• 제목/요약/키워드: Installations Condition

검색결과 39건 처리시간 0.126초

GIS 기반의 SWMM 모형을 이용한 하수도시스템 선정에 따른 도시하천 수질개선효과의 정량적 분석 (Analysis of the Effects of Sewer System on Urban Stream using SWMM based on GIS)

  • 장주형;박해식;박청길
    • 한국물환경학회지
    • /
    • 제22권6호
    • /
    • pp.982-990
    • /
    • 2006
  • Generally CSOs (Combined Sewer Overflows) are regarded as one of the most serious nonpoint pollution source in the urban watershed, Particularly, the water quality of the Oncheon stream is seriously affected by CSOs because the capacity of interception sewer system connected to the Suyoung wastewater treatment plant is too small to intercept most storm water discharges. The objective of this study is to evaluate the effect of nonpoint source on an urban stream with regards to combined sewer system and separate sewer system using GIS (Geographic Information System) and SWMM (Storm Water Management Model), and to provide an insight for the management of urban stream water quality. In order to consider the effect of CSOs on the receiving water quality, the flow divider element in SWMM was applied. The model calibration and verification were performed by the measured data of quantity and quality on the Oncheon stream. The quantity data acquired from the Suyoung wastewater treatment plant were also used for this procedure. In case of separate sewer system, the modeling results showed the increased tendency in streamflow compared with the combined system in dry weather, In addition, the water quality is remarkably improved in rainfall events at the separate condition. The results imply that the construction of separate sewer system should be taken into first consideration to restore the quality and quantity of water in urban streams.

진동 차단벽재료 및 타설심도가 방진효과에 미치는 영향 - 점가진 원심모형실험을 중심으로 - (Influence of Materials and Embedded Depth of Isolation Barrier on Ground Vibration - With Point Loaded Centrifugal Tests -)

  • 이강일;김태훈
    • 한국지반공학회논문집
    • /
    • 제20권6호
    • /
    • pp.41-49
    • /
    • 2004
  • 진동전달을 차단하는 공법으로는 방진구나 방진벽공법 등이 있으며 최근에는 다양한 재료를 사용한 차단벽공법 등이 제안되고 현장 시공도 다수 행해지고 있으며 또한 저감효과가 확인되고 있다. 그러나 이들 공법은 가진원의 특성, 지반조건, 차단벽의 매개변수 등이 복잡하여 합리적이고 정량적인 진동저감 평가방법이 아직 확립되어 있지 않다. 본 연구는 이러한 관점에서 지표면에 점가진이 전달될 경우 진동차단벽공법을 원심모형실험을 통하여 재현하고자 하였다. 이를 위해 차단벽재의 강성 및 차단벽재의 타설 심도를 변화시키는 실험을 실사하고 이들의 차이가 방진효과에 미치는 영향에 대하여 검토하였다. 본 연구결과 원심모형 실험장치를 환경진동 문제에 적용하고 파동의 지반내 전달현상 및 메카니즘을 파악하고 본 연구에서 개발한 충격 재하장치의 적용성을 확인했다.

수용가 전기설비 관리자의 PL인식 및 설비사고사례에 관한 실태연구 (The Study on the Actual Condition about Facility Accident Case and PL Recognition of the Safety Manager in Electric Installation for Private Use)

  • 김영석;송길목;정종욱;정진수;김선구;이준
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2008년도 춘계학술대회 논문집
    • /
    • pp.309-312
    • /
    • 2008
  • In this paper, we investigated electric safety manager's PL recognition and accident occurrence of electric power facilities(power cable, transformer, circuit breaker) in electric installation for private use. The target of questionnaire survey is 450 electric installations for private use, 154 responded the questionnaire among these and it occupied 35.8%. Most of receiving voltage were 22.900kV. The questionnaire survey says that 58% of electric safety manager knew well about PL contents and 42% of them did not recognize about PL contents, About the PL application of electrical facility accidents, 82.4% of them must applied PL law, 5.8% of them did not need the PL law. Reason of PL application occupied 64% for stability of electrical facility and product, 19% for prevention of same accident. The accident of transformer occupied most and the power cable accident were much next. The questionnaire survey results, electric safety managers are interested in PL content. thev expected necessity of PL application about electrical accident strongly.

