• 한국산림과학회지
• /
• 제100권2호
• /
• pp.246-255
• /
• 2011

본 연구는 2010년 9월 2일 강한 바람으로 우리나라 중부 지방에 영향을 미친 제7호 태풍 곤파스로 인해 피해를 입은 홍릉수목원 내 풍도목을 대상으로 풍도목의 특징, 임내 외 풍향 및 풍속의 특징을 구명하고자 실시하였다. 풍도목은 피해 유형에 따라 바람에 쓰러진 나무, 기울어진 나무, 수간이 부러진 나무 등 크게 세 가지로 구분하여 조사하였다. 바람이 불기 시작한 9월 2일 04시부터 바람이 완전히 멎은 12시까지의 풍속을 분석한 결과, 임내 평균풍속과 순간최대풍속은 각각 1.4 m/s와 3.5 m/s 이었으며, 06시 10분 임내 평균풍속과 순간최대풍속이 각각 3.4 m/s와 8.7 m/s로 최고치를 기록하였다. 곤파스의 피해를 받은 2010년 9월 2일과 강풍주의보가 발효되었던 과거 5일(2009년 2월 13일, 2월 20일, 4월 21일, 10월 16일, 2010년 3월 20일)의 평균풍속 차이와 파동을 비교 분석한 결과, 풍도목 발생 원인은 바람의 세기보다는 단위시간당 바람파동횟수와 관련이 깊은 것으로 사료된다. 풍향 분석 결과 임내 평균풍향은 방위각 $112.5^{\circ}{\sim}180^{\circ}$(ESE-SE-SSE-S)와 $247.5^{\circ}$(WSW) 방향에서 불어 들어왔으며, 임내 외 순간 최대풍향 모두 방위각 $157.5^{\circ}$(SSE) 방향에서 강하게 불어 들어왔다. 풍도목의 도복 방향과 위치를 분석한 결과 84.0%의 풍도목이 방위각 $270^{\circ}{\sim}22.5^{\circ}$(W-WNW-NW-NNW-N-NNE) 방향으로 쓰러졌으며, 97.3%의 풍도목이 완경사지(경사 $15^{\circ}$ 미만)와 경사지(경사 $15^{\circ}{\sim}20^{\circ}$)에서 발생하였다. 풍도목 중 침엽수가 45.3%를 차지했고, 활엽수가 54.7%를 차지하였으나, 임상별로 보면 풍도목은 활엽수림보다 침엽수림과 혼효림에서 주로 발생한 것으로 나타났다.

• Journal of Electrical Engineering and Technology
• /
• 제1권2호
• /
• pp.153-160
• /
• 2006

This paper presents a new compensating system, which consists of a shunt active filter and passive components for mitigating voltage and current disturbances arising from an Electric Arc Furnace (EAF). A novel control strategy is presented for the shunt active filter. An extended method based on instantaneous power theory in a rotating reference frame is developed for extraction of compensating signals. Since voltages at the point of common coupling contain low frequency interharmonics, conventional methods cannot be used for dc voltage regulation. Therefore, a new method is introduced for this purpose. The passive components limit the fast variations of load currents and mitigate voltage notching at the Point of Common Coupling (PCC). A three-phase electric arc furnace model is used to show power quality improvement through reactive power and harmonic compensation by a shunt active filter using the proposed control method. The system performance is investigated by simulation, which shows improvement in power quality indices such as flicker severity index.

• Structural Engineering and Mechanics
• /
• 제50권3호
• /
• pp.287-304
• /
• 2014

A computer based iterative numerical procedure has been developed to analyse reinforced high strength concrete columns subjected to horizontal wave loads and eccentric vertical load by taking the material, geometrical and wave load non-linearity into account. The behaviour of the column has been assumed, to be represented by Moment-Thrust-Curvature relationship of the column cross-section. The formulated computer program predicts horizontal load versus deflection behaviour of a column up to failure. The developed numerical model has been applied to analyse several column specimens of various slenderness, structural properties and axial load ratios, tested by other researchers. The predicted values are having a better agreement with experimental results. A simplified user friendly hydrodynamic load model has been developed based on Morison equation supplemented with a wave slap term to predict the high frequency non-linear impulsive hydrodynamic loads arising from steep waves, known as ringing loads. A computer program has been formulated based on the model to obtain the wave loads and non-dimensional wave load coefficients for all discretised nodes, along the length of column from instantaneous free water surface to bottom of the column at mud level. The columns of same size and material properties but having different slenderness ratio are analysed by the developed numerical procedure for the simulated wave loads under various vertical thrust. This paper discusses the results obtained in detail and effect of slenderness in resisting wave loads under various vertical thrust.

• Journal of Positioning, Navigation, and Timing
• /
• 제5권4호
• /
• pp.221-233
• /
• 2016

This paper deals with performance assessment of the kinematic network-based GPS positioning technique with a view to using it for ellipsoidally referenced bathymetric surveys. To this end, two field trials were carried out on a land vehicle and a surveying vessel. Single-frequency GPS data acquired from these tests were processed by an in-house software which equips the network modeling algorithm with instantaneous ambiguity resolution procedure. The results reveals that ambiguity success rate based on the network model is mostly higher than 99.0%, which is superior to that of the single-baseline model. In addition, achievable accuracy of the technique was accessed at ${\pm}1.6cm$ and 2.7 cm with 95% confidence level in horizontal and vertical component respectively. From bathymetric survey at the West Nakdong River in Busan, Korea, 3-D coordinates of 2,011 points on its bed were computed by using GPS-derived coordinates, attitude, measured depth and geoid undulation. Note that their vertical coordinates are aligned to the geoid, the so-called orthometric height which is widely adopted in river engineering. Bathymetry was constructed by interpolating the coordinate set, and some discussion on its benefit was given at the end.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권4호
• /
• pp.457-463
• /
• 2012

