• Analytical Science and Technology
• /
• v.7 no.4
• /
• pp.455-460
• /
• 1994

A selective extraction-spectrophotometric method for the determination of mercury(II) with nocotinaldehyde-4-phenyl-3-thiosemicarbazone(NPS) was described. The method is based on the formation of an insoluble mercury-NPS complex, which is extratable into chloroform from an aqueous solution at pH 3.5 by shaking for 3 min. The absorbance is measured at 365nm and the molar absorptivity is $2.45{\times}10^4L\;mol^{-1}\;cm^{-1}$. The complex system conforms to Beer's law for up to $18{\mu}g\;mL^{-1}$ of mercury(II). The proposed method is simple and selective and has been satisfactorily applied to the determination of mercury in standard human hair sample.

• Resources Recycling
• /
• v.8 no.1
• /
• pp.18-22
• /
• 1999

In order to utilize incineration fly ash of industrial wastes as resources, we present the recovery and separation of metals included in the fly ash by leaching with aqueous solution A great quantity of Cu, Pb, and Zn as well as a small amount oftoxic heavy metals are contained in the leach liquor of the fly ash, and the concentration of the ingredients of the fly ash depends on the industrial wastes which are fed into incinerators. In this paper, sequential Ieachiog operations are conducted using $H_2O$, $H_2SO_4$, $(NH_4)_2CO_3$ and NaOH as Icachants. Water soluble copper salt was leached by $H_2O$, Zn and Pb were separated by the NaOH leach liquor, and water insoluble copper was selectively leached as chelate ion with the $(NH_4)_2CO_3$ leach liquor of the third Ieaehant. Results show that the reduction percent of the fly ash in the leaching steps using $H_2O$, $H_2SO_4$, and $(NH_4)_2CO_3$ is 77%, and the other leaching procedures lose the weight of fly ash by above 60%.

• Journal of Radiation Industry
• /
• v.6 no.2
• /
• pp.153-158
• /
• 2012

In this research, poly(acrylic acid) (PAAc) hydrogels containing zinc oxide particle were prepared by gamma-ray irradiation. PAAc powder was completely dissolved in distilled water at room temperature. Water-insoluble zinc oxide powder were added into the PAAc solution and stirred until totally dissolved. Finally, the mixture was irradiated by gamma-ray irradiation to make crosslinking. The effects of various parameters such as zinc ions' concentration, irradiation doses were varied and investigated in detail. PAAc hydrogels containing zinc oxide particle were characterized by gel content and swelling ratio. Moreover, the antibacterial properties of this material were evaluated by paper diffusion test against the Gram positive and Gram negative bacteria.

• Macromolecular Research
• /
• v.17 no.11
• /
• pp.850-855
• /
• 2009

Keratin is an important protein used in wound healing and tissue recovery. In this study, keratin was modified chemically with iodoacetic acid (IAA) to enhance its solubility in organic solvent. Poly(hydroxybutylate-co-hydroxyvalerate) (PHBV) and modified keratin were dissolved in hexafluoroisopropanol (HFIP) and electrospun to produce nanofibrous mats. The resulting mats were surface-characterized by ATR-FTIR, field-emission scanning electron microscopy (FE-SEM) and electron spectroscopy for chemical analysis (ESCA). The pure m-keratin mat was cross-linked with glutaraldehyde vapor to make it insoluble in water. The biodegradation test in vitro showed that the mats could be biodegraded by PHB depolymerase and trypsin aqueous solution. The results of the cell adhesion experiment showed that the NIH 3T3 cells adhered more to the PHBV/m-keratin nanofibrous mats than the PHBV film. The BrdU assay showed that the keratin and PHBV/m-keratin nanofibrous mats could accelerate the proliferation of fibroblast cells compared to the PHBV nanofibrous mats.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.22 no.2
• /
• pp.101-105
• /
• 2011

