• Korean journal of food and cookery science
• /
• v.30 no.3
• /
• pp.340-350
• /
• 2014

The physicochemical and sensory properties of bean sprouts with different namulkong cultivars were examined. The five namulkong cultivars included were as follows : Nokchaekong, Dawonkong, Seonamkong, Orialtae, and Pungsannamulkong with light green, black, yellow, dark green, and yellow seed coats, respectively. The bean sprouts were cultivated in a lab and were used for analyses. The instrumental textural hardness and lipoxygenase activity of the heads were higher than those of the stems in both fresh and boiled bean sprouts. The 3 minutes of boiling caused a decrease in the hardness and lipoxygenase activity of the heads and the stems. The chlorophyll a and b contents in the heads were higher than those in the stems, and they decreased with boiling. The fresh bean sprouts with Dawonkong, Seonamkong and Pungsannamulkong showed higher acceptability than those with Nokchaekong and Orialtae. The higher acceptability was observed in the boiled and flavored bean sprouts with Seonamkong and Pungsannamulkong.

• Transactions of the Korean hydrogen and new energy society
• /
• v.27 no.6
• /
• pp.693-701
• /
• 2016

Steam gasification of low rank coals is possible at relatively low temperature and low pressure, and thus shows higher efficiency compared to high rank coals. In this study, the gasification reactivity of four different Indonesian low rank coals (Samhwa, Eco, Roto, Kideco-L) was evaluated in $T=700-800^{\circ}C$. The low rank coals containing $53.8{\pm}3.4$ wt% volatile matter in proximate analysis and $71.6{\pm}1.2$ wt% carbon in ultimate analysis showed comparable gasification reactivity. In addition, $K_2CO_3$ catalyst rapidly accelerated the reaction rate at $700^{\circ}C$, and all of the coals were converted over 90% within 1 hour. The XRD analysis showed no significant difference in carbonization between the coals, and the FT-IR spectrum showed similar functional groups except for differences due to moisture and minerals. TGA results in pyrolysis ($N_2$) and $CO_2$ gasification atmosphere showed very similar behavior up to $800^{\circ}C$ regardless of the coal species, which is consistent with the steam gasification results. This confirms that the indirect evaluation of the reactivity can be made by the above instrumental analyses.

• Physical Therapy Korea
• /
• v.14 no.3
• /
• pp.64-71
• /
• 2007

The purposes of this study were to determine correlations between the Berg Balance Test (BBS), Timed -UP & Go Test, Fugl Meyer-L/E, Balance, Sensory (FM-L/E, B, S), Motor Assessment Scale-Gait (MAS-G), Comfortable maximal Gait Speed (C MGS), and the Modified Barthel Index (MBI). The subjects were 40 stroke patients of the Korea National Rehabilitation Center in Seoul. Main outcome measures were Balance control (BBS, FM-B), Gait (TUG, C MGS, MAS-G), ADL (MBI) and Motor Function of Lower Extremities (FM-L/E, S). The data were analyzed using Pearson product correlation. FM scales between other clinical and instrumental indexes and multiple stepwise regression analyses were performed to identify prognostic factors for Balance, Gait and ADL Motor Function of Lower Extremity inclinations. The results of this study were as follows: The BBS, FM-L/E, balance, sensory and MBI showed positive correlation relations, but TUG and C MGS showed negative correlations. The sensory factor of the FM-scale showed the strongest variance in predicting BBS. However the FM-balance showed the strongest variance in predicting TUG, MAS-G and C MGS. The use of both quantitative and qualitative scales was shown to be a good measuring instrument for the classification of the general clinical performance of the patients.

