• Ocean and Polar Research
• /
• 제39권2호
• /
• pp.159-168
• /
• 2017

To evaluate the accuracy of UAV photogrammetry for Hyangho coast, eastern coast of Korea, we conducted a field experiment wherein UAV photogrammetry test was repeated three times. Since the Haygho coast is located within a military reservation zone, it was necessary to obtain permission to gain access to the beach and to have sensitive aerial photographs showing military facilities inspected and cropped. The standard deviation of the UAV shooting position between the three tests was less than 1 m, but repeatability of footprint on the ground was low due to wind-driven variability of the UAV pose. Self-calibrating bundle adjustment(SCBA) of implementing non-metric camera calibration was failed in one test. In two tests, the vertical error was twice as large as the pixel size except for those areas that were subject to security inspection and cropping. Given the problems that can arise with regard to the repeatability of the shooting area as well as the possibility of failure with regard to SCBA, we strongly recommend that UAV photogrammetry in coastal areas needs to be repeated at least twice.

• 한국정밀공학회지
• /
• 제16권4호통권97호
• /
• pp.57-63
• /
• 1999

A thin metal plate such as detent spring has the shape deformation due to the phenomenon of spring back after press machining and heat treatment process. This requires the correction of spring shape and force in final inspection process. To do correction of the shape deformation the impact force is manually applied to the bended part of detent spring after measuring the shape deformation and spring force. To develop the automatic spring force correction system, applied force of occurring plastic deformation must be derived from the experimental method. But frequent change of spring shape and material makes it difficult to accomplish the experimental method to be applied. This paper describes the analytical method for detent spring force correction system is to be substituted for the experimental method. FEM(Finite Element Method) is used to find the boundary value between elastic and plastic deformation in the analytical method. To confirm the validity of the analytical method, the result of two methods is compared each other at various applied force conditions. It shows that the simulation result of the analytical method is consistent with the result of the experimental method within the error bound ${\pm}$5%. The result of this paper is useful for development of the automatic spring correction system and reduction of the complicated and tedious processes involved in experimental method.

• 한국광학회지
• /
• 제20권4호
• /
• pp.241-248
• /
• 2009

액정 디스플레이에서 시야각 향상을 위해 사용하는 보상판과 편광판을 접합한 복합판의 광축 틀어짐 오차와 보상판의 $R_{in}$(in-plane retardation), $R_{th}$(out-of-plane retardation)를 동시에 결정하는 새로운 방법을 제시하였다. 보상판은 광축이 임의의 기울임각과 방위각을 갖는 o-판으로 하였으며, 확장된 존스 행렬법에 기반한 광학모델을 도입하여 복합판의 편광특성을 분석하였다. 입사각 0도와 50도에서 시료의 방위각을 360도 회전시키며 투과된 빛의 편광상태를 각각 계산한 후, 타원법의 모델링 분석기법을 적용하여 광축 틀어짐과 복합판의 기울임각과 방위각들을 역방계산하였다. 이 방법은 편광판과 보상판을 접합한 후에도 복합판의 성능평가를 할 수 있어 제조공정단계를 줄여 제조 원가를 절감하는데 기여할 수 있을 것으로 기대된다.

