• ETRI Journal
• /
• 제32권2호
• /
• pp.327-329
• /
• 2010

A fully integrated small form-factor HBT power amplifier (PA) was developed for UMTS Tx applications. For practical use, the PA was implemented with a well configured bottom dimension, and a CMOS control IC was added to enable/disable the HBT PA. By using helix-on-pad integrated passive device output matching, a chip-stacking technique in the assembly of the CMOS IC, and embedding of the bulky inductive lines in a multilayer substrate, the module size was greatly reduced to 2 mm ${\times}$ 2.2 mm. A stage-bypass technique was used to enhance the efficiency of the PA. The PA showed a low idle current of about 20 mA and a PAE of about15% at an output power of 16 dBm, while showing good linearity over the entire operating power range.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 봄 학술발표회논문집
• /
• pp.397-404
• /
• 2000

The research of the computer-aided analysis and design of steel structures has continuously evolved. Despite the importance of connection in steel structures, the design process of connections is inefficient in present. The purpose of this study is to help engineer in connection design process. In this paper, prototype of automatic connection design module in integrated system for steel structures is proposed. The main methodology is based on bottom-up approach to simplify and formalize product model. Expert system is used to help engineer for selecting steel connection type. Object-oriented analysis and modeling will improve the expansion of knowledge-base. The design for connection was done according to the design specifications of connections of AISC

• 한국전자거래학회지
• /
• 제6권1호
• /
• pp.69-81
• /
• 2001

No organization can survive in today's modern society of information and high technology without internet and/or intranet. International convention industry is one of many high-technology dependent fields today which have started gathering new attention since the new millennium had begun. According to our survey, no professional convention organizer has used so far any type of integrated information system which is the vital source of support of the convention industry. Only the general purpose office softwares have been in use. The main purpose of this study is to design a model for ICIMS(International Convention Information Management System) to manage all the related information of international convention in a systematic and integrated way and to implement its prototype. International convention system in general had been analyzed to enhance the level of accuracy of the model for ICIMS. A simulation of an international conference was conducted to test the core module of the ICIMS model.

• 전기학회논문지
• /
• 제59권1호
• /
• pp.76-81
• /
• 2010

This paper describes the development of integrated simulator with GUI(Graphic User Interface) for traction power supply system. This simulator consists of a lot of calculation modules such as TPS, train time schedule, line constant, and power supply system analysis. Each module has input and output structure respectively. The algorithms of all modules have confirmed the validity to comparison with field test that is performed on both high speed railway line and conventional line.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1475-1480
• /
• 2007

In the last few years, lasers have found new applications in production engineering as tools for surface treatment, cutting, welding, drilling and marking. So far, the laser has mainly been used in special laser processing machines ('laser-only') directly integrated into a production line or serving as stand-alone stations in the workshop. By combining conventional metal cutting technologies with laser processes in one machine, complete processing of a workpiece with different technologies in one setting can be realized. The main advantages are a reduction of the material flow between the production machines, which leads to a reduction in processing time and logistics, and an enhancement of manufacturing quality due to the processing in one setting. In addition to this approach new processing technologies such as laser-assisted machining are possible.

• 경영과학
• /
• 제16권1호
• /
• pp.173-186
• /
• 1999

Recently many firms are introducing the cellular manufacturing system(CMS) as a means of achieving manufacturing efficiencies. However, most of the research on CMS was mainly for determining the cell formation problems. Since the goal of the CMS is not only a increase production efficiencies, but also to enhance the competitive stength of a firm, it would be reasonable to assume CMS as a business reengineering module rather than an independent technique. The purpose of this study is to align the CMS with reengineering, to present an integrated methodology for constructing the CMS, and to apply the CMS to a firm and verify it. The paper concludes with a brief description of the lessons learend by the CMS project and the limitations of the research are described.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 춘계학술대회
• /
• pp.263-266
• /
• 1997

The purpose of this paper is the development of Integrated Bio-signal Management System. (IBMS) using the network. IBMS is the system to manage the medical signals that measured from the each independent medical measurement system module. Each has a LAN Card. We developed the Network Application using Socket Library. Also, we developed the Graphic User Interface software for IBMS using Visual C++ on Windows 95.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 추계학술대회 논문집
• /
• pp.147-148
• /
• 2012

Recently, hybrid generation systems combine multiple energy sources or storage components to optimize the characteristics of the individual energy sources. In this paper, a battery integrated PV power optimizer for PV-battery hybrid power generation system is proposed. PV system using proposed topology can easily increase battery capacity and remove high power bidirectional converter to control bulky battery bank.

• 한국ITS학회 논문지
• /
• 제4권1호
• /
• pp.73-79
• /
• 2005

In this paper, a circuit for detecting a fine oscillation in an integrated PCS and W-CDMA receiver is presented. The advantages for this design are small size and flexible compatibility for system operation compared with the conventional method. The fine oscillation level can be detected by dB unit through selecting the receiver mode as PCS of 1.8 GHz range or W CDMA of 1.9 GHz range by a RF switch and monitoring the corresponding frequency band. Also, the circuit is designed to be flexible for other communication systems with the consideration of the required dynamic range of 75 dB.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.821-825
• /
• 1991

This paper presents an architecture and control logic of a Flexible Manufacturing Cell (FMC) which is one of the important elements under Computer Integrated Manufacturing (CIM) environment. To implement FMC, it is very important to develop a software which can control and monitor the overall system in an integrated environment. Our primary concern in this research is not to develop individual systems, but to integrate them in the hierarchical control level. Progress on the research of integrating CAD/CAM, Process Planning, Off-line Robot Programming and Simulation module into FMC control system is reported. FMC hardware system used here has an Automated Storage & Retrieval System (AS/RS), a conveyor system, a transfer robot, a CNC milling machine, a bar-code system, and an IBM PC/AT as Cell Control System (CCS). In order to demonstrate the operational result, the name plates, text-carved aluminium plates, are manufactured by this system.