• Transactions on Electrical and Electronic Materials
• /
• 제12권6호
• /
• pp.253-257
• /
• 2011

This study was carried out to solve problems such as radio frequency band depletion, confusion risk, and security loss in existing visible wireless communication systems, and to determine the applicability of next-generation networks. A light-emitting diode (LED) light communication system was implemented with a controlling switching light module using the ATmega16 micro-controller. To solve the existing modulation effect and disturbance in visible light communication, an integrated interface was evaluated with a driving light module and analyzes its reception property. A transmitter/receiver using the ATmel's micro-controller, high-intensity white LED-6 modules, and infrared sensor KSM60WLM and visible sensor TSL250RD were designed. An experiment from the initial value of distance to 2.5 m showed 0.46 V of the voltage loss, and if in long distance, external light interference occurred and light intensity was lost by external impact and thus data had to be modified or reset repeatedly. Additionally, when we used 6 modules through the remote controller's lighting dimming, data could be transmitted up to 1.76 m without any errors during the day and up to 2.29 m at night with around 2~3% communication error. If a special optical filter can reduce as much external light as possible in the integrated interface, the LED for lighting communication systems may be applied in next generation networks.

• Journal of Positioning, Navigation, and Timing
• /
• 제13권1호
• /
• pp.75-83
• /
• 2024

In order to reduce the time and cost of developing a navigation system, a performance evaluation platform can be used. A User Interface (UI) is required to effectively evaluate the performance, which sets parameters and gives navigation sensor signals and data display, and also displays navigation results. In this paper, a LabVIEW-based UI design method for multi-integrated navigation systems is proposed and implementation results are presented. The UI consists of a signal and data generation part and a signal and data processing part. The signal and data generation part sets parameters for the signal and data generation and displays the navigation sensor signal and data generation results. The signal and data processing part sets parameters for the signal and data processing and displays the navigation results. The signal and data generation part and signal and data processing part are designed to satisfy the requirements of the UI for a performance evaluation of the navigation system. In order to show the usefulness of the proposed UI design method, parameters of the signal and data generation and the signal and data processing are set through the LabVIEW-based UI, and the Global Positioning System (GPS) signal and inertial measurement unit data generation results and the navigation results of a GPS Software Defined Receiver (SDR) and inertial navigation system are confirmed. The implementation results show that the proposed UI design method helps users conduct an effective performance evaluation of navigation systems.

• Korean Journal of Radiology
• /
• 제23권10호
• /
• pp.986-997
• /
• 2022

Objective: Whether metabolic redistribution occurs in patients with white matter hyperintensities (WMHs) on magnetic resonance imaging (MRI) is unknown. This study aimed 1) to propose a measure of the brain metabolic network for an individual patient and preliminarily apply it to identify impaired metabolic networks in patients with WMHs, and 2) to explore the clinical and imaging features of metabolic redistribution in patients with WMHs. Materials and Methods: This study included 50 patients with WMHs and 70 healthy controls (HCs) who underwent ¹⁸F-fluorodeoxyglucose-positron emission tomography/MRI. Various global property parameters according to graph theory and an individual parameter of brain metabolic network called "individual contribution index" were obtained. Parameter values were compared between the WMH and HC groups. The performance of the parameters in discriminating between the two groups was assessed using the area under the receiver operating characteristic curve (AUC). The correlation between the individual contribution index and Fazekas score was assessed, and the interaction between age and individual contribution index was determined. A generalized linear model was fitted with the individual contribution index as the dependent variable and the mean standardized uptake value (SUV_mean) of nodes in the whole-brain network or seven classic functional networks as independent variables to determine their association. Results: The means ± standard deviations of the individual contribution index were (0.697 ± 10.9) × 10^-3 and (0.0967 ± 0.0545) × 10^-3 in the WMH and HC groups, respectively (p < 0.001). The AUC of the individual contribution index was 0.864 (95% confidence interval, 0.785-0.943). A positive correlation was identified between the individual contribution index and the Fazekas scores in patients with WMHs (r = 0.57, p < 0.001). Age and individual contribution index demonstrated a significant interaction effect on the Fazekas score. A significant direct association was observed between the individual contribution index and the SUV_mean of the limbic network (p < 0.001). Conclusion: The individual contribution index may demonstrate the redistribution of the brain metabolic network in patients with WMHs.