• 한국CDE학회논문집
• /
• 제13권2호
• /
• pp.139-152
• /
• 2008

In order to survive worldwide competition, today's industries are experiencing strong pressure to introduce higher quality products with lower cost and shorter lead-time. Therefore, the role of design in the process of product development is increasing in significance. In this research, two methods for improving the design capability are proposed: construction of design environment and design automation using 3D CAD system. The designers and design process are the core of product design using 3D CAD system. In order to maximize the design performance, construction of the design environment including selection of a suitable system, designer training for best use of the system, establishment of an efficient design process, and stabilization of the environment are required. A method is suggested to construct design environment by systematizing the contents of the projects and consulting experiences carried out for various categories of business such as electronic devices, motorcycles, electricity parts, sanitary wares, injection molds, and die casing molds. Design automation helps reduce tedious and time-consuming jobs, simplify complicated and error-prone modeling and drawing works to shorten the lead time and improve the product quality. To develop a design automation system, understanding the process and the related knowledge on design are very important before implementing the system using API provided by 3D CAD system. In this research, an eight-step procedure is proposed for the development of a design automation system. These eight steps are analysis of needs, determination of specification, verification of specification using 3D CAD system, inspection of related API functions, programming, field test, application in practice, and maintenance. A case study in which five design automation systems in the design of turbine generators using the proposed method is introduced in detail. These systems play important roles in the generation of various output items including 3D models, drafts, material information, and NC data. The case study shows how effectively the design time is reduced and the quality improved using those systems.

• 디지털융복합연구
• /
• 제10권11호
• /
• pp.535-540
• /
• 2012

본 연구는 동일한 공간 내에서 동일한 활동을 수행하고 있는 젊은 성인들의 눈물 상태를 조사하여, 하루 동안 눈물의 변화를 비교해 보고자 하였다. 본 연구의 목적에 동의한 지원 대상안 중 예비 검사와 하루 중 두 번의 검사에 모두 참여하고, 눈 건강 상태에 영향을 미칠만한 전신질환과 안질환이 없으며, 정위상태이며, 교정시력이 성인이 일상생활에 불편감이 없는 0.8 이상이고, 각막의 약주경선 곡률반경이 수평방향이고, 강주경선 곡률반경이 수직방향인 대학생 37명(58안)을 대상으로 하였다. 전체 대상안에 대하여, 나안시력, 굴절이상도, 각막 곡률반경, 쉬머테스트, 눈물막 파괴시간 검사를 실시하였다. 쉬머테스트 결과 쉬머 용지가 눈물의 수성층에 의해 적셔진 양은 오전 중에 $16.0{\pm}7.0mm$이었으며, 일과 후에는 $14.1{\pm}7.1mm$로 줄어 들었다. 눈물막 파괴 검사로 각막의 건조점이 나타나는 시간은 오전 중에 $11.3{\pm}0.6$초이었으며, 일과 후에는 $12.1{\pm}0.9$초로 늘어났으나 유의한 차이는 없었다.

• 한국철도학회논문집
• /
• 제13권6호
• /
• pp.608-616
• /
• 2010

서울지하철 5,6,7,8호선을 운영하는 서울도시철도공사는 연장 152km, 148개 역사에 분산되어 있는 시설물에 대하여 점검과 유지보수를 하고 있다. 장애예방을 위한 철저한 점검에도 불구하고 지하역사의 환경적인 요인, 빈번한 사용으로 인한 기계적인 마모, 시설물 노후화, 시스템 에러, 이용 상의 부주의 등으로 장애가 지속적으로 발생하고 있다. 서울도시철도공사에서는 지금까지 관행적으로 수행해 오던 시설물 점검방법과 유지보수의 틀을 깨고 정량적인 목표관리와 일하는 방식 변화 등을 통해 2010년 6월말까지 장애를 연간 53.4% 감소시켰다. 본 논문에서는 기존 도시철도 시설물 점검 및 유지보수의 문제점을 분석하고, 이를 개선하기 위해 추진했던 장애감소 전략과 각각의 추진성과를 분석한다.

• 농업과학연구
• /
• 제47권2호
• /
• pp.315-326
• /
• 2020

In this study, a real-time crop recognition system was developed for an unmanned farm machine for upland farming. The crop recognition system was developed based on a stereo camera, and an image processing framework was proposed that consists of disparity matching, localization of crop area, and estimation of crop height with coordinate transformations. The performance was evaluated by attaching the crop recognition system to a tractor for five representative crops (cabbage, potato, sesame, radish, and soybean). The test condition was set at 3 levels of distances to the crop (100, 150, and 200 cm) and 5 levels of camera height (42, 44, 46, 48, and 50 cm). The mean relative error (MRE) was used to compare the height between the measured and estimated results. As a result, the MRE of Chinese cabbage was the lowest at 1.70%, and the MRE of soybean was the highest at 4.97%. It is considered that the MRE of the crop which has more similar distribution lower. the results showed that all crop height was estimated with less than 5% MRE. The developed crop recognition system can be applied to various agricultural machinery which enhances the accuracy of crop detection and its performance in various illumination conditions.

