• Journal of the Korea Safety Management & Science
• /
• v.19 no.3
• /
• pp.49-58
• /
• 2017

This paper suggests a specific model that could efficiently improve the interaction and the interface between MES(Manufacturing Execution System) server and POP(Point of Production) terminal through electronic document server and electronic pen, bluetooth receiver and form paper in disassembly and process inspection works. The proposed model shows that the new method by electronic document automation system can more efficiently perform to reduce processing time for maintenance work, compared with the current approach by handwritten processing system. It is noted in case of the method by electronic document automation system that the effects of proposed model are as follows; (a) While the processing time per equipment for maintenance by the current method was 300 minutes, the processing time by the new method was 50 minutes. (b) While the processing error ratio by the current method was 20%, the error ratio by the new method was 1%.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.6 no.2
• /
• pp.17-31
• /
• 2000

Port State Control(PSC) plays important roles in ensuring the ship＇ safety as well as preserving the marine environment in port and coastal sea. The effect of PSC carried out according to the procedure and document offered by Tokyo MOU depends greatly on inspector and inspection technique. So, it is very important to inspect ships impartially with advanced method. In the case of Korea, the only 30 percent of ships with deficiencies visited to ports are inspected due to the lack of PSC inspectors. So new inspection technique and module are required in order to improve inspection efficiency and to resolve problems mentioned. In this paper, we introduce a module for PSC inspection and evaluate it by inspecting 10 model ships and comparing with present method. The proposed module is expected to obtain the objectivity of inspection, to offer inspection guideline and to determine the priority of inspection ships.

• The Journal of the Korea Contents Association
• /
• v.16 no.10
• /
• pp.175-187
• /
• 2016

Protection of personal information has significant meaning in current information age. Information of crime victim is one of top in value in that divulgence of the information to perpetrators may threat safety of the victim or cause psychological demage as $2^{nd}$ harm if disclosed to public. Legal system protects the information with scattered statutes including Criminal Procedure Act. Existing studies have been limited to discussion of the single statute without integrated approach. Bearing necessity of the approach in mind, as issues of protection system this research proffers too broad subject of eligible inspection of case document, inactive practice of identity management cards and omission of personal information, and inappropriate punishment on the disclosure or divulgence. After reviewing systems of foreign jurisdictions to get useful implications, this paper suggests several measures with two separate aspect of legal provisions and protection practice.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.1
• /
• pp.85-100
• /
• 2023

In this study, in order to improve the installation periodical inspection method of waste treatment facilities, we conducted on-site surveys of waste treatment facilities classified into six fields, grasped the problems of inspection methods, and made improvements accordingly. And revised the inspection method for waste treatment facilities. As a result, in the field of incineration and incineration heat recovery, inspection methods such as total temperature measurement and one-year TMS data comparison using a thermal imaging camera were established. And for the safety of the inspected person, it was applied so that the waste can be replaced with a document without opening it. In the case of landfill facilities, the details regarding the use of video information processing equipment and the management of facilities covering the upper part of the landfill facility are presented in the law, but the items that do not have a inspection methods were applied to the inspection method. In the case of Food Waste Treatment Facility, inspection methods were put in place to ensure compliance with standards for foul-smelling fish in odor control, a major cause of complaints. As a result, 10 out of 18 improvement proposals were reflected in the incineration and sterilization grinding, cement kiln, and incineration heat recovery facilities, and 11 out of 12 improvement proposals were reflected in the landfill facility. In the case of food distribution waste treatment facilities, 10 out of 12 improvement proposals were reflected, and a total of 31 inspection methods were improved.

• Journal of Construction Engineering and Project Management
• /
• v.5 no.4
• /
• pp.16-22
• /
• 2015

This paper presents an automated computer vision-based system to update BIM data by leveraging multi-modal visual data collected from existing buildings under inspection. Currently, visual inspections are conducted for building envelopes or mechanical systems, and auditors analyze energy-related contextual information to examine if their performance is maintained as expected by the design. By translating 3D surface thermal profiles into energy performance metrics such as actual R-values at point-level and by mapping such properties to the associated BIM elements using XML Document Object Model (DOM), the proposed method shortens the energy performance modeling gap between the architectural information in the as-designed BIM and the as-is building condition, which improve the reliability of building energy analysis. Several case studies were conducted to experimentally evaluate their impact on BIM-based energy analysis to calculate energy load. The experimental results on existing buildings show that (1) the point-level thermography-based thermal resistance measurement can be automatically matched with the associated BIM elements; and (2) their corresponding thermal properties are automatically updated in gbXML schema. This paper provides practitioners with insight to uncover the fundamentals of how multi-modal visual data can be used to improve the accuracy of building energy modeling for retrofit analysis. Open research challenges and lessons learned from real-world case studies are discussed in detail.