• Microbiology and Biotechnology Letters
• /
• v.23 no.3
• /
• pp.329-336
• /
• 1995

For the development of new antitumor antibiotics produced by microorganisms, Streptomyces sp. YBE-316 was isolated from soil. The productivity of the antitumor antibiotic from Streptomyces sp. YBE-316 gradually increased after 60 hours, and was maximum after 100 hours after inoculation in growth medium (2.0% sucrose, 1.0% soybean meal, 0.1% K$_{2}$HPO$_{4}$, pH 7.0) at 30$\circ$C, 150 rpm, 5 NL/min by 30 l jar fermentor. This antitumor antibiotic was present only in mycelium, and stable in pH 5.0-10.0 for 20 minutes at 100$\circ$C. Antitumor and antibiotic activities were maintained at neutral pH, and heat stability was low. This antitumor antibiotic was soluble in methanol and ethanol, and insoluble in water, ethyl acetate, chloroform, and n-hexane. This antitumor antibiotic was sequentially purified by acetone extraction from mycelium, butanol extraction, and silica gel column chromatography. Antitumor activity was low against most tested cell lines, but antibiotic activity was high and low against yeasts and bacteria, respectivelv. The visualization test showed that this antitumor antibiotic had higher hydroxyl, ketone, amino, carboxyl groups, and sugar(s) in its structure. Instrumental analyses showed that this antitumor antibiotic was a pentaene in polyene class antibiotics. In pentaene class antibiotics, this was considered as an eurocidin or capacidin type antibiotics. The molecular weight of this antitumor antibiotic was higher than 683.0 daltons, and this antitumor antibiotic might be glycosylated by other sugar(s), instead of mycosamine or perosamine, an amino sugar.

• Journal of the Korean institute of surface engineering
• /
• v.38 no.3
• /
• pp.106-111
• /
• 2005

Ternary Ti-B-C coatings were synthesized on WC-Co and Si wafers substrates by a PECVD technique using a gaseous mixture of $TiCl_4,\;BCl_3,\;CH_4,\;Ar,\;and\; H_2$. The effects of deposition variables such as substrate temperature, gas ratio, $R_x=[BCl_3/(CH_4+BCl_3)]$ on the microstructure and mechanical properties of Ti-B-C coatings were investigated. From our instrumental analyses, the synthesized Ti-B-C coatings was confirmed to be composites consisting of nanocrystallites TiC, quasi-amorphous TiB2, and amorphous carbon at low boron content, on the contrary, nanocrystallites $TiB_2$, quasi-amorphous TiC, and amorphous carbon at relatively high boron content. The microhardness of the Ti-B-C coatings increased from $\~23 GPa$ of TiC to $\~38 GPa$ of $Ti_{0.33}B_{0.55}C_{0.11}$ coatings with increasing the boron content. The $Ti_{0.33}B_{0.55}C_{0.11}$ coatings showed lower average friction coefficient of 0.45, in addition, it showed relatively better wear behavior compared to other binary coatings of $TiB_2$ and TiC. The microstruture and microhardness value of Ti-B-C coatings were largely depend on the deposition temperature.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.4
• /
• pp.78-85
• /
• 1998

The antifungal activity of methanol extracts against dermatophytes was the highest at root-bark methanol extract, and the highest inhibitory effect was revealed in petroleum ether fraction of root-bark methanol extract. Compound I and compound II with significant antifungal activity were isolated from the fractions by silica gel column chromatography. As a result of the instrumental analyses, compound I and compound II were already known alkaloids. Compound I was identified as 4-methoxyfuro[2,3-6]quinoline (dictamnine ; $C_{12}H_9NO_2$) and compound II was identified as 4-methoxy-lmethyl-2(1H)-quinolinone ($C_{11}H_{11}NO_2$). The MIC of compound I against T. mentagrophytes and T. rubrum was $40{\mu}g/m\ell$ and the MIC of compound II against the same fungi was $800{\mu}g/m\ell$.

• Geosciences Journal
• /
• v.22 no.6
• /
• pp.871-880
• /
• 2018

During and shortly after the 2017 Pohang Earthquake ($M_w$ 5.4), sand blows were observed around the epicenter for the first time since the beginning of instrumental seismic recording in South Korea. We carried out field surveys plus satellite and drone imagery analyses, resulting in observation of approximately 600 sand blows on Quaternary sediment cover in this area. Most were observed within 3 km of the epicenter, with the farthest being 15 km away. In order to investigate the ground's susceptibility to liquefaction, we conducted a trench study of a 30 m-long sand blow in a rice field 1 km from the earthquake epicenter. The physical characteristics of the liquified sediments (grain size, impermeable barriers, saturation, and low overburden pressure) closely matched the optimum ground conditions for liquefaction. Additionally, we found a series of soft sediment deformation structures (SSDSs) within the trench walls, such as load structures and water-escaped structures. The latter were vertically connected to sand blows on the surface, reflecting seismogenic liquefaction involving subsurface deformation during sand blow formation. This genetic linkage suggests that SSDS research would be useful for identifying prehistoric damage-inducing earthquakes ($M_w$ > 5.0) in South Korea because SSDSs have a lower formation threshold and higher preservational potential than geomorphic markers formed by surface ruptures. Thus, future combined studies of Quaternary surface faults and SSDSs are required to provide reliable paleoseismological information in Korea.