• Journal of Yeungnam Medical Science
• /
• 제23권2호
• /
• pp.205-212
• /
• 2006

연구 배경: 고립성 폐결절의 30%~40%는 악성결절의 가능성이 높다. 따라서 고립성 폐결절의 악성감별이 무엇보다 중요하다. 최근 PET/CT가 악성 감별에 널리 사용되며, 또한 그 중요성이 커지고 있다. 이 연구의 목적은 integrated PET/CT의 여러 인자들을 비교하여 고립성 폐결절의 악성 여부를 구별하는데 유용한 지표를 찾기 위한 것이다. 재료 및 방법: 2005년 12월부터 2006년 4월까지 3 cm 미만의 고립성 폐결절로 내원한 환자 19명을 대상으로 하였다. 환자는 integrated PET/CT의 최대 SUV는 FDG 주입 후 1 시간, 2 시간에 측정하였다. 또한 대상 환자 모두 경피세침술로 조직검사를 하였다. Levene's test를 이용하여 integrated PET/CT에서, 조직검사로 확인된 양성결절과 악성결절의 SUV1, SUV2, 보존지수(retention index)의 차이를 비교하였다. 성적: 조직검사 결과 12명이 악성결절로 확인되었고, 7명은 양성결절로 진단되었다. SUV1(p=0.006)과 SUV2(p=0.022)는 양성결절보다 악성결절에서 높았으며 이들 값은 통계적으로 유의하였으나 보존지수는 유의한 차이가 없었다(p=0.526). ROC 곡선을 이용한 양성결절과 악성결절을 구분하는 기준값은 SUV1은 5.40, SUV2는 7.45였다. 이때 SUV1의 민감도는 66.7%, 특이도는 71.4%였으며, SUV2의 민감도는 75%, 특이도는 71.4%였다. 결론: 이상의 결과로 integrated PET/CT에서 일반적으로 널리 사용하고 있는 SUV1은 양성결절과 악성결절을 구별하는데 있어 유용하다는 것을 확인할 수 있었고, 아직 많이 연구되지 않은 SUV2 또한 통계학적으로 의미 있는 차이를 보임을 알 수 있었다. 양성결절과 악성결절을 구분하는 기준값은 각각 5.40, 7.45였다. 연구결과 고립성 폐결절의 악성여부를 구별하는데 SUV1, SUV2 모두 유용하게 사용될 수 있으나 SUV2가 SUV1에 비교하여 특이도는 같으나 더 높은 민감도를 나타내었다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 춘계학술발표회논문집
• /
• pp.39-44
• /
• 2004

In this thesis, two test flights were conducted in Gwacheon and Suwon area to evaluate the performance of accuracy and efficiency through the analysis of results among the three photogrammetric methods, that is, traditional photogrammetry, GPS -Photogrammetry and GPS/INS-Photogrammetry. Test results shows that a large variety of advantages of GPS-Photogrammetry and GPS/INS-Photogrammetry against traditional photogrammetry is to be verified. Especially, the number of ground control points for the exterior orientation could be saved more than 70-80%, and the cost for map production 30-50%, respectively. In addition, it was convinced that the large reduction of control points has not any effect on the block accuracy. It was also proved that the number of required ground control points for GPS/INS-Photogrammetry, is similar to that of GPS-Photogrammetry. Therefore it should be noted that GPS -Photogrammetry is more efficient in the aspect of reduction of mapping cost against GPS/INS-Photogrammetry, installing only an existing GPS receiver on survey aircraft to avoid high economic burden of procurement for integrated GPS/INS equipment.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
• /
• pp.270-273
• /
• 2000

We have fabricated and analyzed photodiodes for optical link with Si pin structures. As the results of experiment, the web patterned photodiode(type C) with $p^{+}$-guard ring showed low junction capacitance of 6~7 pF at $V_{R}$=-5V and high separation ability for optical signal(dark current : $\leq$ 5 nA, optical signal current : $\geq$ 340 nA) due to the small effective $p^{+}$-n junction area and the expanded electric field region. The fabricated Si pin photodiode can be applicable for detecting an optical signal with the wavelength of about 660~670 nm. It can also be integrated with the twin well CMOS structure to develope an one chip based optical receiver IC. IC.C.

