• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.535-536
• /
• 2011

This paper studies the validity about a joint operation of neutral wire and overhead grounding wire in combined distribution systems. The overhead grounding wire and neutral wire are currently installed separately and grounded by common. However there is no any ineffectiveness or electrical problem in case of the proposed system, such system can be operated at real distribution system. Therefore this paper describes the suitability of a joint operation through lightning surge analysis on combined distribution systems and analyzes the optimal position of lightning arrester on joint operation of neutral wire and overhead grounding wire. Lightning surge analysis is carried out by EMTP/ATPDraw to obtain the overvoltage of overhead line and underground cable in various conditions such as location and current types of lightning stroke. Over voltage gained by the analysis show that the insulation strength of the joint operation case is not stable compare with the current operation case.

• The Journal of Korea Robotics Society
• /
• v.10 no.1
• /
• pp.1-8
• /
• 2015

This paper proposes a study for accurate surface localization system using DWT(Discrete Wavelet Transform) and GPS/INS fusion algorithm. Because the propagation in the underwater is not passed by characteristics of the medium unlike the ground, the sonar system like DVL is used instead of GPS. But since these systems are installed on the seafloor and operated, a long time is required for installation and navigation systems are limited outside of the range area. And it is difficult to estimate position in a three-dimensional considering the depth in actual marine environment. In this paper, before the development of underwater localization system, precisely estimated position system is proposed in a two-dimensional by developing surface localization system using removing noise and disturbance with DWT and relatively inexpensive GPS and INS sensor.

• The Journal of the Korea Contents Association
• /
• v.17 no.12
• /
• pp.138-147
• /
• 2017

In this paper, we introduce smart multi-sensor and environment monitoring system for managing growth and development of the agricultural produces. This system is able to help to collect the sensor information about the growing environment and to monitor in wired and wireless environments. Existing systems installed each kinds of sensor to gather information. In this case, installation cost was incurred about each sensor and the position of sensor set up manually. Therefore, this paper designed and implemented smart multi-sensor that simplify sensors in order to minimize the cost for installing each sensor. In addition, this system is able to monitor position and data information of smart multi-sensor using RFID communication

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.448-451
• /
• 2004

MSC (Multi-Spectral Camera) system is an electro-optical camera system which is being developed to be installed on KOMPSAT-2 satellite. High resolution image data from MSC system will be transmitted to the ground-station through x-band antenna called APS (Antenna Pointing System). APS is a directional antenna which will point to the receiving antenna at ground station while the satellite is passing over it. The APS needs to be controlled accurately to provide the reliable communication with big RF link margin. The APS is controlled by ATS (Antenna Tracking Software) which is included in the MSC software. ATS uses the closed loop control algorithm which will use TPF (Tracking Parameter File) as an input for antenna position, and will use two resolve readings from APS as a feedback. ATS has been developed and verified using APS QM (Qualification Model) and all the control parameters for ATS have been tested and verified. Various kinds of maximum, nominal and realistic dynamics for the APS movement have been simulated and verified. In this paper, closed loop servo control algorithm and obtained APS position error from the verification test with APS QM will be presented in detail

• 한국태양에너지학회:학술대회논문집
• /
• 2008.11a
• /
• pp.57-62
• /
• 2008

Building Integrated PV(BIPV) is one of the best fascinating PV application technologies. To apply PV module in building, various factors should be reflected such as installation position, shading, temperature, and so on. Especially the installation condition should be considered, for the generation performance of PV module is changed or the generation loss is appeared according to installation position, method, and etc. This study investigates variation of electrical characteristics of a PV module according to the change of irradiance and temperature. From this experimental study, we confirmed that the irradiance, the temperature variation and the generation performance of a PV module were appeared differently according seasonal variation. Actually the PV module installed in building facade showed high-generation performance in winter.

