• Convergence Security Journal
• /
• v.15 no.2
• /
• pp.3-9
• /
• 2015

The development of the digital compression technology and the broadcasting receiver's processing power make it possible to apply a multi-view function to the broadcasting services. The multi-view function is usually utilized to provide simultaneously several programs to viewers or to implement a multi-angle service of a sports program that allows a viewer to choose a video of his/her prefer viewpoint. The paper proposes an integrated method for utilizing a multi-view function in the digital broadcasting environment in which more than 100 programs are on air and there may be various data services which want to use multi-view video clips. For the purpose, a method of composing and transmitting multi-view videos and related information has been devised and a Java API to utilize the rapid editing function of a decoding chip-set has been implemented to clip, resize, and display parts of the multi-view videos.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.9
• /
• pp.985-991
• /
• 2008

This paper presents a novel balanced mixer receiver front-end design based on a metamaterial structure applicable to differential-/common-mode excitation. This metamaterial structure functions as a leaky-wave antenna and provides in-trinsic common-mode suppression. Low LO leakage and high RF to LO isolation are achieved without additional filters for LO and RF paths. The metamaterial is based on a unit-cell which under a differential-mode excitation behaves like a composite right/left-handed(CRLH) metamaterial. In contrast, the metamaterial unit-cell is below cut-off under a common-mode excitation. Experimental results are used to verify the proposed metamaterial's differential-/common-mode characteristics. The metamaterial is integrated with a balanced mixer design resulting in an operation frequency range of $1.96{\sim}2.40$ GHz with an optimum mixer conversion loss of 21.1 dB at 2,4 GHz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.7A
• /
• pp.603-610
• /
• 2005

Beam-forming method based on the estimated channel information at the base station degrade the performance mismatching directional vector in case of systems which Frequency Division Duplex (FDD) center frequency of uplink and downlink are different. Also blind estimation technique which is to obtain directional vector of reverse link through received signal has disadvantage of hardware complexity increase. To solve these problems, in present paper, a smart antenna algorithm which is to improve the beam-forming complexity increase due to user number by appling the spatial fourier transform to be able to beam- forming toward a wanted direction through adjusting a obtained uplink weight function by estimating Angle-of-Arrival (AoA) to the competable form at the downlink is proposed. The proposed algorithm is integrated to the CDMA downlink transmitter and simulations are performed to confirm the performance as frame error rate at the receiver. As a result, the beam forming effect is confirmed and the performance gain with the proposed algorithm is comparable to ordinary smart antenna system.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.61-64
• /
• 2002

We have optimally designed and implemented by a monolithic microwave integrated circuit(MMIC) the low noise amplifier(LNA) of 5.8GHz band composed of receiver front-end(RFE) in a on-board equipment system for dedicated short range communication using a depletion-mode GaAs MESFET. The LNA is provided with two active devices, matching circuits, and two drain bias circuits. Operating at a single supply of 3V and a consumption current of 18㎃, The gain at center frequency 5.8GHz is 13.4dB, Noise figure(NF) is 1.94dB, Input 3rd order intercept point(lIPS) is 3dBm, and Input return loss(5$_{11}$) and Output return loss(S$_{22}$) is -l8dB and -13.3dB, respectively. The circuit size is 1.2$\times$O.7$\textrm{mm}^2$.EX>.>.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.1
• /
• pp.75.1-75.1
• /
• 2012

We have observed the part of the second quadrant of the Galactic Plane in $^{13}CO(1-0)$ using the multibeam receiver system installed on the 14 m telescope at Taeduk Radio Astronomy Observatory. The target region (L=108 to 112.5) is the part of the $^{12}CO$ Outer Galactic Plane Survey (Heyer et al. 1998), and it is for the exact Galactic plane with the latitude range of +1 and -1 degree. Total of 48,000 spectra (about 9 square degees) were obtained on 50" grid. The selected velocity resolution is 0.63 km/sec and sensitivity per channel is 0.17 K, and the covered velocity is 320 km/sec. We developed a new reduction method, which effectively deals with a relatively noisy 3-dimensional database. The collected $^{13}CO$ database will be manipulated with pre-existing $^{12}CO$ data to get several physical parameters. As it is located in the second quadrant, the kinematic distances of the individual clouds, which will be identified, can be estimated relatively easily without any distance ambiguity. In this meeting we present the reduction method, statistics, and some channel maps, integrated intensity maps, and spatial-velocity maps. We intend to clarify any difference of their characteristics between the clouds in the Outer Galaxy and Inner Galaxy using our data base.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.3 no.2
• /
• pp.89-95
• /
• 2003

