• 한국전자파학회논문지
• /
• 제23권4호
• /
• pp.507-514
• /
• 2012

본 논문에서는 함체 내부의 PCB에 있는 트레이스 파원에 의한 함체의 공진 특성 해석법을 제안하고 있다. 함체 내부의 전자계를 계산하기 위해 PCB 트레이스에 형성되는 전류 분포 및 PCB 유전체의 경계면에서 만족하는 경계면 전계 분포에 관한 연립 적분방정식을 유도하였으며, 연립 적분방정식의 해는 Galerkin의 모멘트 법으로 구하고 있다. 그 결과, 함체의 공진 특성은 실험 결과 및 HFSS 툴에 의한 시뮬레이션 결과와도 잘 일치하고 있으며, 함체의 공진 주파수는 PCB 트레이스의 위치에 의해 달라진다는 것을 확인하고 있다. 이론 해석의 타당성을 검증하기 위해 반사 계수의 이론치를 측정치와도 비교하고 있다.

• 지구물리와물리탐사
• /
• 제7권1호
• /
• pp.51-55
• /
• 2004

This paper presents a fast and stable imaging scheme using the localized nonlinear (LN) approximation of integral equation (IE) solutions for inverting electromagnetic data obtained in a crosswell survey. The medium is assumed to be cylindrically symmetric about a source borehole, and to maintain the symmetry a vertical magnetic dipole is used as a source. To find an optimum balance between data fitting and smoothness constraint, we introduce an automatic selection scheme for a Lagrange multiplier, which is sought at each iteration with a least misfit criterion. In this selection scheme, the IE algorithm is quite attractive for saving computing time because Green's functions, whose calculation is a most time-consuming part in IE methods, are repeatedly re-usable throughout the inversion process. The inversion scheme using the LN approximation has been tested to show its stability and efficiency, using both synthetic and field data. The inverted image derived from the field data, collected in a pilot experiment of water-flood monitoring in an oil field, is successfully compared with that derived by a 2.5-dimensional inversion scheme.

• Nuclear Engineering and Technology
• /
• 제30권4호
• /
• pp.342-352
• /
• 1998

A nuclear design feasibility of soluble boron free(SBF core for the medium-sized(600MWe) PWR was investigated. The result conformed that soluble boron free operation could be performed by using current PWR proven technologies. Westinghouse advanced reactor, AP-600 was chosen as a design prototype. Design modification was applied for the assembly design with burnable poison and control rod absorber material. In order to control excess reactivity, large amount of gadolinia integral burnable poison rods were used and B4C was used as a control rod absorber material. For control of bottom shift axial power shape due to high temperature feedback in SBF core, axial zoning of burnable poison was applied to the fuel assemblies design. The combination of enrichment and rod number zoning for burnable poison could make an excess reactivity swing flat within around 1% and these also led effective control on axial power offset and peak pin power, The safety assessment of the designed core was peformed by the calculation of MTC, FTC and shutdown margin. MTC in designed SBF core was greater around 6 times than one of Ulchin unit 3&4. Utilization of enriched BIO(up to 50w1o) in B4C shutdown control rods provided enough shutdown margin as well as subcriticality at cold refueling condition.

• Nuclear Engineering and Technology
• /
• 제45권2호
• /
• pp.179-190
• /
• 2013

A station blackout experiment called SBO-01 was performed at the ATLAS facility. From the SBO-01 test, the station blackout scenario can be characterized into two typical phases: A first phase characterized by decay heat removal through secondary safety valves until the SG dryouts, and a second phase characterized by an energy release through a blowdown of the primary system after the SG dryouts. During the second phase, some physical phenomena of the change over a pressurizer function, i.e., the pressurizer being full before the POSRV $1^{st}$ opening and then its function being taken by the RV, and the termination of normal natural circulation flow were identified. Finally, a core heatup occurred at a low core water level, although under a significant amount of PZR inventory, whose drainage seemed to be hindered owing to the pressurizer function by the RV. The transient of SBO-01 is well reproduced in the calculation using the MARS code.

• 한국광학회지
• /
• 제4권1호
• /
• pp.101-107
• /
• 1993

3준위 레이저 rate equation 및 overlap integral로부터 파장 1.48 ${\mu}m$에서 여기된 E$r^{3+}$ 첨가 광섬유 광증폭기를 위한 광섬유 매개 변수의 최적 조건을 계산하였다. 이 계산으로부터 Er3+ 첨가 광섬유 광섬유 광증폭기의 소신호 이득(small signal gain) 특성을 개구수 (N.A.), V값, 광섬유 길이, 차단 파장(cutoff wavelength) 등의 함수로 알아 보았으며 또한, 최대 소신호 이득을 갖기 위한 광섬유 매개 변수를 결정하였다.

