• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 춘계학술대회논문집
• /
• pp.431-436
• /
• 2005

In this paper, We proposed the stereo image modeling using 2-dimensional images captured by the high resolution cameras to inspect the ball defects of BGA(Ball Grid Array) device. The proposed algorithm consists of the package/ball area extraction part, the FOV(Field of View) calibration part, the top point matching part, and ball height measurement part, In the package/ ball area extraction part, the package and ball areas are separately extracted in a left and right image by the extraction algerian. Through the experiment, we draw out the result.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2414-2417
• /
• 2005

Compact Camera Module(CCM) is widely used in PDA, Celluar phone and PC web camera. With the greatly increasing use for mobile applications, there has been a considerable demands for high speed production of CCM. The major burden of production of CCM is assembly of lens module onto CCD or CMOS packaged circuit board. After module is assembled, the CCM is inspected. In this paper, we developed the image capture board for CCM and the imaging processing algorithm to inspect the defects in captured image of assembled CCMs. The performances of the developed inspection system and its algorithm are tested on samples of 10000 CCMs. Experimental results reveal that the proposed system can focus the lens of CCM within 5s and we can recognize various types of defect of CCM modules with good accuracy and high speed.

• 한국해양공학회지
• /
• 제16권5호
• /
• pp.66-72
• /
• 2002

Fracture behaviors of pipes with local wall thinning are very important for the integrity of nuclear power plant. However, effects of local wall thinning on strength and fracture behaviors of piping system were not well studied. Acoustic emission(AE) has been widely used in various fields because of its extreme sensitivity, dynamic detection ability and location of growing defects. In this study, we investigated failure modes of locally wall thinned pipes and AE signals by bending test. From test results, we could be divided four types of failure modes of ovalization, crack initiation after ovalization, local buckling and crack initiation after local buckling. And fracture behaviors such as elastic region, yielding region, plastic deformation region and crack progress region could be evaluated by AE counts, accumulative counts and time-frequency analysis during bending test. The result of the frequency range is expected to be basic data that can inspect plants in real-time.

• 한국정밀공학회지
• /
• 제20권9호
• /
• pp.92-99
• /
• 2003

Quality inspection of textile products is an important problem for fabric manufacturers. This paper presents an automatic vision-based system for quality control of web textile fabrics. Typical web material is 1-3m wide and is driven with speeds ranging from 20m/min to 200m/min. At the present, the quality assessment procedures are performed manually by expert. But worker can not detect more than 60％ of the present defect and inspect the fabric if moving faster than 30m/min. To increase the overall quality and homogeneity of textile, an automated visual inspection system is needed fur the productivity. However, the existing inspection system are too expensive to purchase for small companies. In this paper, the proposed PC based real-time inspection algorithm gives low cost textile inspection system, high detection rate with good accuracy and low rate of false alarms. The method shows good results in the detection of several types of fabric defects.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.219-219
• /
• 2000

A Plate type pipe is used for heat exchange in radiator of a vehicle. The pipe has several rooms through which water flows and heat is dissipated into outside . In the case that there are small holes, cracks or some scratches on the plate, the radiators lost their functions due to Leakage. This may result in overheating of engine in a car. Thus, we need to perform the entire inspection of the plate type pipe in advance before assembling the radiator. In manufacturing process of the plate type pipe, the productive speed is very high and that may be performed continuously. So, there is no room to perform the outlook inspection by typical image processing techniques. This paper proposes a new method to inspect the outlook surface of the plate type pipe automatically with high speed. Especially, the sequential processing technique of an algorithm which detects defects on the surfaces of the plate type pipe is proposed for line scan camera which captures line image. To evaluate the inspection performance, a series of experiments is performed.

• 한국자동차공학회논문집
• /
• 제12권5호
• /
• pp.108-117
• /
• 2004

In this paper, a measuring NDT(nondestructive testing) system using RUS(Resonant Ultrasound Spectroscopy) was built for nondestructive evaluation of the flaw in a ceramic Ferrule. The principle of RUS is that the mechanical resonant frequency of the materials depends on density, and the coefficient of elasticity. The RUS system is the measuring which is to exite specimen and to inspect the difference of natural frequency pattern between acceptable specimen and specimen which has some defects. RUS system is configured of spectrum analyzer, power amplifier, PZT sensor and support frame. For defect evaluation by the RUS, we performed to measure natural frequency of Ferrule, both acceptable and cracked. In the case of Ferrule, the resonant frequency of cracked-Ferrule existed to higher frequency band than acceptable-Ferrule.

• 한국자기학회지
• /
• 제10권6호
• /
• pp.302-309
• /
• 2000

박강판의 내부에 존재하는 개재물성 결함을 검사하기 위해 누설자속법을 이용하여 탐상하는 시스템을 개발하였다. 연자성 코어의 보자력을 이용한 차등형 플럭스게이트 자력계를 제작하였다. FEM 소프트웨어를 이용하여 전자석을 설계하였으며, 3축 이동이 가능한 누설자속탐상장치를 제작하여 냉연강판을 검사한 결과 개재물성 결함을 검사학 수 있음을 알았다. 누설자속값을 디지털화하여 2차원 이미지로 처리한 결과 냉연강판에 존재하는 개재물성 결함 이외의 결함을 일부 구분할 수 있음을 알았다.

• 마이크로전자및패키징학회지
• /
• 제24권2호
• /
• pp.55-59
• /
• 2017

본 논문은 마이크로 BGA(Ball Grid Array)의 3차원 형상 검사를 위한 광학적 방법에 관한 것으로, 특히, LED를 공간적으로 배치한 광원과 경면반사특성을 이용하였다. 이를 위해 비전시스템을 구성하여 BGA의 반사영상을 취득한 후, 영상처리를 통하여 반사된 LED 점광원의 위치를 추출하여 형상검사에 이용하였다. 또한, 영상에 포함된 복수개의 BGA에 대한 상대적 위치의 통계치를 이용하여 BGA 3차원 형상의 결함을 판단하는 방법을 제안하였고, 실험을 통하여 제안된 방법의 효용성을 보였다.

• 반도체디스플레이기술학회지
• /
• 제18권4호
• /
• pp.143-148
• /
• 2019

Numerous pipe lines can be found on various plant-based industrial sites. These pipelines should be periodically checked for defects. Most of these pipelines are internally inaccessible and difficult to visually inspect. Therefore, the inspection is being carried out with the help of non-contact inspection equipment such as ultrasonic flaw detection equipment. The use of ultrasonic flaw detection equipment can raise time and efficiency issues. In order to solve this problem, we will study the basic technology necessary for the development of automated inspection system equipped with ultrasonic measuring equipment and verify the validity through the fabrication of the demonstration device.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2022년도 추계학술대회
• /
• pp.168-169
• /
• 2022

전기차 시장이 급격하게 성장함에 따라 배터리 시장의 크기도 그에 따라 기하급수적으로 커지고 있다. 전기차에 탑재되는 배터리에 대한 품질 제어 기술의 발전 속도와 배터리 양산화 속도의 괴리로 인해 배터리에 대한 많은 내구성 문제가 발생하고 있다. 대다수 사고는 전기적 요인에 발생하나 이를 신속하게 검사할 수 있는 기술이 존재하지 않는다. 본 논문에서는 GAN 모델을 이용해 배터리 셀의 불량을 신속하게 분석하는 방법에 대해 제안하려 한다.