• Journal of Satellite, Information and Communications
• /
• v.11 no.3
• /
• pp.100-103
• /
• 2016

This Study is focused on hedonic model study for retargeting advertising Based air inteface using useful information. many research related to the existing Internet of things, relatively not many study for effective advertising model based air inteface. So, this study is designed more information, fun, interactive advertising model based air inteface. therefore, result of this study show that implication to produce advertising based air inteface provides a practical guide.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1998.11a
• /
• pp.153-153
• /
• 1998

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1737-1738
• /
• 2007

An intelligent remote controller for 3-D TV interface exploits an artificial system of human visual attention for an easy interaction.

• Journal of computational fluids engineering
• /
• v.8 no.3
• /
• pp.41-49
• /
• 2003

The spatial accuracy becomes first-order when second-order conservation schemes including the non-conservative interpolation in general Chimera method are used. To ensure the solution accuracy, the discontinuities must be located away from the overlapped regions, and the length of overlapped region also must be proportional to the grid spacing. In this paper, a proposed method, cut-paste algorithm, is used to satisfy above constraints. The cut-paste algorithm can generate the optimal mesh inteface region automatically, To validate the spatial and temporal accuracy due to the non-conservative interpolation, inviscid and viscous problems are tested.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.729-734
• /
• 2000

This paper proposes virtual-magnetic system by a force-reflecting interface to drive a ultrasonic motors(USMs) To approach virtual magnet in graphic the 6 dDOF force-reflecting interfaces provides force feedback to users as if I is magnetic-force, So users can feel real magnet Effectively to display the magnetic-force we need the interface with specific characteristics such as low inertia almost zero friction and very high stiffness As an actuator for the interface the USMs have many good advantage satisfied these conditions over conventional servo motors. To estimate capability of this virtual-magnetic system we did an experiment of magnetism based on coulomb's law when Coulmb's low apply this experiment it is vey conformable to real magnet

• 한국HCI학회:학술대회논문집
• /
• 2007.02b
• /
• pp.387-394
• /
• 2007

사용자-제품 간의 인터랙션 환경의 변화로 인해 사용자 행태 정보의 특성을 체계적으로 분석하기 위한 많은 연구가 진행 되고 있으며, 사용자 행태 연구의 접근 가능성 보다는 행태 정보를 UI 디자인 과정에 어떻게 적용할 것인지에 대한 연구가 더욱 중요해 지고 있다. 이에 본 연구에서는 미래 제품 개발 환경에서 효율적인 UI디자인을 위하여 사용자의 실 생활에서 수집된 사용자 행태 정보를 UI 디자인 설계 과정에 효과적으로 적용할 수 있는 모델링 방법을 제안하였다. 이를 위해 사용자 행태 정보가 갖고 있는 단계별 구조의 특성을 정의하고, 행태 정보의 구조 분석을 통해 미래 제품 개발 환경에서 제품 사용 단계별 적용 가능한UI 고려 요소 및 UI 해결 방안의 도출 과정을 가시화 시켜 주기 위한 UI 모델링 방법을 제안하였다. 사례 연구로 현재 현관문에서 발생하는 사용자 행태 정보에 UI 모델링을 적용하여 미래 환경에서 제공 가능한 GATE System의 UI 고려 요소 및 UI 해결 방안을 추출하여 적용 가능성을 제시하였다.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2000.11a
• /
• pp.241-245
• /
• 2000

In this paper, the results of the direct shear interface friction test is introduced to understand interface friction between geosynthetic materials that are required for analyzing slope stability of the liner system of waste landfills. Tensile stresses that occur in a liner system due to differential settlement with waste load are estimated using FLAC. It was shown that HDPE/geocomposite inteface friction angle is 11.9$^{\circ}$, HDPE/wastes is 12.0$^{\circ}$ and geotextile/wastes is 28.0$^{\circ}$. Tensile stress due to settlement in a foundation of landfill is well within the limits of tensile strength regulated by waste treatment law.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.200-200
• /
• 2003