Cascaded H-bridge multilevel inverters shows a useful circuit configuration to increase the number of output voltage levels to obtain high quality output voltage. By applying the concept of the power of three to dc voltage sources, it can increase the number of output voltage levels effectively. To realize this concept, two approaches may be considered. One is to use independent dc voltage sources pre-scaled in the power of three, and the other is to use instantaneous dc voltage sources generated from a cascaded transformer, which has the secondary turn-ratios scaled in the power of three in sequence. A common feature in both approaches is to use the concept of the power of three for dc voltage sources, and a point of difference is whether it adopts a low frequency transformer or not, and where the transformer is located. According to the difference, application areas are limited and show different characteristics on THD of output voltages. We compare and analyze both approaches for their circuit configurations, voltage level generating method, THD characteristics of output voltage, efficiency, application areas, limitations, and other characteristics by experiments using 500 [W] prototypes when they generate a 27-level output voltage.

• 설비공학논문집
• /
• 제29권6호
• /
• pp.306-315
• /
• 2017

This study introduces a software for real-time assessment of combustion stability for utility gas turbines. The software was written with LabView, and implemented the time-domain kurtosis as a parameter to proactively access the instantaneous combustion stability during operation of the industrial gas turbine. The simple time-domain assessment algorithm incorporated in the software is advantageous over conventional frequency-domain signal processing of dynamic pressure signal since it reduces the computational cost, thereby making the algorithm more appropriate for real-time monitoring of combustion stability. Benchmark data obtained from a model gas turbine combustor were used for the reproducibility test of the software. The assessment obtained from the software agreed well with previously published results, indicating that incorporation of the software could enhance the performance of systems monitoring the combustion stability for gas turbines during power generation.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권2호
• /
• pp.259-266
• /
• 2009

An experimental study was conducted to investigate the effects of forcing amplitude on the flow structure near the nozzle exit of forced jet diffusion flames. The jet was excited up to the blowout occurrence by a considerable large amplitude with a periodic velocity fluctuation at the tube resonating frequency. In the attached flame regime, we disclosed the very interesting result newly that adding of a moderate forcing amplitude caused the jet flame to become longer in spite of being forced. Particular attention is focused on the turnabout mechanism of vortex roll-up around the elongated flame, which has not been reported previously, and on the inner coherent structure of the forced jet in the attached flame regime. From the velocity and flow visualization results, it was ascertained that the surrounding air due to the occurrence of negative velocity parts was suck into the fuel nozzle. To aid in understanding the rotating phenomenon of coherent structure, we present a schematic diagram of the turnabout mechanism of vortex roll-up. The mechanism of vortex turnabout phenomenon can be easily understood by considering the positive and negative velocity amplitudes about the instantaneous velocity of the forcing flow, as shown in this diagram.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.603-605
• /
• 1996

The SLIM used in the conveyance system has been generally developed the controller based on the slip frequency control and the VVVF method to obtain the quick response for the position control signal. This paper deals with the trust control of the SLIM by vector control with Bang-Bang condition. Also, the control system is composed of the PI controller for soft start of the SLIM and the q-axis current controller for correction in phase with Space Vector for reducing the harmonic pulsation in low speed. The processing for vector control and robust dynamic breaking control is carried out by MC80196KC micro processor and IGBT module. The proposed scheme is verified through the computer simulation and experiments for the 10KW SLIM.

• 한국통신학회논문지
• /
• 제17권3호
• /
• pp.268-276
• /
• 1992

본 논문에서는 전파감측(감시 및 측정)이나 유니버셜 복조기의 개발을 위한 기초 연구로써, 미지의 디지털 변조 신호 식별에 대하여 논의한다. 제안한 식별 방법은 시간 영역의 파라미터를 이용하는 방안으로 먼저 포락선, 순시 주파수, 차위상 정보를 기본특징으로 추출한다. 추출된 기본특징은 식별을 위해 2개의 2차원 비선형 식별 공간으로 사상되며 입력 신호의 식별은 1차 선형식별함수를 이용해 이루어진다. 본 논문에서 제안한 방법의 타당성을 검증하기 위하여 가우스성 잡음 환경하에서 ASK-2, ASK-4, BPSK, QPSK, 8PSK, FSK, QAM 신호를 대상으로 특징추출과 식별과정을 모의실험한다.

• 전기학회논문지
• /
• 제62권10호
• /
• pp.1487-1493
• /
• 2013

A new simple control method for active power filter, which can realize the complete compensation of harmonics is proposed. In the proposed scheme, a model-based digital current control strategy is presented. The proposed control system is designed and implemented in a form referred to as internal model control structure. This method provides a convenient way for parameterizing the controller in term of the nominal system model, including time-delays. As a result, the resulting controller parameters are directly set based on the power circuit parameters, which make tuning of the controllers straightforward task. In the proposed control algorithm, overshoots and oscillations due to the computation time delay is prevented by explicit incorporating of the delay in the controller transfer function. In addition, a new compensating current reference generator employing resonance model implemented by a DSP(Digital Signal Processor) is introduced. Resonance model has an infinite gain at resonant frequency, and it exhibits a band-pass filter. Consequently, the difference between the instantaneous load current and the output of this model is the current reference signal for the harmonic compensation.