  • PDF

청정에너지 회수용 유증기/매연 포집모듈에 관한 연구 (A Study on the Oil-mist/Smoke Collecting Module for the Pure Energy Recycling)

  • 김명수;오꾸라 시게노부;함경춘
    • 한국태양에너지학회:학술대회논문집
    • /
    • 한국태양에너지학회 2009년도 추계학술발표대회 논문집
    • /
    • pp.279-284
    • /
    • 2009
  • Traditionally, so-called "industrial waste gases", such ad exhaust from boilers at industrial installations and a large quantity of soot discharged from power station, before their release into the atmosphere, have been on occasion subjected to an air cleaning process to remove fine particles that may pollute the atmosphere (such as mist and dust containing various powdery or oily substances and moisture from industrial waste gases). The release of industrial waste gases containing these particles directly into the atmosphere poses a serious threat to the earth environment; and recovery of these noxious substances is required by law in some countries and local governments. in urban areas, air pollution from automobile exhaust and others creates a serious condition. Some homes are equipped with and use indoor air purifiers. In many of the kitchens of restaurants, smoke generated during cooking and otherwise contaminated air are cleansed by air purifiers before being released outside or recycled inside. For the dust collecting devices to recover the fine particles contained in contaminated air, the cause for air pollution and how to purify air, many types based on various principles are known. Specifically, classified based on theories of particle collection, filtration, gravity, inertia, centrifugation, electricity, and cleaning types are cited as available processes. Among them, an appropriate type is selected according to the size or type of fine particles to be collected and conditions for installation. For the efficiency of dust collection, a filtration system (by using bag filters and others) and electric system are particularly outstanding and are therefore used widely in various areas of industry. In this research, rotary type high performance oil mist and smoke collecting system with self auto cleaning device equipped with the cleaning fluid spraying section is investigated.

  • PDF

회분식 초음파 전처리를 이용한 하수슬러지의 분해에 관한 연구 (A Study on the Disintegration of Sewage Sludge using Batch Ultrasonic Pretreatment)

  • 고현웅;정병길;정연화;김형석;장성호;성낙창
    • 유기물자원화
    • /
    • 제12권4호
    • /
    • pp.121-129
    • /
    • 2004
  • 혐기성 소화공정은 하수슬러지의 안정화와 VS 감소 및 바이오가스 생산의 장점으로 인해 가장 일반적인 하수슬러지 처리공정이다. 혐기성 소화공정에서 하수슬러지의 분해속도가 느리기 때문에 가수분해 속도를 향상시키기 위한 많은 전처리 방법들이 연구되어져 왔다. 본 연구에서는 주로 초음파의 음향강도와 조사시간에 따른 하수슬러지의 초음파 분해에 대한 영향을 검토하였다. 본 연구에서는 주로 초음파의 음향강도와 조사시간에 따른 하수슬러지의 초음파 분해에 대한 영향을 검토하였다. 실험은 초음파의 발진주파수를 40kHz로 하여 초음파 조사밀도를 각각 33W/L, 70W/L, 88W/L 및 139W/L로 변화시켜 조사하였고, 초음파 조사시간을 각각 10분, 20분, 25분, 30분, 그리고 40분으로 변화시켜 잉여슬러지와 혼합슬러지의 분해 정도를 평가하였다. 잉여슬러지와 혼합슬러지 분해에 대한 $SCOD_{Cr}/TCOD_{Cr}$비의 변화 비교에서 초음파 발진주파수가 40kHz일 때 초음파의 음향밀도가 증가할수록 그리고 조사시간이 길어질수록 $SCOD_{Cr}/TCOD_{Cr}$의 비가 증가함을 보였다. 초음파 전처리 후에 잉여슬러지와 혼합슬러지의 pH는 발진주파수 40kHz에서 음향밀도가 증가할수록 그리고 조사시간이 길어질수록 감소하였다.

