• 제목/요약/키워드: Installation depth

검색결과 361건 처리시간 0.024초

SPATIAL AND TEMPORAL INFLUENCES ON SOIL MOISTURE ESTIMATION

  • Kim, Gwang-seob
    • Water Engineering Research
    • /
    • 제3권1호
    • /
    • pp.31-44
    • /
    • 2002
  • The effect of diurnal cycle, intermittent visit of observation satellite, sensor installation, partial coverage of remote sensing, heterogeneity of soil properties and precipitation to the soil moisture estimation error were analyzed to present the global sampling strategy of soil moisture. Three models, the theoretical soil moisture model, WGR model proposed Waymire of at. (1984) to generate rainfall, and Turning Band Method to generate two dimensional soil porosity, active soil depth and loss coefficient field were used to construct sufficient two-dimensional soil moisture data based on different scenarios. The sampling error is dominated by sampling interval and design scheme. The effect of heterogeneity of soil properties and rainfall to sampling error is smaller than that of temporal gap and spatial gap. Selecting a small sampling interval can dramatically reduce the sampling error generated by other factors such as heterogeneity of rainfall, soil properties, topography, and climatic conditions. If the annual mean of coverage portion is about 90%, the effect of partial coverage to sampling error can be disregarded. The water retention capacity of fields is very important in the sampling error. The smaller the water retention capacity of the field (small soil porosity and thin active soil depth), the greater the sampling error. These results indicate that the sampling error is very sensitive to water retention capacity. Block random installation gets more accurate data than random installation of soil moisture gages. The Walnut Gulch soil moisture data show that the diurnal variation of soil moisture causes sampling error between 1 and 4 % in daily estimation.

  • PDF

수평배수재가 포설된 준설매립지반의 압밀해석(I) - 프로그램 개발 및 검증 - (Consolidation Analysis of Dredged Fill Ground Installed with Horizontal Drains (I) - Program Development and Verification -)

  • 박정용;장연수;박정순
    • 한국지반공학회논문집
    • /
    • 제21권10호
    • /
    • pp.27-39
    • /
    • 2005
  • 수평배수재가 매설된 표층 준설 매립지반의 압밀해석을 하기 위한 유한 차분해석 프로그램을 개발하였다. 프로그램의 지배방정식은 1차원 자중압밀이론을 3차원으로 전개시킨 식을 이용하여 수평배수재가 설치된 지반의 다양한 경계조건을 적용하였으며 배수재로 간극수가 침투되는 침투압효과를 고려하였다. 해석프로그램의 타당성 검증을 위해서 실내 토조압밀시험을 실시하고 시간-침하량의 측정결과와 예측결과를 비교하였다. 수평배수재의 설계조건으로 배수재 횡방향 설치간격, 설치깊이, 설치층수의 변화가 압밀에 미치는 영향을 분석하였다.

봉상접지극과 Mesh접지극의 매설깊이 변화에 따른 위험전압 분석에 관한 연구 (Analysis of the Dangerous Voltage of Grounding Electrode According to the Burial Depth Levels)

  • 심용식;최홍규
    • 조명전기설비학회논문지
    • /
    • 제25권4호
    • /
    • pp.38-44
    • /
    • 2011
  • Grounding electrodes with higher burial depths are evaluated to have better performance, due to the domestic practice that puts the grounding resistance as the standard of performance evaluation, while grounding resistance decreases as the burial depth increases. However, The dangerous voltage is necessary for the analysis. Because the performance evaluation of grounding electrodes should include not only grounding resistance but also the dangerous voltage(mesh voltage and step voltage). So in this paper, The dangerous voltages of mesh grounding and rod grounding were analyzed for using computer simulation and miniature grounding model.

정밀 켈리브레이션 정합을 위한 화상측징계 (The Image Measuring System for accurate calibration-matching in objects)

  • 김종만
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
    • /
    • pp.357-358
    • /
    • 2006
  • Accurate calibration matching for maladjusted stereo cameras with calibrated pixel distance parameter is presented. The camera calibration is a necessary procedure for stereo vision-based depth computation. Intra and extra parameters should be obtain to determine the relation between image and world coordination through experiment. One difficulty is in camera alignment for parallel installation: placing two CCD arrays in a plane. No effective methods for such alignment have been presented before. Some amount of depth error caused from such non-parallel installation of cameras is inevitable. If the pixel distance parameter which is one of Intra parameter is calibrated with known points, such error can be compensated in some amount and showed the variable experiments for accurate effects.