• Advances in concrete construction
• /
• v.4 no.2
• /
• pp.89-105
• /
• 2016

The post - fire investigation is conducted on a fire-affected reinforced concrete shear wall building to ascertain the level of its strength degradation due to the fire incident. Fire incident took place in a three-storey building made of reinforced concrete shear wall and roof with operating floors made of steel beams and chequered plates. The usage of the building is to handle explosives. Elevated temperature during the fire is estimated to be $350^{\circ}C$ based on visual inspection. Destructive (core extraction) and non-destructive (rebound hammer and ultrasonic pulse velocity) tests are conducted to evaluate the concrete strength. X-ray diffraction (XRD) and Field Emission Scanning Electron Microscopy (FESEM) are used for analyzing micro structural changes of the concrete due to fire. Tests are conducted for concrete walls and roof slab on both burnt and unburnt locations. The analysis of test results reveals no significant degradation of the building after the fire which signifies that the structure can be used with full expectancy of performance for the remaining service life. This document can be used as a reference for future forensic investigations of similar fire affected concrete structures.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.532-536
• /
• 2015

This paper presents an automated computer vision-based system to update BIM data by leveraging multi-modal visual data collected from existing buildings under inspection. Currently, visual inspections are conducted for building envelopes or mechanical systems, and auditors analyze energy-related contextual information to examine if their performance is maintained as expected by the design. By translating 3D surface thermal profiles into energy performance metrics such as actual R-values at point-level and by mapping such properties to the associated BIM elements using XML Document Object Model (DOM), the proposed method shortens the energy performance modeling gap between the architectural information in the as-designed BIM and the as-is building condition, which improve the reliability of building energy analysis. The experimental results on existing buildings show that (1) the point-level thermography-based thermal resistance measurement can be automatically matched with the associated BIM elements; and (2) their corresponding thermal properties are automatically updated in gbXML schema. This paper provides practitioners with insight to uncover the fundamentals of how multi-modal visual data can be used to improve the accuracy of building energy modeling for retrofit analysis. Open research challenges and lessons learned from real-world case studies are discussed in detail.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.60-68
• /
• 2019

For effective building maintenance, the collection and management of various maintenance date such as work history information and material information is required. Despite the introduction of information management technologies and systems to reduce the amount of maintenance work of buildings, which have become larger and more complex, the maintenance information is not being utilized properly. As an alternative, research on the introduction and utilization of BIM is being conducted continuously. However, the BIM models generated at the design phase are not utilized in practice due to a lack of architectural maintenance information. This study proposed a COBie document prototype to support BIM-based smart maintenance tasks performed by building managers. In order to formalize various types of maintenance work procedures, a BIM-based maintenance process model is presented in two categories: inspection and maintenance. Among the BIM attribute data of the BIM model generated at the design phase, the parameters corresponding to the maintenance necessary information for each basic process are derived. Based on this, we proposed a COBie document prototype consisting of seven spreadsheets. The results of a case study confirmed that the KBIMS library-based BIM model created at the design phase without the maintenance information can be used at the maintenance phase.

• Health Policy and Management
• /
• v.27 no.4
• /
• pp.347-358
• /
• 2017

Background: The recent revision of South Korea's Mental Health Law emphasizes the role of the Mental Health Review Board. For this study, we examined the current status of continuing hospitalization judgement in Mental Health Review Board at the national level and aimed to determine the directions of improvement. Methods: Using a qualitative case study as the research method, we interviewed 30 Mental Health Review Board members and analyzed the results. Results: Each municipality had very different continuing hospitalization judgement methods. In our systematic review, which consisted of document inspection, we identified reliability problems due to limitations in Mental Health Review Board's operating systems, discharge orders, etc. Additionally, continuing hospitalization judgement needs to improve the objectivity, fairness, and effectiveness of their screening examinations. Conclusion: Based on the results of this study, we suggest policy proposals to improve these systems, such as standardizing examination processes, strengthening on-site inspections, increasing the independence and neutrality of judgment in Mental Health Review Board, building community mental health infrastructures, and establishing integrated management systems.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.1 s.45
• /
• pp.43-50
• /
• 2007

Delay in the process of Information Extraction, IE, is largely due to inability to correctly recognize the user's information requirement of particular search factors. Especially if the wrapper rules are used in a search engine, the search generally fails to classify internet documents properly and efficiently since the application of the same wrapper rules lacks extensibility throughout various types of existing internet document. In case of buying or selling a ship, if the price range, type. place of delivery, inspection site and other information relevant to the sales would be available through the internet for proper retrieval the sales could more readily succeed by using Ontology relating to sales or purchase information and by selectively searching for the desired information through the content based retrieval system. This system proposes to improve various wrapper systems existing throughout different internet sites and to eliminate unnecessary information tagged on the existing internet documents in order to create a more advanced information retrieval system.