  • PDF

Pseudomonas sp. KDi19를 이용한 액체배지내에서 경유의 생물학적 분해 (Biodegradation of Diesel with Pseudomonas sp, KDi19 in Liquid Medium)

  • 윤민우;정정화;장순웅;공성호;이종렬;강동효;이상섭
    • 대한환경공학회지
    • /
    • 제27권12호
    • /
    • pp.1285-1291
    • /
    • 2005
  • 본 연구에서는 유류로 오염된 주유소 저장 창고 밑부분의 토양에서 경유 분해 균주를 순수분리한 후, 스크린 테스트를 거쳐 고효율의 경유분해균주 KDi19를 선별하였다. KDi19균주는 16S rDNA 분석, 지방산 분석, 생리 생화학적 특징 그리고 형태학적 특징을 확인한 결과 Pseudomonas sp.로 동정되었다. KDi19는 온도 $30^{\circ}C$, pH 7, 그리고 균농도 1.0 g/L의 조건에서 48시간 동안 초기 1,000 mg/L의 경유 중 956.3 mg/L(95.6%)를 제거하였다. 또한 균농도 1.0 g/L, pH 7의 조건에서, 낮은 온도($20^{\circ}C$, $15^{\circ}C$, $10^{\circ}C$) 적용 시, 경유 1,000 mg/L을 48시간 동안 각각 63.9%, 18.5%, 17.0% 제거하였다. 마지막으로 균 농도 1.0 g/L, pH 7, 온도 $30^{\circ}C$ 조건일 경우, KDi19는 저농도 경유 50 mg/L와 100 mg/L를 24시간 동안 각각 49.0 mg/L(97.9%)와 96.2 mg/L(96.2%)를 제거하였다.

유입구 및 정류벽 최적설계에 의한 최종 침전지 성능 개선 연구 (Performance Enhancement Study of a Final Clarifier by the Optimum Design of Inlet and Baffle Condition)

  • 김혜숙;신미수;장동순;정성희;강동효
    • 대한환경공학회지
    • /
    • 제27권2호
    • /
    • pp.177-183
    • /
    • 2005
  • 하 폐수 처리장의 방류수 수질은 최종 침전지의 성능에 의해 직접적으로 영향을 받으므로 최종 침전지의 효율적 설계 및 운전은 하 폐수 처리에 소요되는 비용 절감과 더불어 수질보전을 위한 하수 정화의 목표를 달성할 수 있다. 그러므로 본 연구에서는 장방형 최종 침전지의 성능 개선을 위하여 유입구 위치와 정류벽 설치에 따른 내부 유동특성 및 고형물질의 제거효율을 수치해석방법을 통해 평가하였다. 개발된 2차원 컴퓨터 프로그램은 방사성 추적자를 이용한 체재시간분포 곡선과의 비교를 통해 성공적으로 검증된 수치해석 모델로 수력학적 구조변경에 대한 침전지의 성능 예측을 가능하게 하였다. 최종 침전지의 유입구 위치는 낮을수록 침전지에 형성된 강력한 바닥흐름과 수표면 역흐름으로 나타나는 밀도류를 저감시켰으며 침강된 슬러지의 하류 이동을 감소시켰다. 최종 침전지 유입부에 설치된 정류벽은 유입수가 출구로 직접 흐르는 단락류를 방지하고 밀도 저류로 유입되도록 하여 방류수 수질을 향상시키나 유입구 위치가 낮은 경우에 설치된 정류벽은 오히려 방류수 수질을 떨어뜨리는 결과를 초래하였다. 결국 최종 침전지의 성능 개선을 위한 수력학적 구조변경 및 설계는 다양한 변수에 대한 조직적인 수치해석 연구가 필요하며 선행되어야 할 것으로 판단된다.

72시간 프로젝트로 본 소규모 유휴공간 재생 프로젝트의 경관적 개선 효과 (Visual Improvement Analysis of Small Scale Urban Regeneration Projects Focusing on '72 Hour Project')

