• Korean Journal of Ecology and Environment
• /
• v.44 no.4
• /
• pp.327-336
• /
• 2011

Temporal and spatial variations of primary productivity were investigated in the estuary of Youngsan River and Mokpo coastal areas in 2009. After heavy rain, concentrations of ammonium, phosphate, and silicate increased at six stations in August. The torrential rainfall may cause an increase in nutrient concentrations during summer. There is no limitation of nutrients (except for February at the mid-Youngsan estuarine region YS2) but a potential phosphate limitation was apparent at all stations. Silicate depletion was observed at YS2 in February due to a massive diatom bloom. The trophic status of the Youngsan estuary and Mokpo coastal areas were inferred from an assessment of the primary productivity. In February and May, YS1 (upper Youngsan estuary site) and YS2, YS3 (near the Youngsan river estuary barrage), MP1 (upper Mokpo coastal region site) were appropriately assigned to the mesotrophic category. MP2 (mid-Mokpo coastal region site) and MP3 (outer site of Mokpo coastal region) were assigned to the oligotrophic category. All stations were classified to the oligotrophic status in November. In August, after heavy rain, Youngsan estuary stations maintained mesotrophic status. On the other hand, MP1 and MP2 were classified in the eutrophic category and MP3 to mesotrophic status. In particular, primary productivities of MP1 and MP2 were 9 and 7 times higher respectively than the standard of eutrophic status ($1,000-mgC\;m^{-2}d^{-1}$). These results suggest that a massive freshwater discharge from the Youngsan River estuary should be considered a main factor in the occurrence of phytoplankton bloom in Mokpo coastal areas during summer. Seasonal variations of primary productivity are closely related with depth-integrated Chl. a.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.131.1-131.1
• /
• 2010

This study was conducted for engineering optimization for the gasification process which is the key factor for success of Taean IGCC gasification plant which has been driven forward under the government support in order to expand to supply new and renewable energy and diminish the burden of the responsibility for the reduction of the green house gas emission. The gasification process consists of coal milling and drying, pressurization and feeding, gasification, quenching and HP syngas cooling, slag removal system, dry flyash removal system, wet scrubbing system, and primary water treatment system. The configuration optimization is essential for the high efficiency and the cost saving. For this purpose, it was designed to have syngas cooler to recover the sensible heat as much as possible from the hot syngas produced from the gasifier which is the dry-feeding and entrained bed slagging type and also applied with the oxygen combustion and the first stage cylindrical upward gas flow. The pressure condition inside of the gasifier is around 40~45Mpg and the temperature condition is up to $1500{\sim}1700^{\circ}C$. It was designed for about 70% out of fly ash to be drained out throughout the quenching water in the bottom part of the gasifier as a type of molten slag flowing down on the membrane wall and finally become a byproduct over the slag removal system. The flyash removal system to capture solid particulates is applied with HPHT ceramic candle filter to stand up against the high pressure and temperature. When it comes to the residual tiny particles after the flyash removal system, wet scurbbing system is applied to finally clean up the solids. The washed-up syngas through the wet scrubber will keep around $130{\sim}135^{\circ}C$, 40~42Mpg and 250 ppmv of hydrochloric acid(HCl) and hydrofluoric acid(HF) at maximum and it is turned over to the gas treatment system for removing toxic gases out of the syngas to comply with the conditions requested from the gas turbine. The result of this study will be utilized to the detailed engineering, procurement and manufacturing of equipments, and construction for the Taean IGCC plant and furthermore it is the baseline technology applicable for the poly-generation such as coal gasification(SNG) and liquefaction(CTL) to reinforce national energy security and create new business models.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.427-435
• /
• 2011

The information management system for the national R&D reports on the level of each government department have been operated in order to have special affiliated organizations collect detailed information, construct databases for R&D reports, and operate their information system; thus, the current classification system for the R&D reports on the governmental level is insufficient. Also, each department requires to prepare a standardized electronic original text service system since mutually different electronic original text services have been provided. therefore, this paper sets up the following research goals and detailed research contents. The goals of this study are to establish methods to standardize the forms of national R&D reports and suggest the framework for XML-based national R&D reports services by analyzing the problems in the forms of previous national R&D reports services. As detailed research contents, first, Identify the current R&D electronic original reports services by each government department. Second, this paper analyzed primary overseas science technology information service systems related with national research and development reports and related database schemata. this paper proposed the XML-based national R&D reports service framework through analyzing the problems in the framework of the existing national R&D reports service system and also established and suggested the methods to provide database schema design and report portal services. Lastly, it is expected that this paper will have academic contribution to enhancing R&D investment efficiency by utilizing collaboratively the information and resources related with national R&D through establishing the general information management system for national-dimension R&D reports and also managing science technology information efficiently and developing a user-centered integrated information system.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.7
• /
• pp.1015-1019
• /
• 2006