  • PDF

PAC용 양흡입 시로코홴의 공력성능에 관한 실험적 연구 (Experimental Study on the Aerodynamic Performance of Double Inlet Sirocco Fan for a Package Air Conditioner)

  • 김장권;오석형
    • 동력기계공학회지
    • /
    • 제17권1호
    • /
    • pp.58-63
    • /
    • 2013
  • The aerodynamic performance of double inlet sirocco fan is strongly dependent upon the design factors of impeller and scroll. In this paper, the change of scroll size was adopted to investigate the aerodynamic performances of double inlet sirocco fan and indoor PAC. Especially, a scroll expansion angle and a cut-off clearance ratio were considered to change the scroll size. In addition, the installation depth between double inlet sirocco fan and indoor PAC was considered. As a result, the total pressure efficiency of double inlet sirocco fan shows about 62%~73% according to the change of scroll expansion angles. Moreover, the flowrate performance of indoor PAC is the best at the condition of a scroll expansion angle of 8°, an installation depth of 15 mm and a cut-off clearance ratio of 8%.

케이슨식 교량기초 제작 및 거치 시공사례 -울산 신항 방파제현장 시공 사례를 중심으로- (A Case Study of Caisson Typed Bridge-Foundation Fabrication and Installation in Ul-san Newport Breakwater Project)

  • 장병수;신성권;김덕호
    • 한국해양공학회:학술대회논문집
    • /
    • 한국해양공학회 2004년도 학술대회지
    • /
    • pp.45-50
    • /
    • 2004
  • The method of caisson typed bridge-foundation fabrication and installation applied in Ul-san newport breakwater project is throughly carried out to compact QRR mound vibro-hammer step by step to minimize settlement through stability check. Floating Dock was mobilized for caisson fabrication due to limited site area. fabricated caisson on the Floating Dock was towed to the deeper area of 8m water depth to be launched, and Floating Crane assisted launching and installation work of the caisson. finally water filling was done followed by surveying work to permanent installation.

  • PDF

스테레오비전시스템을 이용한 실내 영상감시시스템의 외란광 간섭 경감에 관한 연구 (A Study on External Light Noise Reduction Using Stereo Vision System in Image Monitoring System)

  • 김수인
    • 조명전기설비학회논문지
    • /
    • 제23권9호
    • /
    • pp.83-90
    • /
    • 2009
  • 본 논문은 스테레오 영상의 깊이정보특성을 이용하여 물체의 이등성분과 외란광에 의해 오인식되는 이동성분을 구분하여 외란광에 의한 오인식률을 경감하기 위한 방법을 제안한다. 추출된 이동성분으로부터 깊이정보의 변화를 측정, 변화가 미약한 경우 외란광으로 인식하여 이동물체가 없는 것으로 판단하도록 하였다. 실험 결과 외란광에 의한 오인식률과 그림자와 같은 허상에 의한 오인식률이 87.3[%]의 감소를 보여 본 논문에서 제안하는 방법의 유용성을 확인하였다.

대지구조에 따른 접지봉 주번의 대지표면전위분포 (Ground Surface Potential Distribution near Ground Rod Associated with Soil Structures)

  • 이복희;정현욱;백영환
    • 조명전기설비학회논문지
    • /
    • 제21권1호
    • /
    • pp.142-147
    • /
    • 2007
  • 본 논문은 대지구조와 접지봉의 매설깊이에 따른 대지표면의 전위상승에 대해서 기술하였다. 대지표면의 전위상승에 따른 인체의 감전사고의 저감에 관한 기초적 자료를 제안하기 위해서 접지봉 부근에서의 대지표면전위를 계산하고 측정하였다. 접지봉 부근의 대지표면전위상승은 대지구조에 크게 의존하며, 매설깊이가 깊어질수록 낮아졌다. 대지표면전위상승은 접지봉의 직상부에서 최대이었으며, 측정결과는 접지해석프로그램으로 계산한 결과와 잘 일치하였다.

진동차단공의 재료별 방진효과에 관한 해석적 연구 (Analytical Study on the Isolation Effects of Bore Holes by Materials)

  • 이강일
    • 한국지반신소재학회논문집
    • /
    • 제5권2호
    • /
    • pp.23-30
    • /
    • 2006
  • 본 연구는 환경진동으로 유발되는 진동 대책 중 전파 경로상에 방진구나 방진벽 등과 같은 진동차단벽을 설치했을 경우 차단벽의 재료를 방진구, 콘크리트, EPS, 철로 변화시켜 유한요소해석을 수행하여 진동을 가장 효율적으로 저감시킬 수 있는 재료 및 차단벽의 규모(타설심도, 차단벽두께, 진원으로부터의 거리)에 대하여 연구하였다. 본 연구 결과 방진구의 경우는 차단벽의 두께의 영향보다는 차단벽의 타설심도에 영향이 크고, 콘크리트의 경우에는 다른 방진벽의 방진효과에 비해 방진효과가 떨어진다. 또한 EPS의 경우는 타설심도 보다는 차단벽두께의 영향이 진동차단에 더 효과적임을 알 수 있었다.

  • PDF