• Journal of Digital Convergence
• /
• v.11 no.11
• /
• pp.191-196
• /
• 2013

The proportion of small and medium sized enterprises based on the number of corporations in China is 99%, the number of employees is 80%, and the proportion of GDP is 60%. These facts show that small and medium sized enterprises have an very significant effect on the economic growth of China. However, most of the researches conducted so far have studied large corporations, thus, there are relatively insufficient researches on the determinant of the capital structure of small and medium sized enterprises. Therefore, the purpose of this paper is to confirm the factors that determine the capital structure of small and medium sized enterprises in China. To achieve this purpose, we performed multiple regression method to 45 small and medium sized manufacturing enterprises listed on the Shenzhen Stock Exchange of China. Results of this study are as follows. First, the growth appeared to have a significant positive effect to the debt ratio in 1% significance level. Second, the profitability appeared to have a significant negative effect to debt ratio in 1% significance level. Third, the firm size appeared to have no effect on the debt ratio. Fourth, the secured value and tax shield effect by non-debt appeared to have a weak positive effect on the debt ratio, however these variables showed statistical insignificant.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.6
• /
• pp.824-834
• /
• 1993

In cellular mobile communication systems, if the size of a cell is decreasing for economic utilization of frequency resources, frequent handovers may be requested because the time a mobile stays in a cell is decreasing. In general the measured parameters to decide handover including RSSI, BER, and the distance between mobile station and base station, are usually incorrect and handover decision using single parameter insufficient. Therefore, the better handover algorithm should take over the problems of this uncertain measurements, and make the decision more robust and flexible by the consideration of all those decision parameters at the same time. We propose a novel handover algorithm based the multicriteria decision making, in which those parameters are participated in the decision process using aggregation function in fuzzy set theory. As a simulation results, the overall decision making is more reliable and flexible than the conventional method using only one parameter, RSSI in terms of call force ratio, and handover request ratio.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.6
• /
• pp.1167-1173
• /
• 2017

As the society increasingly embraces the high - tech digital information age, the field of image processing becomes progressively more branched out and becoming an imperative field. However, image data is deteriorated due to various causes during transmission and salt and pepper noise is typical. Typical methods for removing salt and pepper noise include CWMF, SWMF, and A-TMF. However, existing methods are somewhat insufficient in their ability to remove noise in salt and pepper noise environments. Therefore, in this paper, after it is determined whether noise removal is needed, the following measures were taken. If the center pixel was non-noise, the original pixel was preserved, If it was noise, we proposed a two - dimensional spline interpolation method and a median filter depending on the noise density of the local mask. For the purpose of objective judgment, we compared the results with that of existing methods and used PSNR (peak signal to noise ratio) as a judgment criterion.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.7
• /
• pp.428-432
• /
• 2015

Sintering and microwave dielectric properties of $Zn_{2-2x}Si_{1+x}O_4$ (x=0~0.10) ceramics were investigated. The secondary phase of ZnO was observed in the specimen for x=0 whereas $SiO_2$ was detected in that for x=0.05. The composition of $Zn_2SiO_4$ might be close to x=0.02, i.e., $Zn_{1.96}Si_{1.02}O_4$; the ratio of Zn/Si is 1.922. The insufficient grain growth was observed in the specimen of x=0. For the specimens of $x{\geq}0.05$, the grain growth sufficiently occurred through the liquid phase sintering. The value of quality factor of all specimens was dependent on the x value, i.e., the ratio of Zn/Si, whereas that of dielectric constant was independent. Relative density, dielectric constant, and quality factor ($Q{\times}f$) of the specimen for x=0.05, i.e., $Zn_{1.9}Si_{1.05}O_4$, sintered at $1,400^{\circ}C$ were 96.5%, 6.43, and 115,166 GHz, respectively.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.18 no.2
• /
• pp.69-75
• /
• 2009

Daba ecorace of Antheraea mylitta Drury (Lepidoptera: Saturniidae), the semi domesticated Indian tropical tasar silkworm being reared outdoor; the egg and silk yields are dependent of genotype environment interaction. The insufficient maintenance and multiplication of its P4 seed stock need a coherent as well as scientific strategy to safeguard breed potential, being commercially applied ecorace. The sort-out lines of P4 stock studied over five generations highlighting on commercial trait up gradation suits for a tropical crop season, revealed enhanced performance. The line with high pupal parents (T2) shown improved fecundity (12.9%) and the line with high shell parents (T3) recorded higher shell weight (40.0%) and silk ratio (24.1%). While, the line of high pupal female and high shell male (T4) reveal enhancement in fecundity (9.0%), egg hatching (14.1%), shell weight (50.0%), silk ratio (35.2%) and absolute silk yield (52.0%) indicating the need and role of varied basic seed stock lines. The approach could improve economically vital egg fecundity and cocoon shell weights besides balancing them in same line for commercial operation. The progressive show of lines (T1 to T4) along successive generations (G1 to G5), in spite of passing through seed crop (Jul-Aug) and commercial crop (Sep-Nov) seasons emphasize their compatibility. The study infers that the strategic plan of combining preferred parental phenotypes, methodical selection for desired commercial trait(s) through generations with best possible genotype environment interaction has enriched P4 stock with elevation in needy trait(s) besides assuring choice of suitable lines for seasons and regions and timely replenishment of basic seed of Daba ecorace.