The peptide with structural similarity to mammalian substance P (M-SP) has been isolated from extract of the body of the African lungfish, Protopterus dolloi, using the rectum of the newt as the bioassay system. The primary structure of the SP-related peptide was identified as Lys-Pro-Arg-Pro-Asp-Gln-Phe-Tyr-Gly-Leu-Met-NH2 (L-SP) and contained four substitutions ($Lys^{1}\rightarrow $ Arg, $Arg^{3}\rightarrow$ Lys, $Asp^{5}\rightarrow$ Gln, and $Tyr^{8}\rightarrow$ Phe) compared with M-SP; this structure is identical to that of the peptide isolated from the gut of the Australian lungfish. Circular dichroism spectra showed that L-SP had an unordered structure in the buffer solution and phospholipid bilayers. This peptide was found to have an excitatory effect on rectal muscle tissues of newt, quail, and fish. L-SP also had a more potent vasodilatory effect on the guinea-pig aorta than that of M-SP. The identification of the peptide provides evidence that SP family, hitherto confined to mammals, have a widespread occurrence in lungfish.

• ALGAE
• /
• v.29 no.4
• /
• pp.321-331
• /
• 2014

Vertebrata lanosa is an abundant and obligate red algal epiphyte of Ascophyllum nodosum that forms part of a complex and highly integrated symbiotic system that includes the ascomycete, Mycophycias ascophylli. As part of ongoing studies to resolve interactions among species in the symbiosis, we used pulse amplitude modulation fluorimetry of chlorophyll a fluorescence, from photosystem II (PSII), to measure the maximum quantum yield ($F_v/F_m$) of PSII [$QY(II)_{max}$] and relative photosynthetic electron transport rates (rETR), as a function of light intensity, in order to evaluate the photosynthetic capacity of the two algal symbionts in the field and in the laboratory under different treatments. Our primary question was 'Is the ecological integration of these species reflected in a corresponding physiological integration involving photosynthetic process?' In the laboratory we measured changes in $QY(II)_{max}$ in thalli of V. lanosa and A. nodosum over one week periods when maintained together in either attached or detached treatments or when maintained separated from each other. While the $QY(II)_{max}$ of PSII of A. nodosum remained high and showed no significant variation among treatments, V. lanosa showed decreasing performance in the following conditions: V. lanosa attached to A. nodosum, V. lanosa in the same culture, but not attached to A. nodosum, and V. lanosa alone. These results are consistent with observations in which rETR was reduced in V. lanosa maintained alone versus attached to A. nodosum. Values for $QY(II)_{max}$ in V. lanosa measured in the field in fully submerged thalli were similar to those measured in the laboratory when V. lanosa was attached to it obligate host A. nodosum. Our results provide evidence of a physiological association of the epiphyte and its host that reflects the known ecology.

• Research in Plant Disease
• /
• v.25 no.4
• /
• pp.173-178
• /
• 2019

From our field investigation from 2017 to 2018, five diseases and four insect pests have been identified as the primary biotic stressors of fruit-producing mulberry, which include popcorn disease and mulberry sucker, respectively. In this study, we examined the relative control effects of selected agro-chemicals against the popcorn disease and mulberry sucker. Our systemic treatment methods to simultaneously control the popcorn disease and the mulberry sucker indicated that an integrated control method showed a superior result with the control efficacy of 89.3%, while a conventional control method resulted in 66.7%. As a result, we concluded that it is much efficient to control both disease and insect pest in mid-April while sequentially applying chemicals only for the popcorn disease from February. By considering the ecological aspects of the popcorn disease and mulberry sucker, this systemic treatment will be able to reduce the labor of growers required for the control.

• Journal of Intelligence and Information Systems
• /
• v.12 no.1
• /
• pp.57-73
• /
• 2006

This paper describes a methodology for automating the material handling equipment (MHE) evaluation and selection processes by combining knowledge-based rules and fuzzy multi-criteria decision making approach. The methodology is proposed to solve the MHE selection problems under fuzzy environment. At the primary stage, the most appropriate MHE type among the alternatives for each material flow link is searched. Knowledge-based rules are employed to retrieve the alternatives for each material flow link. To consider and compare the alternatives, multiple design factors are considered. These factors include both quantitative and qualitative measures. The qualitative measures are converted to numerical measures using fuzzy logic. The concept of fuzzy logic is applied to evaluation matrices used for the selection of the most suitable MHE through a fuzzy linguistic approach. Thus, this paper demonstrates the potential applicability of fuzzy theory in the MHE applications and provides a systemic guidance in the decision-making process.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.31 no.3
• /
• pp.12-25
• /
• 2018