Transparency and insolubility of eardrum patch against exudates are important for otolaryngological surgery. The author prepared silk fibroin (SF) films with various concentrations and temperature and then examined solubility and conformation of SF films. SF films were transparent regardless of the various preparation conditions. Although most SF films are soluble in 1X PBS solution at $37^{\circ}C$ for 1 h, the SF film with 3.4% with $60^{\circ}C$ was insoluble. Scanning electron microscopy (SEM) showed that the SF films have solid and smooth surface. Fourier transform infrared spectroscopy (FT-IR) and differential scanning calorimetry (DSC) results showed that the conformation of SF films was influenced by the preparation conditions including SF concentration and casting temperature. In conclusion, SF membrane with transparence and insolubility against exudates could be considered as eardrum patch resources.

• Food Engineering Progress
• /
• v.14 no.2
• /
• pp.118-126
• /
• 2010

The fibrous material fraction as a by-product from the commercial aloe vera gel processing was obtained and freeze dried. The physicochemical characteristics such as the proximate composition, crystalline/surface structures and several physical functionalities including the water holding capacity (WHC), swelling capacity (SW), oil holding capacity (OHC), emulsion/foam properties and viscosity properties of this powdered sample (100 mesh) were investigated and analyzed by comparison with commercial $\alpha$-cellulose as a reference sample. The total dietary fiber content of powdered sample was very high as much as 87.5%, and the insoluble dietary and soluble dietary fiber content ratios were 77.6 and 22.4%, respectively. The FT-IR spectrum of powdered sample showed a typical polysaccharide property and exhibited a x-ray diffraction pattern for cellulose III and IV like structure. SW (8.24${\pm}$0.15 mL/g), WHC(6.40${\pm}$0.19 g water/g solid) and OHC(10.32${\pm}$0.29 g oil/g solid) of freeze dried aloe cellulose were about 3.3, 1.4 and 2 times higher than those of commercial $\alpha$-cellulose, respectively. Aloe cellulose (~2%, w/v) alone had no foam capacity while improved the foam stability of protein solution (1% albumin+0.5% $CaCl_{2}$) by factor of 300%. Emulsion capacity of 2%(w/v) aloe cellulose was about 70% level of 0.5%(w/v) xanthan gum, but its emulsion stability was about 1.2 times higher than that of xanthan gum. Also, aloe cellulose containing CMC (carboxyl methyl cellulose) of 0.3%(w/v) showed a very good dispersity. Aloe cellulose dispersion of above 1%(w/v) exhibited higher pseudoplasticity and concentration dependence than those of $\alpha$-cellulose dispersion, indicating the viscosity properties for new potential usage such as an excellent thickening agent.

• Journal of Sericultural and Entomological Science
• /
• v.21 no.2
• /
• pp.11-19
• /
• 1979

This has been carried out how the sericin insoluble fixations of raw silk should be with potassium alum. This is learned from the leather tanning technique which the process works with collagen, a kind of proteins. Former reports had shown such works, however, they did not consider the moisture absorbability after their process reports by using chromium alum, formalin or vinyl acetate grafting. This report, however, paid attention to protect such absorbability as well as sericin fixation, so far it may be useful for plactical use of silk. In order to clear how the sericin is fixed with such chemicals, fundermental mechanism of weding process and chemical reaction against proteins were also discussed. The obtained results of the report are as followings. 1. Alum should not be treated for raw silk with high temperature bath like other reports because such treat induces raw silk to be stiffly after the treat. 2. It is recommended that raw silk should be treated with alum solution at room temperature for more than three hours. Even in this case, the use of only alum with raw silk could to fix sericin some how, but it increased the water proofness of the silk. 3. 1% of alum solution was found to be able to fix the sericin of raw silk. 4. In case we consider only sericin fixations, a combination treat of 1% alum for three hours and 0.5% NaOH for ten minutes method showed the best result. 5. In case we consider sericin insoluble fixation and moisture absorbility, the reversive combination of the above process was found to be the best results. 6. Sericin fixing evidence was shown with drying feature curves of wed each treated silk where we could to analyze how the chemical nature is changed after each treat. 7. Deguming ratio may be obtained up to 4.3% after the alum combination treat with regular raw silk. Such ratio was considered to be good enough for the purpose when the textile is washed with warm soap water. 8. Moisture absorbability of the combination treat of alum and NaOH was found to be good enough as well as non treated silk. 9. The tenacity and elongation of the treated silk did not change even after three month. 10. Above all, this method is considered to be better process than other coloured fixing (tannin method. Cr-alum method) or smell fixing (formalin method. vinyl acetate method).

