• 한국항해학회지
• /
• 제24권3호
• /
• pp.103-111
• /
• 2000

From a ship's safe operation point of view, it is very important to estimate the navigational safety in a seaway. The seakeeping performance can be defined as the ability of a ship to go to sea, and to accomplish its missions successfully and safely even in adverse environmental conditions. There are several factors presently adopted for evaluating seakeeping performance. But a hardware of the system considering all these factors has not been developed since some of them can not be measured by sensors. In this paper, a synthetic method of evaluating navigational safety is developed by measuring the vertical and lateral acceleration. An experiment by using real measuring carried out on board the T/S 'HANNARA' The equipment was measured every 4 hours for more than 30 minutes the acceleration by accelerometer, analyzed its acceleration values and calculated navigational dangerousness. As the results of this on board experiment, the system is carried conviction to be useful as evaluating seakeeping performance.

• 한국항해학회지
• /
• 제19권4호
• /
• pp.1-8
• /
• 1995

Although ship's draught information onboard is substantial for both the safety of navigation and the estimation of loaded cargoes, its accuracy depends, in conventional surveying method, on the skillfulness of observers and the condition of the sea surface round the vessel. To obtain more accurate information accessibly, measuring instruments with sophisticated sensors such as mechanical, electronic and ultrasonic transducers have been developed. However, they have still limitation in accuracy and in making up a system due to the complexity of processing signal. In this paper, we propose a new technique for analyzing ultrasonic pulse signal, in order to improve the measurement accuracy and simplify a remote sensing system of draught by ultrasonic waves. In this technique, pulse signal is translated into phase curve which is composed of the phase value defined in time domain. Then, the time interval between two signals different in waveform, is waveform, is analytically determined by calculating average time difference on phase curves. Also, analytical procedure can be carried out in real time with the successive five data sampled at T/4, for high speed digital processing with computer and A/D converter. This technique is useful for measuring draught under the influence of sea condition and for interfacing its data briefly to the integrated bridge system.

• Journal of Biosystems Engineering
• /
• 제36권1호
• /
• pp.48-57
• /
• 2011

The computer vision system was designed and constructed to measure the weight of a dairy cattle. Its development involved the functions of image capture, image preprocessing, image algorithm, and control integrated into one program. The experiments were conducted with the model dairy cattle and the real dairy cattle by two ways. First experiment with the model dairy cattle was conducted by using the indoor vision experimental system, which was built to measure the model dairy cattle in the laboratory. Second experiment with real dairy cattle was conducted by using the outdoor vision experimental system, which was built for measuring 229 heads of cows in the cattle facilities. This vision system proved to a reliable system by conducting their performance test with 15 heads of real cow in the cattle facilities. Indirect weight measuring with four methods were conducted by using the image processing system, which was the same system for measuring of body parameters. Error value of transform equation using chest girth was 30%. This error was seen as the cause of accumulated error by manually measurement. So it was not appropriate to estimate cow weight by using the transform equation, which was calculated from pixel values of the chest girth. Measurement of cow weight by multiple regression equation from top and side view images has relatively less error value, 5%. When cow weight was measured indirectly by image surface area from the pixel of top and side view images, maximum error value was 11.7%. When measured cow weight by image volume, maximum error weight was 57 kg. Generally, weight error was within 30 kg but maximum error 10.7%. Volume transform method, out of 4 measuring weight methods, was minimum error weight 21.8 kg.

• 센서학회지
• /
• 제20권4호
• /
• pp.243-248
• /
• 2011

The purpose of this study is to develop a sensing system to measure the capacitance of a pre-developed engine oil deterioration detection sensor integrated with an oil filter. To measure the capacitance of engine oil in the sensor, it is used the way measuring the electric charging time in a capacitor by impressing DC volt. This method has merits on cost and signal stability. The measured capacitance is compensated by comparison with the one measured by an impedance analyzer. Also, using the dielectric constant gained by an impedance analyzer, the calculating equation of the dielectric constant of engine oil related with the currently developed sensor is decided. Finally, the degradation degree of engine oil is estimated according to the change rate of dielectric constant between green oil and used oil. The newly developed personal controller is to control a series of the processes.

• 전자공학회논문지 IE
• /
• 제49권2호
• /
• pp.82-88
• /
• 2012

본 논문에서는 안드로이드 기반의 모바일 플랫폼을 이용한 통합형 유헬스케어 시스템 설계하여 개인의 건강관리 서비스를 위한 시스템을 제안하였다. 통합형 생체 계측 시스템은 심전도, 산소포화도, 혈압, 호흡, 체온 등 모듈을 통하여 생체 신호를 계측하고 신호처리된 생체 정보를 무선 통신모듈을 이용하여 안드로이드 기반의 모바일 플랫폼 게이트웨이로 전송한다. 전송된 생체 데이터는 모바일 시스템에서 건강상태를 감시하거나 유헬스케어 서버로 전송하도로 설계하였다. 생체신호 감시 시스템을 구현함으로서 측정되어진 생체 데이터를 모니터링하여 현재의 건강상태를 확인할 수 있었으며 보호자의 이동성을 보장할 수 있는 장점을 보였다. 이와 같은 시스템은 개인 건강관리 및 응급환자 감시 시스템을 위한 유헬스케어 시스템 발전에 도움이 되리라 본다.