• Tribology and Lubricants
• /
• v.35 no.6
• /
• pp.376-381
• /
• 2019

Surface texturing is widely applied to reduce friction and improve the reliability of machine elements. Despite extensive theoretical studies to date, most research has been limited to parallel thrust bearings, mechanical face seals, piston rings, etc. However, most sliding bearings have a convergent film shape in the sliding direction and the hydrodynamic pressure is mainly generated by the wedge action. The results of surface texturing on inclined slider bearings are largely insufficient. This paper is the first part of a recent study focusing on the effect of the groove position on the lubrication performances of inclined slider bearings. We model a slider bearing with one rectangular groove on a fixed pad and analyze the continuity and Navier-Stokes equations using a commercial computational fluid dynamics (CFD) code, FLUENT. The results show that the film convergence ratio and the groove position have a significant influence on the pressure and velocity distributions. There are groove positions to maximize the supporting load with the film convergence ratio and the groove reduces the frictional force acting on the slider. Therefore, the proper groove position not only improves the load-carrying capacity of the slider bearings but also reduces its frictional loss. The present results apply to various surface-textured sliding bearings and can lead to further studies.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.2 no.2 s.5
• /
• pp.105-113
• /
• 2002

Steel-Concrete composite girders have been used since early in the 1920's due to their advantages, which are lower weight, increasement of stiffness, slenderness, long span. However, in designing short to continuous composite bridges, negative moment occurs in mid-support and creates problems such as cracks in the concrete slab. Therefore, partially composite bridges are considered. In this time, slab-anchor is used in these. If the stiffness of shear connectors is insufficient, slip would happen at the contact surface. Partial interaction is the case that takes account of slips. In this paper, the evaluation of initial shear stiffness of slab-anchor in composite bridges is obtained from Push-Out specimen. Also, finite element analyses which uses the initial shear stiffness of slab-anchor got the experiment are carried out on simple composite girder and continuous composite girder. Futhermore, the ratio of composite according to various shear stiffness are investigated and the classification according to the ratio of composite is proposed.

• Ocean and Polar Research
• /
• v.26 no.4
• /
• pp.679-684
• /
• 2004

To determine if Antarctic krill employ body shrinkage as one of its overwintering mechanisms in the field, Euphauia superba and Euphausia crystallorophias were collected during fall and winter in and around Marguerite Bay through US Southern Ocean GLOBEC field programs during fall and winter 2001 and 2002. The relationships between the body length and weight of both krill species were exponentially correlated with no significant differences between the two species (p>0.05). The ratio between eye diameter and body length of individual krill was examined in an expectation that it could be used as an indicator of the body shrinkage as previously suggested by Shin and Nicol (2002). These ratios were significantly different between the two krill species. Especially, E . crystallorophias had bigger eyes than E. superba. In both krill species, eye diameters were highly correlated with body lengths (regression coefficients ${\geq}0.70$). For E. crystallorophias, no significant differences of the ratio of eye diameter/body length were detected between fall and winter. Even though the ratios for E. superba were seasonally varied, it was not clear whether body shrinkage was an actual and critical overwintering mechanism for the krill population found in this study area. These results suggest that some individuals of E. superba might experience the body shrinkage during a part of their liff, but this morphological index alone (eye diameter/body length) may be insufficient to unambiguously separate the shrunk krill from the non-shrunk ones in the field-collected animals.

• Journal of Korean Society on Water Environment
• /
• v.23 no.5
• /
• pp.642-649
• /
• 2007

The effectiveness of add-on tertiary treatment processes for the polishing of the effluent of a biological nutrient removal (BNR) system from a modified $A^2/O$ process has been examined under the field condition with pilot-scale plants. The add-on treatment processes of 1) combined biofilm anoxic reactor and sand filtration, and 2) two-stage denitrification filter had been operated with various operating conditions. The experimental results indicated that two-stage denitrification filter could produced a better polished tertiary effluent. Filtration rate of $150m^3/m^2{\cdot}d$ for the 2-stage denitrifying filter could decrease the nitrate removal probably due to shorter detention time that caused insufficient reaction for denitrification. Two stage denitrification filter operated with M/N ratio of 3.0 and filtration rate of $100m^3/m^2{\cdot}d$ produced the tertiary effluent with nitrate and SS concentraitons of 2.8 mg/L and 2.3 mg/L, respectively. When the operating temperature reduced $30^{\circ}C$ to $18^{\circ}C$, $NO_3{^-}-N$ removal efficiency decreased from 73% to 68%.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.7
• /
• pp.25-35
• /
• 2008

In domestic cases, the standard support pattern of 2-lanes road tunnels is presented because construction experience and high degree various data was abundant. But, it is not desirable to apply standard for 2-Arch tunnels that the precedent and measuring data is insufficient existing support pattern blasting plan and interpretation of separate way concerning specific terrain and rock quality. In this study, behavior according to load distribution ratio and Unsymmetrical Pressure about standard support pattern which is applied in design and construction of 2-arch tunnels was analysed and the examination of blasting vibration has influence on the center wall is conducted as a consequence reasonableness of support whether or not with presumed support pressure and ground reaction curve method. In result appropriateness of standard support pattern, support quantity is proper but considers specific terrain and rock quality condition when design and construction of further step 2-arch tunnel standard support pattern must be decided by considering terrains, soil properties and construction condition of the objective tunnel.