• KSBB Journal
• /
• v.19 no.4
• /
• pp.321-326
• /
• 2004

Microparticles of an inclusion complex between itraconazole and 2-hydroxypropyl-${\beta}$-cyclodextrin (HP-${\beta}$-CD) were prepared using an environmentally-benign supercritical anti-solvent (SAS) process. In order to evaluate the degree of complexation, the thermal behavior of solid micro particulate complexes was investigated using differential scanning calorimetry. The experimental results obatined for the solubility and dissolution rate of the microparticulate inclusion complexes in a buffer solution of pH 1.2 showed that the complexation of itraconazole with HP-${\beta}$-CD results in a significant increase in the solubility and dissolution rate of itraconazole. For the microparticulate itraconazole/Hp-${\beta}$-CD inclusion complexes prepared by the SAS process, about 80% of itraconazole was found to dissolve in the buffer solution. Our experimental results confirmed that the SAS process is a promising method for the preparation of microparticles of water-insoluble drug/cyclodextrin inclusion complexes.

• Resources Recycling
• /
• v.19 no.4
• /
• pp.41-50
• /
• 2010

A fundamental study was carried out to develop a process for recycling tungsten and cobalt from WC-Co hardmetal sludge generated in the manufacturing process of hardmetal tools. The complete extraction of cobalt and simultaneous formation of tungstic was achieved by treating the sludge using aqua regia. The effect of aqua regia concentration, reaction temperature and time, pulp density on cobalt leaching and tungstic acid formation was investigated. The complete leaching of cobalt was attained at the optimum conditions: 100 vol.% aqua regia concentration, $100^{\circ}C$ temperature, 60 min. reaction time and 400 g/L pulp density. A complete conversion of tungsten carbide of the sludge to tungstic acid was however, obtained at the pulp densities lower than 150 g/L under the above condition. The progress of reaction during the aqua regia treatment of the sludge was monitored through the XRD phase identification of the residue. The metallic impurities in the tungstic acid so produced could be further removed as insoluble residues by dissolving the tungsten values in ammonia solution. The ammonium paratungstate($(NH_4)_{10}{\cdot}H_2W_{12}O_{42}{\cdot}4H_2O$) of 99.85% purity was prepared from the ammonium polytungstate solution by the evaporation crystallization method.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.6
• /
• pp.1074-1079
• /
• 1996

Physicochemical characteristics of pigment separated from cockle shell were studied. Pigment on the cockle shell was peeled with distilled water, and soaked in 4% TCA solution for 30 minutes and filtered. Filtrate was washed 3 times with distilled water and Iyophilized. Dried pigment was dissolved with 2N NaOH solution and preparative TLC with 2N NaOH : acetone(1 : 1). UV/vis spectrum of pigment separated from cockle shell and melanin as standard was same one peak at UV area and λ$_{max}$was 226nm. Dissolved property of pigment was same as that of melanin. Pigment was not ommochrome but like melanin, because it was insoluble in formic acid, whitening in $H_2O_2, $ and pattern of UV-spectrum was same as melanin. Pigment separated from cockle shell was stable at high temperatures. In thermal treatment at $70^{\circ}C, $ $80^{\circ}C, $ $90^{\circ}C$ and $100^{\circ}C$ for 8 hours, retention ratio of pigment separated from cockle shell were 95.0%, 93.3%, 90.8% and 87.6%, respectively.