• 디지털산업정보학회논문지
• /
• 제5권4호
• /
• pp.87-97
• /
• 2009

Internet network routing system is used to prevent spread and distribution of malicious data traffic. This study is based on analysis of diagnostic weakness structure in the network security domain. We propose an improved integrated multi-level protection domain for in the internal route of groupware. This paper's protection domain is designed to handle the malicious data traffic in the groupware and finally leads to lighten the load of data traffic and improve network security in the groupware. Infrastructure of protection domain is transformed into five-stage blocking domain from two or three-stage blocking. Filtering and protections are executed for the entire server at the gateway level and internet traffic route ensures differentiated protection by dividing into five-stage. Five-stage multi-level network security domain's malicious data traffic protection performance is better than former one. In this paper, we use a trust evaluation metric for measuring the security domain's performance and suggested algorithm.

• 방송공학회논문지
• /
• 제10권4호통권29호
• /
• pp.599-609
• /
• 2005

DTV 필드테스트를 위해서는 다양한 계측장비와 운용장비를 통한 매우 많은 측정항목의 측정이 필요하다. 따라서 한 지역을 측정하는데 많은 시간이 소요될 뿐 아니라 측정자의 숙련도에 따라 측정결과의 정확도와 신뢰도가 떨어질 수 있다. 또한, 매체에 따라서는 수 천 지점 이상의 측정을 하게 되는데 이들 측정결과에 대한 체계적인 관리가 절실하다 본 논문에서는 이러한 문제들을 해결하기 위해 다양한 계측장비와 운용장비를 체계적으로 관리하고, 측정절차를 일반화하며 측정결과 데이터를 데이터베이스화하여 측정결과를 용이하게 파악할 수 있는 통합 측정 시스템을 제안한다. 제안된 시스템은 DTV 뿐만 아니라 DMB, DAB 등의 다른 디지털 신호 측정에도 활용할 수 있으며, 실제로 KBS에서 실시한 DTV 필드테스트에 적용하여 기존의 수동측정 시스템보다 정확성과 시간의 효율성 면에서 우수함을 증명하였다.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권6호
• /
• pp.699-703
• /
• 1999

It is known that the LDC(Line-Drop Compensator) becomes to lose the function of proper voltage regulation for its load currents due to the real and reactive power generated by DGS(Dispersed Generation System), when DGS is introduced into the power distribution system of which the voltage is controlled by LDC. Therefore, in that case, it is very difficult to regulate the distribution line voltage properly by using LDC. One possible solution for this problem is the real-time voltage regulation method which is to optimally regulate the sending-end voltage in real-time by collecting the real-time load data of each load data of each load section between measuring points and by calculating the optimal seding-end voltage value from them. For this, we must know the real-time load data of each load section. In this paper, a modeling method of representing a load section on high voltage line with DGSs as an equivalent lumped load is proposed for gaining the real-time load data. In addition a method of locating the measuring points is proposed. Then, these proposed methods are evaluated through computer simulations.

• 원예과학기술지
• /
• 제16권1호
• /
• pp.25-26
• /
• 1998

본 연구는 정량펌프를 이용한 정확한 증산량 추정 시스템의 구축 및 측정된 증산량과 환경요인과의 관계를 분석하는 데 있다. 정량펌프에 의한 양액공급 및 증산량 추정 시스템은 매우 안정적인 특성을 나타냈으며, 증산량 추정을 위하여 재배 시스템에 설치한 정량펌프의 공급시간과 투입량과의 관계는 직선관계를 나타냈다. NFT 및 고형배지 시스템에서의 적산일사량과 증산량을 실측한 결과 증산량은 일사량에 직접적인 영향을 받고 있었으며, NFT는 상관계수 0.98. 고형배지는 상관계수 0.92의 높은 상관관계를 나타내었다. 따라서 정량펌프에 의한 증산량 추정은 양액급액 제어에 효율적인 방법이며, 이러한 방법을 사용하여 적산일사량에 의한 관수량 조절 및 비료투입량의 결정에 적용이 가능하다. 따라서, 측정된 적산일사량에 의하여 증산량 추정이 가능하기 때문에, 정량펌프에 의하여 필요 관수량을 정확한 공급할 수 있다.

• 한국태양에너지학회 논문집
• /
• 제29권1호
• /
• pp.1-10
• /
• 2009

This study was carried out to evaluate the Life Cycle Cost(LCC) of three types of RTPV(Building Integrated Photovoltaic) systems-Glass plus Granite. Crystalline BIPV and See through Amorphous BIPV-which were vertically installed to generate the same power output(76 kW level). Initial investment costs. cost. savings and maintenance costs had been predicted during the period of analysing the LCC of three types of BIPV(Building Integrated Photovoltaic) systems installed for the purpose of evaluating the LCC. In case of cost savings, it had been analyzed by measuring the amount of electric power generated, reduction in lighting load and heat & cooling loads through simulation. From this analysis, it was predicted that the See-through amorphous BIPV offering cost saving advantages demonstrated the economical efficiency similar to the Class plus Granite when it is backed by more than 20 years of durability.