  • 김현정;김영민
    • 한국조경학회지
    • /
    • 제49권1호
    • /
    • pp.19-30
    • /
    • 2021
  • 본 연구에서는 서울의 소규모 유휴공간을 시민참여의 방식으로 재생하는 "72시간 프로젝트" 사업의 경관적 개선 효과를 분석하였다. 2016년부터 2019년까지 조성된 29개소의 작품을 연구의 대상으로 삼았다. 12개의 경관형용사 쌍을 활용한 작품 조성 전·후의 경관 이미지 선호도를 분석하였으며, 설문 조사 결과를 바탕으로 기술 통계량 분석, 상관관계 분석, 요인분석, 군집분석, 분산분석을 시행하였다. 조성 후의 만족도는 3.63으로 프로젝트의 결과, 경관 개선의 효과가 있는 것으로 나타났다. 요인분석을 통해 조화성과 심미성이라는 두 가지 요인이 도출되었고, 군집분석을 진행하여 네 가지 군집 별 작품의 특성을 파악할 수 있었다. 군집분석의 결과, 조화성과 심미성이 모두 높은 군집이 종합만족도 평균도 가장 높았다. 다른 군집의 특성을 비교할 때 만족도 평가 시 조화성이 심미성보다 중요한 요인으로 작용하였다. 작품군의 정성적인 특징을 분석한 결과, 식재 면적이 풍부하며 시각적으로 두드러지는 시설물 중심의 설계보다는 공간적으로 균형감이 있는 설계가 경관 개선 효과가 크다는 결론을 도출하였다. 본 연구는 향후 이용자 행태 연구를 통해 보완될 필요성이 있으며, 향후 다양한 소규모 유휴공간 재생 사업의 발전적 방향을 수립하는데 기여할 수 있는 자료로 활용될 수 있을 것으로 기대된다.

The Contribution of Innovation Activity to the Output Growth of Emerging Economies: The Case of Kazakhstan

  • Smagulova, Sholpan;Mukasheva, Saltanat
    • 유통과학연구
    • /
    • 제10권7호
    • /
    • pp.33-41
    • /
    • 2012
  • The purpose of this study is to analyse the state of the energy industry and to determine the efficiency of its functioning on the basis of energy conservation principle and application of innovative technologies aimed at improving the ecological modernisation of agricultural sectors of Kazakhstan. The research methodology is based on an integrated approach of financial and economic evaluation of the effectiveness of the investment project, based on calculation of elasticity, total costs and profitability, as well as on comparative, graphical and system analysis. The current stage is characterised by widely spread restructuring processes of electric power industry in many countries through introduction of new technical installations of energy facilities and increased government regulation in order to enhance the competitive advantage of electricity market. Electric power industry features a considerable value of creating areas. For example, by providing scientific and technical progress, it crucially affects not only the development but also the territorial organisation of productive forces, first of all the industry. In modern life, more than 90% of electricity and heat is obtained by Kazakhstan's economy by consuming non-renewable energy resources: different types of coal, oil shale, oil, natural gas and peat. Therefore, it is significant to ensure energy security, as the country faces a rapid fall back to mono-gas structure of fuel and energy balance. However, energy resources in Kazakhstan are spread very unevenly. Its main supplies are concentrated in northern and central parts of the republic, and the majority of consumers of electrical power live in the southern and western areas of the country. However, energy plays an important role in the economy of industrial production and to a large extent determines the level of competitive advantage, which is a promising condition for implementation of energy-saving and environmentally friendly technologies. In these circumstances, issues of modernisation and reforms of this sector in Kazakhstan gain more and more importance, which can be seen in the example of economically sustainable solutions of a large local monopoly company, significant savings in capital investment and efficiency of implementation of an investment project. A major disadvantage of development of electricity distribution companies is the prevalence of very high moral and physical amortisation of equipment, reaching almost 70-80%, which significantly increases the operating costs. For example, while an investment of 12 billion tenge was planned in 2009 in this branch, in 2012 it is planned to invest more than 17 billion. Obviously, despite the absolute increase, the rate of investment is still quite low, as the total demand in this area is at least more than 250 billion tenge. In addition, industrial infrastructure, including the objects of Kazakhstan electric power industry, have a tangible adverse impact on the environment. Thus, since there is a large number of various power projects that are sources of electromagnetic radiation, the environment is deteriorated. Hence, there is a need to optimise the efficiency of the organisation and management of production activities of energy companies, to create and implement new technologies, to ensure safe production and provide solutions to various environmental aspects. These are key strategic factors to ensure success of the modern energy sector of Kazakhstan. The contribution of authors in developing the scope of this subject is explained by the fact that there was not enough research in the energy sector, especially in the view of ecological modernisation. This work differs from similar works in Kazakhstan in the way that the proposed method of investment project calculation takes into account the time factor, which compares the current and future value of profit from the implementation of innovative equipment that helps to bring it to actual practise. The feasibility of writing this article lies in the need of forming a public policy in the industrial sector, including optimising the structure of energy disbursing rate, which complies with the terms of future modernised development of the domestic energy sector.

  • PDF