• 한국의류학회지
• /
• 제29권11호
• /
• pp.1399-1409
• /
• 2005

The purpose of this study was to analyze the shape of gathered skirts using a three-dimensional measurement system. And in this experiment, I try to accumulate three-dimensional data of wearing model and to figure out analyzing method made by shape of clothes. The experimental design consists of two factorial designs. I set up three different kinds of fabrics, ratio of gathers. Therefore nine samples were made. The instrument and tools for three-dimensional measurement was whole body 3D scanner. Analysis program used in experiment is RapidForm 2004 PP1 and Pattern Design 2000. Data analysis utilizes SPSS WIN 10.0 Package. T-test to effect an inspection of evidence, there was difference about measurement times. One-way ANOVA to analysis effect of gather made by gathering conditions. The following results were obtained; 1. As a result of inspecting an error several times using a three-dimension measurement system, convinced data was obtained. 2. At front, distribution of gap amount was larger than back. And as ratio of gathers increased, distribution of gap amount showed regularly. 3. After analyzing horizontal sectional figure of skirts, as a height of skirt changed from waist to the bottom of skirts, the results showed as follows. While section width, section thickness, node width, node depth increased, node count decreased. 4. With the horizontal section levels of gather skirt, the silhouette on middle hip section was similar with the silhouette of body line. And as ratio of gathers around hip section increased, nodes showed regularly. At the bottom of skirts showed different nodes by different gathering condition.

• 한국광학회지
• /
• 제16권4호
• /
• pp.361-365
• /
• 2005

표면거칠기가 큰 가공면의 표면형상을 비접촉 고속 측정 하기 위해 고안된 점광원 절대간섭계는 점광원의 위치가 시스템 변수로 정의된다. 시스템 오차인 점광원의 위치 오차가 측정 결과에 미치는 영향을 분석하며, 이를 보정하기 위해 CCD 카메라를 이용한 보정법을 제안한다. 제안된 방법을 검증하기 위해 기준면을 측정하여 측정 정밀도의 향상을 확인하며, 이를 거친 표면형상의 특징을 가진 칩모듈 측정에 적용하였다. 측정 결과 기존의 촉침식 측정기와 $50mm{\time}50mm$의 영역에서 $9.8{\mu}m$의 측정 차이를 보임을 확인하였다.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제33권3호
• /
• pp.335-343
• /
• 2006

본 논문에서는 수술 전에 획득한 전산화 단층촬영영상에서 추출한 3차원 정보를 수술 중에 획득한 2차원 X-선 투시영상에 실시간으로 표시하기 위하여 표식기 기반 고속 2차원-3차원 영상정합 방법을 제안한다. 정합과정은 전처리 과정과 실시간 정합 과정으로 나누어진다. 전처리 과점에서 가장 많은 계산량을 필요로 하는 DRR의 생성을 그래픽 하드웨어를 이용하여 고속으로 생성하고, 표식기를 부착한 심장 모형데이타에서 자동으로 표식기를 탐색 추출 한다. 실시간 정합 과정은 주축 정합을 이용한 평면 내부 정합과 구좌표계에서 최소 오차 탐색 방법을 이용한 평면 외부 정합 방법으로 분리하여 계층적으로 정합하여 탐색 범위를 6자유도에서 2자유도로 개선하였다. 본 제안방법은 실시간 계산을 최소화함으로써 정확성을 유지하면서 정합의 효율성을 개선하였다.