Objectives : The purpose of this study is to analyze the use of herbal medicine for the treatment of urticaria in case studies and to find the general tendency of herbal medicine treatment and to establish the primary treatment direction of urticaria. Methods : In the domestic databases, Oriental medicine Advanced Searching Integrated System (OASIS), Korean Traditional Knowledge Portal (KTKP), National Discovery for Science Leader (NDSL), Research Information Sharing Service (RISS), we selected among the case study papers published in the last 20 years using search terms related to "urticaria". Reports related to Sasang Constitutional medicine were excluded and total of 15 papers were finally selected. Results : 23 prescriptions were retrieved from 15 papers. The most commonly used prescription was Seungmagalgeun-tang (升麻葛根湯), and Bangpoongtongsung-san (防風通聖散) and Pyeongwi-san (平胃散) were presented twice. Commonly used herbs are Glycyrrhizae Radix et Rhizoma (甘草), Zingiberis Rhizoma Recens (生薑), and Scutellariae Radix (黃芩). 18 out of 78 herbs are belonging to heat-clearing medicinal (淸熱藥) and 16 out of 78 herbs are belonging to exterior-releasing medicinal (解表藥). Concurrent therapies such as acupuncture, pharmacoacupuncture, moxibustion, cupping therapy, ice pack applying therapy were performed and several evaluation methods were used, patient's subjective remission rate was the most used. Conclusions : Through this study, we were able to discover the tendency of herbal medicine prescription for the treatment of urticaria.

• Nuclear Engineering and Technology
• /
• v.47 no.1
• /
• pp.11-25
• /
• 2015

The accident at Japan's Fukushima Daiichi nuclear power plant in March 2011, caused by an earthquake and a subsequent tsunami, resulted in a failure of the power systems that are needed to cool the reactors at the plant. The accident progression in the absence of heat removal systems caused Units 1-3 to undergo fuel melting. Containment pressurization and hydrogen explosions ultimately resulted in the escape of radioactivity from reactor containments into the atmosphere and ocean. Problems in containment venting operation, leakage from primary containment boundary to the reactor building, improper functioning of standby gas treatment system (SGTS), unmitigated hydrogen accumulation in the reactor building were identified as some of the reasons those added-up in the severity of the accident. The Fukushima accident not only initiated worldwide demand for installation of adequate control and mitigation measures to minimize the potential source term to the environment but also advocated assessment of the existing mitigation systems performance behavior under a wide range of postulated accident scenarios. The uncertainty in estimating the released fraction of the radionuclides due to the Fukushima accident also underlined the need for comprehensive understanding of fission product behavior as a function of the thermal hydraulic conditions and the type of gaseous, aqueous, and solid materials available for interaction, e.g., gas components, decontamination paint, aerosols, and water pools. In the light of the Fukushima accident, additional experimental needs identified for hydrogen and fission product issues need to be investigated in an integrated and optimized way. Additionally, as more and more passive safety systems, such as passive autocatalytic recombiners and filtered containment venting systems are being retrofitted in current reactors and also planned for future reactors, identified hydrogen and fission product issues will need to be coupled with the operation of passive safety systems in phenomena oriented and coupled effects experiments. In the present paper, potential hydrogen and fission product issues raised by the Fukushima accident are discussed. The discussion focuses on hydrogen and fission product behavior inside nuclear power plant containments under severe accident conditions. The relevant experimental investigations conducted in the technical scale containment THAI (thermal hydraulics, hydrogen, aerosols, and iodine) test facility (9.2 m high, 3.2 m in diameter, and $60m^3$ volume) are discussed in the light of the Fukushima accident.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.13 no.1
• /
• pp.1-8
• /
• 1984

The tools and techniques for measuring the spectral distribution of light emitted by, transmitted by, or reflected from food surfaces are described for determining the extent to which original natural color is preserved in processing and subsequent storage of foods. Color differences may be evaluated indirectly in terms of some physical characteristic of the sample or extracted fraction thereof that is largely responsible for the color characteristics. For evaluation more directly in terms of what the observer actually seen, color differences are measured by reflectance spectrophotometry and photoelectric colorimetry and expressed as differences in psychophysical indexes such as luminous reflectance and chromaticity. The standard system, against which other systems could be compared, is the one recommended by the International Committee on illumination and which is based on the 'standard observer', which is a simulated standard eye, consisting of three primary color filters Z, with X being essentially amber in color, Y, green and Z, blue. Any spectrophotometric curve of reflectance obtained from the surface of an object can be integrated in terms of X, Y and Z. Psychophysical notation may be converted by standard methods to the colorimetrically more descriptive terms of Munsell hue, value and chroma.