• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.347-353
• /
• 2020

In this paper, the durability of an electromagnetic metamaterial absorber is verified in a temperature varying condition mimicking a maritime environment for the purpose of applying it to reduce the radar cross section of an integrated mast of the next-generation destroyer. To validate the durability, the reflectance of the electromagnetic metamaterial absorber was measured after storing it in a chamber that can control the temperature according to Procedure I of Method 501.7 included in MIL-STD-810H. Before and after the environmental test, both of the measured reflectances were retained less than -10 dB over the X band, that can guarantee the stealth functionality.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.5
• /
• pp.500-509
• /
• 2013

This study reports a numerical analysis of the internal flow characteristics of the integrated urea-SCR muffler system with the various geometries of the multi-perforated tube which is set up between the muffler inlet and in front of SCR catalysts. The multi-perforated tube is generally used to disperse uniformly the urea-water solution spray and to make better use of the SCR catalyst, resulting in the increased $NO_x$ reduction and decreased ammonia slip. The effects of the multi-perforated tube orifice area ratios on the velocity distributions in front of the SCR catalyst, which is ultimately quantified as the uniformity index, were investigated for the optimal muffler system design. The steady flow model was applied by using a general-purpose commercial software package. The air at the room temperature was used as a working fluid, instead of the exhaust gas and urea-water solution spray mixture. From the analysis results, it was clarified that the multi-perforated tube geometry sensitively affected to the formation of the bulk swirling motion inside the plenum chamber set in front of the SCR catalyst and to the uniformity index of the velocity distribution produced at the inlet of the catalyst.

• Clean Technology
• /
• v.18 no.4
• /
• pp.446-450
• /
• 2012

Strong alkaline electrolyzed water which is produced in cathode by electrolyzing the solution where electrolytes (NaCl, $K_2CO_3$ etc.) are added in diaphragm electrolytic cell, is eco-friendly and has cleaning effects. So, it is viewed as a substitution of chemical cleaner. In addition, strong alkaline electrolyzed water is being used by some Japanese automobile and precision parts manufacturing industries. When strong alkaline electrolyzed water is produced by using diaphragm electrolytic cell, it is necessarily produced at the anode side. Since strong acidic electrolyzed water produced is discarded when its utilization cannot be found, production efficiency of electrolyzed water is consequently decreased. Also, there is a weakness electrolytic efficiency is decreasing due to the pollution of diaphragm. In order to overcome this, non-diaphragm all-in-one electrolytic cell integrated with electrode reaction chamber and dilution chamber was applied. Strong alkaline electrolyzed water was produced for different composition of electrolytes, and their properties and characteristics were identified. In comparing the properties between strong alkaline electrolyzed water produced in diaphragm electrolytic cell and that produced in all-in-one electrolytic cell, the differences in ORP and chlorine concentration were found. In emulsification test to confirm surface-active capability, similar results were obtained and strong alkaline electrolyzed water produced in non-diaphragm all-in-one electrolytic cell was identified to be useable as a cleaner like strong alkaline electrolyzed water produced in diaphragm electrolytic cell. Strong alkaline electrolyzed water produced in non-diaphragm all-in-one electrolytic cell is thought to have sterilizing power because it has active chlorine which is different from strong alkaline electrolyzed water produced in diaphragm electrolytic cell.