• Journal of the Korean institute of surface engineering
• /
• v.54 no.5
• /
• pp.230-237
• /
• 2021

In this study, the influence of silicon contents on the microstructure, mechanical and tribological properties of Ti-Al-Si-N coatings were systematically investigated for application of cutting tools. The composition of the Ti-Al-Si-N coatings were controlled by different combinations of TiAl₂ and Ti₄Si composite target powers using an arc ion plating technique in a reactive gas mixture of high purity Ar and N₂ during depositions. Ti-Al-Si-N films were nanocomposite consisting of nanosized (Ti,Al,Si)N crystallites embedded in an amorphous Si₃N₄/SiO₂ matrix. The instrumental analyses revealed that the synthesized Ti-Al-Si-N film with Si content of 5.63 at.% was a nanocomposites consisting of nano-sized crystallites (5-7 nm in dia.) and a three dimensional thin layer of amorphous Si₃N₄ phase. The hardness of the Ti-Al-Si-N coatings also exhibited the maximum hardness value of about 47 GPa at a silicon content of ~5.63 at.% due to the microstructural change to a nanocomposite as well as the solid-solution hardening. The coating has a low friction coefficient of 0.55 at room temperature against an Inconel alloy ball. These excellent mechanical and tribological properties of the Ti-Al-Si-N coatings could help to improve the performance of machining and cutting tool applications.

• Journal of Family Relations
• /
• v.21 no.4
• /
• pp.3-25
• /
• 2017

Objectives: We examined which socioeconomic and intergenerational characteristics were associated with the level of intention to marry among Korean men and women in young adulthood. Method: Data came from 351 men and 391 women who were 25-34 years old, had never been married, and had at least one living parent. We conducted multiple regression analyses by gender after controlling for age and current romantic relationship. Results: Among the socioeconomic characteristics, more years of education was linked to both men's and women's higher levels of intention to marry. For women, having a secure, full-time job was related to greater intention to marry. For men, the higher their subjective socioeconomic status, the greater their intention to marry. Among intergenerational characteristics, both men's and women's positive attitudes toward supporting elderly parents were related to a higher level of intention to marry. For men, the frequency of providing instrumental support for their parents was negatively associated with the men's intention to marry. For women, higher levels of agreement with parents' responsibility to support their adult children as well as greater affection for their parents were positively related to greater intention to marry. Conclusions: The findings suggest that young adults' socioeconomic resources and the family context are important predictors of young adults' marital intentions. The results also reveal gender differences in the factors associated with young adults' marital intentions.

• Analytical Science and Technology
• /
• v.35 no.6
• /
• pp.229-236
• /
• 2022

Lipidomic analyses of transient breast milk are far more limited than those of other dairy products. As a preliminary analysis of breast milk lipidomes, analytical methods for polar and nonpolar lipids from transient breast milk were developed, and detailed fatty acid profiles were determined in this study. The newly developed methods include solvent fractionation of phospholipids and acyl glycerol, one-pot derivatization to FAMEs and pyridylcarbinol esters, and instrumental analysis, including GC-FID and GC-MS. The results indicate that breast milk contains 16 major common fatty acids with 8-22 carbons. Additionally, 29 minor fatty acids were identified, including odd-numbered fatty acids and branched analogues with 11-23 carbons. Their detailed concentrations in different fractions were measured using the internal standard method. In addition to ordinary fatty acids, breast milk contains several branched fatty acids, including iso/anteiso acids with 15-18 carbons. Structural studies have been performed on selected minor fatty acids via chemical synthesis.