• 천문학회보
• /
• 제40권2호
• /
• pp.44.1-44.1
• /
• 2015

We set up a project to make spectrometers for single dish observations of the Korean VLBI Network (KVN), a new future multi-beam receiver of the ASTE (Atacama Submillimeter Telescope Experiment), and the total power (TP) antennas of the Atacama Large Millimeter/submillimeter Array (ALMA). Traditionally, spectrometers based on ASIC (Application-Specific Integrated circuit) and FPGA (Field-Programmable Gate Array) have been used in radio astronomy. It is, however, that a Graphics Processing Unit (GPU) technology is now viable for spectrometers due to the rapid improvement of its performance. A high-resolution spectrometer should have the following functions: poly-phase filter, data-bit conversion, fast Fourier transform, and complex multiplication. We wrote a program based on CUDA (Compute Unified Device Architecture) for a GPU spectrometer. We measured its performance using two GPU cards, Titan X and K40m, from NVIDIA. A non-optimized GPU code can process a data stream of around 2 GHz bandwidth, which is enough for the KVN spectrometer and promising for the ASTE and ALMA TP spectrometers.

• Journal of Electrical Engineering and Technology
• /
• 제2권3호
• /
• pp.294-299
• /
• 2007

This paper presents a special protection scheme, which was established in the KEPCO (Korea Electric Power Corporation) system, against a critically low voltage profile in a part of the system after a double-circuit tower outage. Without establishing the scheme, the outage triggers the operation of a zone 3 relay and trips the component. This sequence of events possibly leads to a blackout of the local system. The scheme consists of an inter-substation communication network using PITR (Protective Integrated Transmitter and Receiver) for acquisition of the substations' data, and under-voltage load shedding devices. This paper describes the procedure for determining the load shedding in the scheme and the experiences of the implementation.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 추계학술대회
• /
• pp.321-324
• /
• 2009

지상파 DMB는 이동 수신이 가능한 방송 서비스로 개인용, 휴대용, 이동형, 디지털 멀티미디어, 방송매체라는 특징을 가진다. 이와 같은 특징은 차량용 내비게이션과 일치하는 부분이 많아 내비게이션 결합형 지상파 DMB 수신기가 널리 보급되었다. 현재 차량 운전자들을 주 대상으로 하는 재난경보전달 시스템이 존재하지 않으므로, DMB 기능을 내장한 차량용 내비게이션은 재난경보 전달 체계를 서둘러 도입해야 하는 분야 중 하나다. 이 논문의 목적은 내비게이터형 DMB 수신기에 필요한 기능적 요구사항을 도출하는 것이다. 이를 위해 내비게이터형 DMB 수신기로 활용 가능한 시나리오를 연구하고, 이를 바탕으로 기본 수신기와는 별도로 추가되어야 할 내비게이터형 수신기를 위한 고유의 기능을 도출하고, 기본 수신기에서 도출한 기능 중 필요 없는 기능을 분석하였다. 이 논문의 내용은 내비게이터형 DMB 수신기를 개발하는 데 활용할 수 있을 것이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
• /
• pp.854-858
• /
• 1987

This paper considers impulsive noise which produce burst error in high speed(approx.160Kbps) data transmission like ISDN(Integrated Servise Digital Network) using PSTN(Public Switching Telephone Network). To begin with, we obtains the transfer function of subscriber line to calculate the variation of bandwidth when the gain of receiver is fixed and channel capacity of non-gaussian channel in upper-and lower bound, and evaluates the transmission capability. In this paper compares channel capacity bounds which obtains when probability density function of impulsive noise is Laplacian distribution function with impulsive noise generated by waveform synthesier.