• Journal of Distribution Science
• /
• v.13 no.11
• /
• pp.47-58
• /
• 2015

Purpose - This study aims to seek determinants of department store sales commission rates under consignment contracts based on transaction cost theory, the power-dependence view, and the resource-based view. A consignment contract is a unique contract where the retailer, over a given period, takes possession of goods owned by a supplier, promotes the sales of these goods, and receives a profit share from their sales. Under this contract, the supplier owns the goods until they are sold. In department stores in South Korea, over 70% of overall sales comes through consignment contracts. In other words, this is the most popular contract agreement between large retailers and vendors in South Korea. Consignment contracts yield high profits to department stores with minimal sales uncertainty, stock cost, and marketing investment. Many suppliers believe the consignment contract commission rates are too high. However, department stores disagree. They state that the commissions are not high as they generate new value for the suppliers by accumulating up-to-date merchandise and supporting various marketing programs on their behalf. Recently, consignment contracts have been critically examined and scrutinized by politicians, mass media, and the public of Korea. This study further intends to derive implications reflecting both buyer and seller perspectives as well as offer insights to policy makers in making appropriate decisions. Research design, data, and methodology - To verify the proposed research model and test hypotheses, the authors selected 164 suppliers, which currently have relationships with department stores. This study carefully investigated the reliability, content validity, convergent validity, and discriminant validity of the proposed model. The data were analyzed using SPSS 18.0 and AMOS structural equation modeling program Results - For the transaction cost theory and the power-dependence view, the results indicated that product diversity and demand volatility had a positive impact on the sales dependence on a department store. Dependence in turn had a positive effect on the sales commission under the consignment contract. Based on the resource-based view, the department store's marketing capability, the supplier's perception toward merchandising, and supporting activities could enhance the department store's channel leadership in the buyer-seller relationship. Subsequently, the channel leadership had a positive effect on the sales commission. However, product complexity had no relationship with department store dependence. Conclusions - This is the first empirical research that investigates the determinants of sales commissions under consignment contracts in the domestic retail industry. This study reveals several theoretical and practical implications for both marketing scholars and marketers. In terms of theoretical implication, this study integrated and enlarged certain theoretical background, such as transaction cost theory, the power-dependence view, and the resource-based view, to explain the determinants of sales commissions under consignment contracts that include sales revenue. From a business management viewpoint, this research offers useful insights for policy makers by applying two different perspectives, both the manufacturer and the retailer, in terms of the sales commission issue under a consignment contract.

• Journal of Ecology and Environment
• /
• v.32 no.2
• /
• pp.67-73
• /
• 2009

Soil $CO_2$ efflux can vary markedly in magnitude over both time and space, and understanding this variation is crucial for the correct measurement of $CO_2$ efflux in ecological studies. Although considerable research has quantified temporal variability in this flux, comparatively little effort has focused on its spatial variability. To account for spatial heterogeneity, we must be able to determine the number of sampling points required to adequately estimate soil $CO_2$ efflux in a target ecosystem. In this paper, we report the results of a study of the number of sampling points required for estimating soil $CO_2$ efflux using a closed-dynamic chamber in young and old Japanese cedar plantations in central Japan. The spatial heterogeneity in soil $CO_2$ efflux was significantly higher in the mature plantation than in the young stand. In the young plantation, 95% of samples of 9 randomly-chosen flux measurements from a population of 16 measurements made using 72-$cm^2$ chambers produced flux estimates within 20% of the full-population mean. In the mature plantation, 20 sampling points are required to achieve means within $\pm$ 20% of the full-population mean (15 measurements) for 95% of the sample dates. Variation in soil temperature and moisture could not explain the observed spatial variation in soil $CO_2$ efflux, even though both parameters are a good predictor of temporal variation in $CO_2$ efflux. Our results and those of previous studies suggest that, on average, approximately 46 sampling points are required to estimate the mean and variance of soil $CO_2$ flux in temperate and boreal forests to a precision of $\pm$ 10% at the 95% confidence level, and 12 points are required to achieve a precision of $\pm$ 20%.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.19 no.1
• /
• pp.11-34
• /
• 2015

Objectives This study intends to present the writing of standardized medical records based on Korean medicine on the basis of Geum-gwe-yo-ryak symptoms. Methods 1. Excluding the sentences unrelated to the Geum-gwe-yo-ryak symptoms, the symptoms in the rest of sentences were extracted. 2. Classifying the extracted symptoms as per the review of system, the similar symptoms were integrated. 3. Calculating the frequencies of each symptom, each strain rate was calculated. 4. The above results were compared with the results of existing similar study on Sang-han-ron("傷寒論") symptoms Results Conclusion 1. Resulting from the analysis on all sentences in Geum-gwe-yo-ryak, a total of 1486 different symptoms were extracted. 2. As results out of total, the symptom related to the temperature sensation accounted for 12.4%, that related to sweat did 3.8%, that related to thirst did 3.8%, that related to edema did 3.4%, that related to musculoskeletal system did 6.9%, that related to breathing did 8.6%, that related to chest and hypochondrium did 6.2%, that related to abdomen did 9.5%, that related to digestive system did 9.6%, that related to stool did 6.4%, that related to urination and urinary system did 5.7%, that related to mouth, eye, ear, nose, throat did 5.3%, that related to skin did 4.5%, that related to language, mind, sleep and emotion did 6.7%. 3. Compared with Sang-han-ron, Edema appear only in Geum-gwe-yo-ryak. Therefore, edema may be a characteristic symptoms of miscellaneous disease.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.9
• /
• pp.816-825
• /
• 2007