Polycrystalline Si(polysilicon) TFTs have opened a way for the next generation of display devices, due to their higher mobility of charge carriers relative to a-Si TFTs. The polysilicon W applications extend from the current Liquid Crystal Displays to the next generation Organic Light Emitting Diodes (OLED) displays. In particular, the OLED devices require a stricter control of properties of gate oxide layer, polysilicon layer, and their interface. The polysilicon layer is generally obtained by annealing thin film a-Si layer using techniques such as solid phase crystallization and excimer laser annealing. Typically laser-crystallized Si films have grain sizes of less than 1 micron, and their electrical/dielectric properties are strongly affected by the presence of grain boundaries. Impedance spectroscopy allows the frequency-dependent measurement of impedance and can be applied to inteface-controlled materials, resolving the respective contributions of grain boundaries, interfaces, and/or surface. Impedance spectroscopy was applied to laser-annealed Si thin films, using the electrodes which are designed specially for thin films. In order to understand the effect of grain size on physical properties, the amorphous Si was exposed to different laser energy densities, thereby varying the grain size of the resulting films. The microstructural characterization was carried out to accompany the electrical/dielectric properties obtained using the impedance spectroscopy, The correlation will be made between Si grain size and the corresponding electrical/dielectric properties. The ramifications will be discussed in conjunction with active-matrix thin film transistors for Active Matrix OLED.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.2
• /
• pp.171-181
• /
• 1988

In this study, a packet voice/data terminal(PVDT) that services both voice and data in the packet-switched network is implemented. The software structure of the PVDT is designed according to the OSI 7 layer architecture. The discrimination of voice and data is made in the link layer. Voice packets have priority over data packets in order to minimize the transmission delay, and are serviced by a simple protocol so that the overhead arising form the retransmission of packets may be minimized. The hardware structure of the PVDT is divided into five modules; a master control module, a speech proessing module, a speech activity detection module, a telephone interface module, and an input/output interface module. In addition to the hardware implementation, the optimal reconstruction delay of voice packets to reduce the influence of delay variance is analyzed.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.05a
• /
• pp.157-160
• /
• 2004

본 논문은 미국 차세대 디지털 케이블 방송 표준 규격인 오픈케이블($OpenCable^{TM}$)의 수신제한 모듈인 CableCard의 Physical Layer를 SystemC의 TLM(Transaction Level Modeling)과 RTL(Register-Transfer Level) 모델링 기법으로 설계하였다. 본 논문에서 설계한 CableCard의 Physical Layer는 PCMCIA Interface, Command Inteface 그리고 MPEG-2 TS Interface 로 구성된다. CableCard가 전원이 인가될 때, 카드 초기화를 위하여 동작하는 PCMCIA 인터페이스는 16 비트 PC 카드 SRAM 타입으로 2MByte Memory와 100ns access time으로 동작할 수 있게 설계하였다. PCMCIA 카드 초기화 동작이 완료된 후, CableCard의 기능을 수행하기 위하여 두 개의 논리적 인터페이스가 정의되는데 하나는 MPEG-2 TS 인터페이스이고, 다른 하나는 호스트(셋톱박스)와 모듈 사이의 명령어들을 전달하는 명령어 인터페이스(Command Interface)이다. 명령어 인터페이스(Command Interface)는 셋톱박스의 CPU와 통신하기 위한 1KByte의 Data Channel과 OOB(Out-Of-Band) 통신을 위한 4KByte의 Extended Channel 로 구성되고, 최대 20Mbits/s까지 동작한다. 그리고 MPEG-2 TS는 100Mbits/s까지 동작을 수행할 수 있게 설계하였다. 설계한 코드를 실행한 후, Cadence사의 SimVision을 통해서 타이밍 시뮬레이션을 검증하였다.