• 터널과지하공간
• /
• 제31권6호
• /
• pp.428-439
• /
• 2021

뿜칠 멤브레인은 폴리머로 구성된 재료로서 지보 또는 차수 목적으로 기존 방수포와 같은 재료를 대체 할 수 있을 것으로 기대되는 뿜어 붙이는 방식의 재료이다. 이전의 해외 연구에서 기존 시멘트계 지보 재료들에 추가로 뿜칠 멤브레인을 시공할 경우 숏크리트와 같은 지보재의 시공 두께를 줄일 수 있을 것으로 기대하고 있으나 국내에서는 아직까지 실험이나 분석 결과가 많이 보고되고 있지 못하다. 본 연구에서는 고성능 숏크리트에 뿜칠 멤브레인을 바깥면에 타설하여 3점 휨시험을 수행하고 고성능 숏크리트와 뿜칠 멤브레인이 시공된 경우를 비교하여 분석하였다. 실내 표준 시험과 실대형 휨시험을 통해 산정된 값을 서로 비교한 결과 휨강도 측면에서는 큰 차이를 보이지 않았으나 휨인성 부분에서 차이를 보이는 것으로 나타났다.

• 한국습지학회지
• /
• 제25권3호
• /
• pp.176-183
• /
• 2023

본 연구는 자유수면 아래 원통형 와류발생부에서 와류 수차 성능에 대한 블레이드 수가 미치는 영향을 이해하는 것이다. 동일한 블레이드 형상을 사용하여 상대 와류 수심비(y/h_v) 0.065 ~ 0.417 범위에 설치된 2개, 3개, 4개, 5개 및 6개의 블레이드로 마이크로 와류 수차의 성능을 실험하였다. 연구 결과로서 블레이드 수가 증가함에 따라 회전수, 전압, 전류 및 출력이 유속 0.7 m/s 이하일 때 상대 와류 수심비 0.065와 0.111 지점에서 증가한다. 5개 블레이드 수차의 평균 출력은 다른 블레이드 수보다 높게 나타난다. 오리피스 근처에 설치된 직경 130 mm인 4개의 블레이드 수차의 성능이 와류발생부에서 동일한 수의 직경 220 mm인 블레이드 수차보다 높다.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2004년도 학술논문집
• /
• pp.194-198
• /
• 2004

The thermo-hydro-mechanical (T-H-M) process is one of major issues in the performance assessment of a high level waste (HLW) repository. An engineering-scale test was planned and its experimental set-up has being installed, to validate the T-H-M behavior in the buffer of a reference disposal system. The experimental set-up consists of 4 major components: the confining cylinder with its hydration water tank, the bentonite block, the heating system, and the sensors and instruments. The monitoring and data acquisition system is employed to control the heater to maintain the temperature of $95^{\circ}C$ at the interface of the heater and bentonite blocks and to collect signals from sensors and instruments installed in the bentonite blocks.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 춘계학술발표회논문집(1)
• /
• pp.213-218
• /
• 1997

The RTD Bypass Loops at Kori Unit 3&4 will be removed and a new system will be designed and will be installed to replace it. The replacement system provides equal or better performance and eliminates some Persistent problems. The Resistance Temperature Detector (RTD) bypass line is eliminated to reduce the radiation exposure to operators and workers. After the elimination, the resistance temperature detectors are installed in scoop of the reactor coolant piping to detect a representative temperature. This study includes safety evaluation, RTD response time Analysis, Uncertainty Analysis, LOCA evaluation and Structural Analysis.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 추계학술대회 논문집
• /
• pp.117-118
• /
• 2014

This paper presents a new smart power module for 100[kVA] inverter. In the inverter, the three smart modules are used and those are installed at the each pole of the inverter. Each module receives the switching functions from the inverter main controller, and generates duty ratio for IGBTs' switching of the pole. For the reliable operation of the inverter, CAN communication is used for transferring the switching functions form the main controller to the modules. Experiments verify the performance of the smart power module installed in 100[KVA] inverter.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1679-1683
• /
• 2005

This paper suggests the new type of a joint torque sensor which is attached at each joint of a manipulator for making compliance. Previous six axis force/torque sensors are high cost and installed end-effector of the manipulator. However, torque on links of previous an end-effector cannot be measured. We design a joint torque sensor that can be fully integrated with an actuator in order to measure applying torque of the manipulator. The sensor system is designed through the structural analysis. The proposed joint torque sensors are installed to the 6 DOF manipulator of a mobile robot for hazardous works and we implemented experiments of measuring applied torque to the manipulator. By the experiment, we proved that the proposed low-cost joint torque sensor gives acceptable performance when we control a manipulator.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.157-160
• /
• 2006

A turbo-expander is developed for the regeneration in the expansion process. The turbo-expander operates in the partial admission and supersonic flow, and an axial-type single stage turbine is applied to the turbo-expander. Its outer diameter is 82mm and the operating gas is R134a. A 15kW reciprocating compressor is applied in this experiment and the turbo-expander is installed in the expansion process instead of the commonly using expansion valve. Two supersonic nozzles are applied for the expansion process. The high speed of R 134a after passing the supersonic nozzles gives the impulse force to the turbo-expander and some powers are generated on this process. A generator is installed at the end of the turbo-expander shaft. The generating output power from the turbo-expander is controlled by the power controller. Pressures and temperatures are measured on the lines for the performance investigation. More than 600W/(kg/sec) are generated in this experiment.

• 한국소음진동공학회논문집
• /
• 제14권11호
• /
• pp.1083-1090
• /
• 2004

Two noise reduction systems are proposed in order to overcome the geometric restriction of the reactive muffler such as an expansion chamber. First, membrane is installed as a part of a duct wall and an air cavity is covered outside membrane. Second, membrane is installed inside a duct, which gives no volume change of the duct. Structural-acoustic coupling between membrane and fluid inside the cavity and duct causes rapid impedance mismatching and thereby reflected wave. Theoretical prediction is conducted by using modal expansion approach. The results are compared with the experimental results, which show better noise reduction performance than an expansion chamber.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.527-532
• /
• 2010

In this study, vertical and horizontal accelerometers were installed at the both side of car body and tachometer was installed on the bogie, for the purpose of stability analysis of Korail Airport Express Train during driving. By applying the developed algorithm, the peak-to-peaks of horizontal and vertical acceleration which were matched with location by tachometer were found and compared with the threshold values. The threshold values per velocities which were presented in the "Metro Train Performance Criteria" were applied here. The validity of the developed algorithm was shown by comparing the site investigation and the measured values at frost heave locations.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.474-479
• /
• 2004

Two noise reduction systems are proposed in order to overcome the geometric restriction of the reactive muffler such as an expansion chamber. First, membrane is installed as a part of a duct wall and an air cavity is covered outside membrane. Second, membrane is installed inside a duct, which gives no volume change of the duct. Structural-acoustic coupling between membrane and fluid inside the cavity and duct causes rapid impedance mismatching and thereby reflected wave. Theoretical prediction is conducted by using modal expansion approach. The results are compared with the experimental results, which show better noise reduction performance than an expansion chamber.