With a view to building up a program used in conceptual design of liquid rocket engine system, a preliminary performance-based code for an integrated engine system has been developed by incorporating sub-modular programs for each essential engine component. Modular descriptions for each component were formulated mathematically with essential parameters. In the whole iterative circuits for predicting engine performance, matching conditions of mass flow rate and pressure drop through each engine component have been considered. Mass balance calculations at each inter-component boundary are found smoothly converged. All the pressure drops through engine components as a function of mass flow rate are added up to provide turbo-pump outlet condition. In this paper, the flow chart for each iterative circuit and design methodologies are presented. Resultant predictions are validated with real engine data.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.313-313
• /
• 2017

Cold stress is one of the most influenced factors to rice yield. In order to identify genes related to cold stress in fertility stage, genome-wide association study (GWAS) was conducted. Cultivated 129 rice germplasm were moved in the growth chamber under the condition of $12^{\circ}C/RH70%$(12h day/12h night when the rice plant was grown in 10 DBH(days before heading). Also, rice plant as control was moved in the green house under condition of $28^{\circ}C/RH70%$(12h day/12h night). After 4 days the plants were moved in a greenhouse. The fertility of rice plant were monitored after the grain were fully grown. The most tolerant rice germplasm to cold stress were Cheongdo-Hwayang-12 and IR38 as 63.1 and 61.8 of fertility and the most recessive rice germplasm were Danyang38 and 8 rice germplasm as 0. As a result of GWAS with re-sequencing data and fertility after cold treatment germplasm using genome association and prediction integrated tool (GAPIT), 99 single-nucleotide polymorphisms (SNPs) were observed by applying a significance threshold of -logP>4.5 determined by QQ plot. With SNPs region, 14 candidate genes responded to cold stress in fertility stage were identified.

• Proceedings of the KIEE Conference
• /
• 1999.11d
• /
• pp.863-866
• /
• 1999

(Ba,Sr)$TiO_3$ thin films have attracted groat interest as new dielectric materials of capacitors for ultra-large-scale integrated dynamic random access memories (ULSI-DRAMs) such as 1 Gbit or 4 Gbit. In this study, inductively coupled $BCl_3/Cl_2$/Ar plasmas was used to etch (Ba,Sr)$TiO_3$ thin films. RF power/dc bias voltage = 600 W/-250 V and chamber pressure was 10 mTorr. The $Cl_2/(Cl_2+Ar)$ was fixed at 0.2, the (Ba,Sr)$TiO_3$ thin films were etched adding $BCl_3$. The highest (Ba,Sr)$TiO_3$ etch rate is 480$\AA/min$ at 10 % $BCl_3$ adding to $Cl_2$/Ar. The characteristics of the plasmas were estimated using optical emission spectroscopy (OES). The change of Cl, B radical density measured by OES as a function of $BCl_3$ percentage in $Cl_2$/Ar. The highest Cl radical density was shown at the addition of 10% $BCl_3$ to $Cl_2$/Ar. To study on the surface reaction of (Ba,Sr)$TiO_3$ thin films was investigated by XPS analysis. Ion enhancement etching is necessary to break Ba-O bond and to remove $BaCl_2$. There is a little chemical reaction between Sr and Cl, but Sr is removed by physical sputtering. There is a chemical reaction between Ti and Cl, and Tic14 is removed with ease. The cross-sectional of (Ba,Sr)$TiO_3$ thin film was investigated by scanning electron microscopy (SEM), the etch slope is about $65\;{\sim}\;70$.

• Journal of Soil and Groundwater Environment
• /
• v.28 no.5
• /
• pp.1-11
• /
• 2023

The phenomenon of sediment resuspension in rivers and lakes causes contaminants (heavy metals and nutrients) accumulated in the sediment to leach into the overlying water. As a result, it can lead to changes in toxic effects and eutrophication in the aquatic ecosystem. In this regard, it is important to quantitatively determine the amount of contaminants leached during sediment resuspension. In this study, methods for assessing the amount of released contaminants and the types of contaminants potentially released due to sediment resuspension were studied and summarized. Methods for assessing leaching can be divided into three groups based on the principle of causing resuspension: (i) the oscillating grid chamber method, (ii) the mechanical stirrer method, and (iii) the shaker method. It was confirmed that the types of contaminants that can potentially be released include heavy metals bound to sulfides, as well as exchangeable and labile forms of heavy metals and nutrients. To effectively manage stable aquatic ecosystems in the future, a simplified leaching test method is needed to assess in advance the risks (i.e., changes in toxic effects and eutrophication) that sediment resuspension may pose to aquatic ecosystems.