In this paper, we have designed and fabricated high conversion gain Q-band active sub-harmonic mixers for a receiver of millimeter wave wireless communication systems. The fabricated active sub-harmonic mixer uses 2nd harmonic signals of a low local oscillator (LO) frequency. The fabricated mixer was successfully integrated by using $0.1{\;}\mu\textrm{m}$GaAs pseudomorphic high electron mobility transistors (PHEMTs) and coplanar waveguide (CPW) structures. From the measurement, it shows that maximum conversion gain of 4.8 dB has obtained at a RF frequency of 40 GHz for 10 dBm LO power of 17.5 GHz. Conversion gain from the fabricated sub-harmonic mixer is one of the best reported thus far. And a phase noise of the 2nd harmonic was obtained -90.23 dBc/Hz at 100 kHz offset. The active sub-harmonic mixer also ensure a high degree of isolations, which are -35.8 dB from LO-to-IF and -40.5 dB from LO-to-RF, respectively, at a LO frequency of 17.5 GHz.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.14
• /
• pp.5883-5888
• /
• 2014

Background: Breast cancer is the most common cancers in female populations. The exact cause is not known, but is most likely to be a combination of genetic and environmental factors. Log-logistic model (LLM) is applied as a statistical method for predicting survival and it influencing factors. In recent decades, artificial neural network (ANN) models have been increasingly applied to predict survival data. The present research was conducted to compare log-logistic regression and artificial neural network models in prediction of breast cancer (BC) survival. Materials and Methods: A historical cohort study was established with 104 patients suffering from BC from 1997 to 2005. To compare the ANN and LLM in our setting, we used the estimated areas under the receiver-operating characteristic (ROC) curve (AUC) and integrated AUC (iAUC). The data were analyzed using R statistical software. Results: The AUC for the first, second and third years after diagnosis are 0.918, 0.780 and 0.800 in ANN, and 0.834, 0.733 and 0.616 in LLM, respectively. The mean AUC for ANN was statistically higher than that of the LLM (0.845 vs. 0.744). Hence, this study showed a significant difference between the performance in terms of prediction by ANN and LLM. Conclusions: This study demonstrated that the ability of prediction with ANN was higher than with the LLM model. Thus, the use of ANN method for prediction of survival in field of breast cancer is suggested.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.5
• /
• pp.535-544
• /
• 2009

Signals from the Global Positioning System(GPS) satellite are used to retrieve the integrated amount of water vapor or the precipitable water vapor(PWV) along the path between a transmitting satellite and ground-based receiver. In order to retrieve the PWV from GPS signal delay in the troposphere, the actual zenith wet delay, which can be derived by extracting the zenith total delay and subtracting the actual zenith hydrostatic delay computed using surface pressure observing, will be needed. Since it has been not co-located between GPS permanent station and automated weather station, the air-pressure on the mean sea level has been used to determine the actual zenith hydrostatic delay. The directly use of this air-pressure has been caused the dilution of precision on GPS PWV retrieval. In this study, Korean reverse sea level correction method of air-pressure was suggested for the improving of GPS PWV retrieval capability and the accuracy of water vapor estimated by GPS was evaluated through a comparison with radiosonde PWV.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.4
• /
• pp.7-13
• /
• 2011

In this paper, the IC(Integrated Circuit) for multi-channel synchronous communication was designed by using FPGA and VHDL language. The existing chips for synchronous communication that has been used commercially are composed for one to two channels. Therefore, when communication system with three channels or more is made, the cost becomes high and it becomes complicated for communication system to be realized and also has very little buffer, load that is placed into Microprocessor increases heavily in case of high speed communication or transmission of high-capacity data. The designed IC was improved the function and performance of communication system and reduced costs by designing 8 synchronous communication channels with only one IC, and it has the size of transmitter/receiver buffer with 1024 bytes respectively and consequently high speed communication became possible. It was designed with a communication signal of a form various encoding. To detect errors of communications, the CRC-ITU-T logic and channel MUX logic was designed with hardware logics so that the malfunction can be prevented and errors can be detected more easily and input/output port regarding each communication channel can be used flexibly and consequently the reliability of system was improved. In order to show the performance of designed IC, the test was conducted successfully in Quartus simulation and experiment and the excellence was compared with the 85C3016VSC of ZILOG company that are used widely as chips for synchronous communication.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.4
• /
• pp.93-99
• /
• 2010

Since the facility management for various facilities in urban area are conducted by general managers who have poor knowledge for surveying technology, it is not easy to trace the exact location of the facility in a short time with the GIS map only by themselves in the field. In order to improve it, VRS-RTK or SBAS DGPS system integrated with UMPC and PDA which is uploaded GIS field software are being used recently however lot of difficulties are still existed with the GPS positioning in urban area due to the lack of visible satellites, no reception of correction data and multipath error by the interruption of the high buildings and houses etc. Therefore, in this study, we applied with Network DGPS system which allows better reception of satellite signal and correction data even in dense housing areas with the use of GNSS receiver and CDMA mobile phone. Based on the analysis of field data, it was confirmed that standard deviations of the Network DGPS positioning are 0.3 to 0.84m with a very high positioning rate even in dense housing areas. Therefore, it was concluded that the Network DGPS system could be used widely to fast and accurate positioning for various facilities management works in dense housing areas in the future.