• International Journal of Fluid Machinery and Systems
• /
• v.1 no.1
• /
• pp.57-63
• /
• 2008

To optimize the stationary components in the multistage centrifugal pump, the effects of the return vane profile on the performances of the multistage centrifugal pump were investigated experimentally, taking account of the inlet flow conditions for the next stage impeller. The return vane, whose trailing edge is set at the outer wall position of the annular channel downstream of the vane and which discharges the swirl-less flow, gives better pump performances. By equipping such return vane with the swirl stop set from the trailing edge to the main shaft position, the unstable head characteristics can be also suppressed successfully at the lower discharge. Taking the pump performances and the flow conditions into account, the impeller blade was modified so as to get the shock-free condition where the incidence angle is zero at the inlet.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.99-102
• /
• 2002

The present study describes a numerical analysis for simulation of the sloshing of flows with free-surface which contained in a rectangular tank The SOLA-VOF (Volume of fluid) method uses a fixed mesh for calculating the motion of flow and the free-surface. This Eulerian approach enables the VOF method to use only a small amount of computer memory for simulating sloshing problems with complicated free-surface contours. The VOF function, representing the volume fraction of a cell occupied by the fluid, is calculated for each cells, which gives the locating of the free-surface filling any some fraction of cells with fluid. Using SOLA-VOF method, the study describes visualization about simulation of the sloshing of flows and damping effect by baffle. Translation and pitching motion of the forms have been investigated The time-dependent changes of free-surface height are used for visualization subject to several conditions such as fluid height horizontal acceleration, sinusoidal motion, and viscosity. The free-surface heights were used for comparing wall-force, which is caused by sloshing of flows. Baffle was Installed to reduce the force on the wall by sloshing of flows. Damping effects was extensively expressed under the conditions such as baffle shape and position.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.327-328
• /
• 2006

In generally, under the influence of over-pressure drop, serious problems such as cavitation, choked flow, flashing and vibration has been coming around the tilting disk check valve. A PIV experiment to examine the cause of energy loss has been performed and the improvement configuration of valve seat based on this visualization results is proposed. In the visualization results, flows in the piping system became instability under the influence of the shape of boss. This unstable flows induces sudden pressure drop in the piping system. So, we change the configuration of boss as a streamlined design to be stabilized the flows. A pressure measurement has been performed to know that the influence of the configuration change. In result, the rate of pressure loss reduction is about 22% at the position of No. 2 and 24.2% at the position of No. 6 in comparison with pre-improved shape.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.12
• /
• pp.3627-3631
• /
• 2014

In this study we examined two ester-containing cross-links, hex-2-enyl acetate and hex-2-enyl propionate, as new cross-linking systems for helix stabilization of short peptides. We demonstrated that these hexenyl ester cross-links can be readily installed via a ruthenium-mediated ring-closing metathesis reaction of L-aspartic acid 4-allyl ester or L-glutamic acid 5-allyl ester at position i and (S)-2-(4'-pentenyl)alanine at position i+4 using second generation Hoveyda-Grubbs catalyst at $60^{\circ}C$. Between these two cross-links, we found that the hex-2-enyl propionate significantly stabilizes the ${\alpha}$-helical conformations of short model peptides. The helix-stabilizing effects of the hex-2-enyl propionate tether appear to be as powerful as Verdine's i,i+4 all-hydrocarbon stapling system, which is one of the most widely used and the most potent helix-stabilizing cross-linking systems. Furthermore, the hex-2-enyl propionate bridge is reasonably robust against non-enzymatic hydrolytic cleavage at a physiological pH. While extended studies for probing its chemical scopes and biological applications are needed, we believe that this new helix-stabilizing system could serve as a useful chemical tool for understanding protein folding and designing conformationally-constrained peptide drugs.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.10
• /
• pp.1310-1317
• /
• 2014

In our daily life, the need of energy increases day by day. However, the amount of natural resources on the earth is limited and thus gaining renewable energy as an energy resource is one of the important and urgent problems. Solar energy is one of the most popular available energy sources that can be converted into electricity by using solar panels. In order for solar panels to produce maximal output power, the incident angle of the sunlight needs to be persistently perpendicular to the solar panel. By the way, most of the solar panels are installed at fixed position and direction. Therefore, as the sun's position changes, it is impossible to produce maximal output power inevitably. To improve this problem, in this paper, a sun tracking system using two degree-of-freedom (DOF) active sensor array is proposed so that the solar panel may always direct sunlight perpendicularly. And also a series of software, such as a search mode and a holding mode, which can control the developed sun tracking system is developed. Several experiments using the implemented sun tracking system are executed and the effectiveness of the system is verified from the experimental results.