• 설비공학논문집
• /
• 제19권1호
• /
• pp.68-76
• /
• 2007

As an alternative approach to evaluate the unit heating load for apartment houses, we newly developed and proposed unit building method. The new method, which calculates the heating load of an apartment building as a whole, conceptually corresponds to integral analysis of building heat loss, while the existing unit apartment method to differential analysis. Four typical building models of Korean-style apartment house and two dynamic load calculation programs were selected to validate the present method under realistically imposed conditions. Eight sets of unit heating load calculated respectively by unit building and unit apartment methods showed excellent agreements regardless of building model and simulation program. It is expected that the unit building method can take the place of the unit apartment method due to fewer modeling assumptions as well as less computational efforts. Additional calculations to investigate the effects of various parameters on unit heating load yield good consistencies with known facts, and re-confirm the validity.

• 한국전자파학회논문지
• /
• 제9권1호
• /
• pp.1-7
• /
• 1998

모노폴 안테나를 갖는 휴대폰의 근거리 전자계블 맥스웰 방정식의 적분형을 이용한 FDTD 수식으로부터 계산 하였다. 이 전자계 값을 기존의 맥스웰 방정식의 미분형인 FDTD 수식에 대입하여 頭部의 전자파 노출 부위에 따른 SAR 분포플 계산하였다. 頭部는 유전율과 도전율이 같은 각 부분을 5 mm 크기인 80,000 개의 정육면체 셀로 분할하였고 휴대폰의 입력 전력은 0.6 W 이며 동작 주파수는 833 MHz로 하였다. 안테나로부터 2cm 떨어진 거리에서 頭部모형내 유기되는 최대 SAR 값은 1.5 [W/kg] 이었으며 이 값은 IEEE 의 안전기준인 1.6 L [W /kg] 이하임을 알 수 있다.

• 한국기계연구소 소보
• /
• 통권13호
• /
• pp.143-161
• /
• 1984

The mass balancing of rotors is an integral part of the study practice of the rotor dynamics. Any machine with rotating components is considered to be rotating machine. The part of a rotating machine that rotates in normal operation is generally reffered to as a rotor. A rotor is flexible if it deforms when the machine is operating at any speed up to its maximum design speed. Otherwise, the rotor is rigid. The general Purpose of the study of rotor dynamics is to increase understanding of rotor vibration phenomena and thus provide a means for controlling or eliminating these vitrations. As the efficiency of rotating machinery has been increased through reduced weight and increased speed, which implies increasement of rotor flexibility, the control of rotor vibration has become essential. Thus, the study and practice of rotor dynamaics has taken on an increasingly important role in recent years. Therefore many workers have studied about this and introduced a few balancing methods of flexible rotor, which can be classified mainly in following four sorts, 1. Polar plotting methed 2. Modal balancing method 3. Influence coefficient method 4. Unified balancing approach In this paper practical theories of rotor dynamics related to flexible rotor balancing have been reviewed and confirmed the calculation results of flexible balancing of typical rotor, as an example, respectively

• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.62-66
• /
• 2016

Tumor suppressor protein p53 loses its function upon binding with the HDM2 protein, and inhibiting the p53-HDM2 interaction is critical to suppress tumor cell growth. Recently, the cyclized helix-loop-helix peptide (cHLH) mimicking the ${\alpha}-helix$ part of the p53 protein has been designed and found to exhibit high binding affinity with HDM2. Here, we report the structural and thermodynamic characteristics of the bound complex of the cHLH peptide with the HDM2 protein. We performed molecular dynamics simulations to investigate the structural features of the cHLH peptide as well as its complex with the HDM2. The binding free energy calculation based on the integral equation theory was also executed to quantify the binding affinity for the cHLH/HDM2 complex and to understand the factors contributing to the binding affinity. We found a variety of factors for the helix stability of the cHLH peptide as well as in the complexation with the HDM2, which may provide an insight into the development of anti-cancer drug designs.

• Nuclear Engineering and Technology
• /
• 제19권3호
• /
• pp.198-204
• /
• 1987

발전소 과도현상과 비냉각재 상실사고를 모의할 수 있는 가압경수로발전소 모의코드 MCSIM을 개발하였다. 원자로 냉각재계통은 에너지 방정식과 운동량 방정식을 분리 취급하면서 Drift Flux 2상 유동모델, 적분 운동량 방정식 등을 사용하여 모델링하였다. 증기발생기의 모사는 Pot Boiler 모델을 사용하였고, 2차계통을 위해서는 분리 취급된 정상상태 에너지 방정식과 운동량방정식을 핵출력 계산을 위해서는 점 동특성 방정식을 사용하였다. 현재의 코드성능을 시험하기 위해 완전 냉각재 유동상실사고와 제어봉 집합체 인출 사고를 계산하여 그 결과를 원자력 5/6호기 최종 안전 보고서의 결과와 비교하였다.