conditions of a construction site, resulting in error-prone sensing. Third, construction sites are compelled to allocate additional resources in terms of manpower, expenses, and physical spaces to accommodate individual sensors. This research developed an integrated sensing module to measure the environmental information in construction site. The sensing module slashes the installation cost to 3.3%, is robust enough to harsh and outdoor sites, and consolidates multiple sensors into a single unit. The sensing module also supports GPS, LTE, and real-time sensing. The evaluation showed remarkable results including 97.5% accuracy and 99.9% precision in noise measurement, an 89.7% accuracy in dust measurement, and a 93.5% reliability in data transmission. This research empowers the collection of substantial volumes and high-quality environmental data from construction sites, providing invaluable support to decision-making process. These encompass objective regulatory compliance checking, simulations of environmental data dispersion, and the development of environmental mitigation strategies.

• ETRI Journal
• /
• v.27 no.3
• /
• pp.337-340
• /
• 2005

A spot-size converted Fabry-Perot laser diode (LD) was flip-chip bonded to a silica-terraced planar lightwave circuit(PLC) platform to examine the effect of the silica terrace on the heat dissipation of the LD module. From the measurement of the light-current characteristics, it was discovered that the silica terrace itself is not a strong thermal barrier, but the encapsulation of the integrated LD with an index-matching polymer resin more or less deteriorates the heat dissipation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.2
• /
• pp.228-233
• /
• 2000

It is common to apply the technology of FPGA (Fie이 Programmable Gate Array) which is one of the design methods for ASIC(Application Specific IC)to the active components used in the data processing at the digital system of satellite aircraft missile etc for compact lightness and integration of Printed Circuit Board (PCB) In carrying out the digital data processing the FPGAs are designed for the various functions of the Process Control Interrupt Control Clock Generation Error Detection and Correction (EDAC) as the individual module. In this paper an FPGA chip for Single Error Correction and Double Error Detection (SEC-DED) for EDAC is designed and simulated by using a VLSI design software LODECAP.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.3
• /
• pp.307-322
• /
• 1992

For designing the radar integrated data network, we construct the network structure with a spatial hieratchy decomposition scheme. The RIDN can be decomposed into several subent classes, those of which are composed of the several group classes of radar sites, In a group class. The communication nodes of a radar site are modeled by the software modules formulated with the statistical attributes of discrete events. And we get the analysis over the network through the separately constructed infra group level models which were coded with the C language.From the result of the simulation. We could findthe fact that the data integration system;s performance approaches to the theordtically calculated value after being stable. And also we could get the packet processing status of a communication module’s inner processor which is difficult to oberve through the mathematical calculation tin the subnet model of the integrated data network.

• IE interfaces
• /
• v.16 no.4
• /
• pp.432-440
• /
• 2003

The inter-organizational business process is one of the hot issues in B2B e-commerce. In this paper, through the survey of the inter-organizational business process integration and the analysis of B2Bi related standards, e.g., BPML, WSDL, WSCI, and BPSS, we propose a method of linking BPML and BPSS specifications that can be used to integrate private processes with the public processes among enterprises. We also suggest an application example of the method by redefining a PIP of RosettaNet to the BPSS specification. The basic principle of the method is to maintain the independency of the existing BPML and BPSS applications and to construct an intermediary transformation module between the two applications.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.4
• /
• pp.768-772
• /
• 2007

Integration of RF front end module(FEM) into the antenna has been investigated in USPCS band (1.88GHz-1.99GHz). The FEM consists of input filter, power amplifier, coupler, power detector, bias switch and duplexer. The antenna was designed in planar inverted F antenna(PIFA) structure to implement it inside the handset. In order to avoid strong coupling between the antenna and FEM, a shielding ground layer was placed between them. The antenna size is 19mm by 10mm by 6mm under which FEM whose size is 8mm by 5mm by 1.5m locates. The antenna impedance was selected to match to FEM having better efficiency rather than gain since FEM has enough gain whose system spec is minimum of 20dB. The antenna patterns are shown with and without FEM.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05b
• /
• pp.708-711
• /
• 2012

기존 패턴 및 데이터베이스 검색, 페이지 단위 문자열 검색기법은 단순 검색으로 오탐율이 많아 검색 결과에 대한 신뢰성이 떨어지고, 동일 조건을 다른 검색기법에 추가로 시행함으로 인해 자원 낭비 및 시간 낭비를 초래하고 있다. 따라서 본 논문에서는 정규식 구문 기법과 상관 분석 기법을 연동시킨 통합형 정보 검색을 설계하여 경제적인 효과와 신뢰성을 확보하는 보안형 정보 검색 시스템의 기반기술을 제안하고자 한다.

• Proceedings of the KIEE Conference
• /
• 2005.11b
• /
• pp.211-213
• /
• 2005

In this Paper, our goal is program's completion which has graphical user interface. During that profess we will implement graphic module and apply It for network devices. We will construct integration system between embedded modules and window's components. In conclusion this paper explain you how to make graphical simulator in electrical engineering.

• Journal of the Korea Safety Management & Science
• /
• v.3 no.3
• /
• pp.165-174
• /
• 2001

Internet is a global network and it produces many terminologies involved in Electronic Commerce. Among many terms people very much talked about Cyber Shopping Mall. Under situation customers and sellers paid attention to Cyber Shopping Mall which is beyond time and space. This study deals with two subjects to enlarge the competitive power of Mall & Malls which is integration of multiple Cyber Shopping Mall. First subject is constructing the Automated Mall Wizard which is efficiently and effectively building Cyber Shopping Mall Site. And second subject is to differentiate from other shopping malls. Automated Mall Wizard is composed of three stages which are decomposed into several descriptive steps. And descriptive steps takes form of independent module, so it is considered to maximize Cyber Shopping Mall differentiation. Additional functions are making the goods category, related goods to be simultaneously ordered, price comparison with other sites within the Mall & Malls, best seller goods, store advertisement, substitutive goods, and mileage policy. As a result of that, we can respect SuperMall is better than other Mall & Mall as to diversity and flexibility of constructed Cyber Shopping Mall.

• The Journal of Information Systems
• /
• v.18 no.3
• /
• pp.231-249
• /
• 2009

Recently, plant construction industries are enjoying a favorable business climate centering around developing countries and oil producing countries rich in oil money. This paper proposes a methodology of implementing case-based reasoning(CBR) system for managing knowledge like lessons learned and various documents accumulated in performing power plant construction projects which are receiving a lot of order from foreign countries such as the Middle East, etc. Our methodology is consisted of 10 steps : user requirement gathering, information modeling, case modeling, case base design, similarity function design, user interface design, case base building, CBR module development, user interface implementation, integration test. Also, to illustrate the effectiveness of proposed methodology, the real CBR system is implemented for the plant business division of 'H' company which has international competitiveness in the field of plant construction industry. At present, the implemented CBR system is successfully utilizing as storing, sharing, and reusing knowledge which is accumulated in performing power plant construction projects in the target enterprise.