• 제목/요약/키워드: Inside-out method

검색결과 481건 처리시간 0.03초

UAV를 이용한 경관분석 및 활용방안에 관한 기초연구 (Study of the UAV for Application Plans and Landscape Analysis)

  • 김승민
    • 한국전통조경학회지
    • /
    • 제32권3호
    • /
    • pp.213-220
    • /
    • 2014
  • 본 연구는 최근 급속한 기술발전이 이루어지고 있는 (UAV)를 활용하여 지형분석에 적용하기 위한 실험적 연구로 드론과 자동 경로비행에 필요한 시스템을 구축하였다. 구축된 시스템을 이용하여 경로비행의 안정성을 검토하였으며, Waypoint를 이용한 경로비행 촬영을 실시하여 유용성을 검증한 결과는 다음과 같다. 첫째, 9.3ha에 달하는 면적에 대해 경로비행을 실시한 결과 준비시간을 포함하여 실측시간이 총40여분 소요되었으며, 지상부에서 인가한 고도와 속도를 일정하게 유지하는 것을 알 수 있었다. 또한 경로비행 시 지상부에서 설정한 Waypoint 지점에서 정확하게 촬영임무를 수행하여, multicopter를 이용한 사진실측의 효율성을 확인하였다. 둘째, 일반 실측용 무인항공기에 비해 가볍고 저렴한 multicopter와 디지털카메라를 이용하여 촬영의 기동성과 경제성을 확인하였으며, 촬영된 사진데이터의 정합과 DEM, DXF파일의 추출을 통해 수치지형도 보다 정밀한 지형분석이 가능하여 multicopter를 이용한 지형실측의 가능성을 확인하였다. 셋째, 하천내부에 대한 고해상 정사영상사진(20Cm급)을 제작함으로써 하천변일대에 대한 식생과 지형의 변화 등에 대한 분석이 가능한 것을 확인하였다. 또한 촬영지점의 GPS좌표에 대한 데이터베이스를 통해 미세지형의 변화 등과 같은 경관변화와 하천변 일대 또는 수림지 등에 대한 식생변화 등을 지속적으로 모니터링 할 수 있는 기반이 마련 될 수 있을 것으로 판단된다. 넷째, 정사영상분석을 통해 만들어진 DEM은 지형분석 및 가시권 분석 등과 같은 경관분석에서 보다 심도 있는 연구에 활용될 수 있을 것이다. 특히 현재 정부에서 추진 중인 '3차원 국토공간 정보 구축사업'과 연계하여 역사문화자원에 대한 3차원 지형정보 제공 등에도 널리 활용 될 수 있을 것으로 판단된다. 본 연구는 UAV를 이용한 지형분석 및 활용방안에 대한 연구로 도시 및 하천 등 다양한 지형에 대한 분석이 가능할 뿐만 아니라 사적 및 명승 등의 경관관리에 대한 연구와 DSM구축에 따른 가시권 분석 등의 역사문화자원에 대한 관리에도 폭넓게 활용 될 수 있을 것으로 판단된다.

태양열집열송풍(太陽熱集熱送風), 곡물순환식(穀物循環式) 건조기(乾燥機)의 벼 건조효과(乾燥效果) (Effect of Paddy Drying by Solar Energy Concentration Blast-Grain Circulation Dryer)

  • 이병영;김영배;손종록;윤인화;한판주
    • Applied Biological Chemistry
    • /
    • 제32권2호
    • /
    • pp.104-108
    • /
    • 1989
  • 미곡(米穀)의 안전건조(安全乾燥)와 건조시간(乾燥時間)을 단축(短縮)시킬 수 있는 건조기(乾燥機)를 개발(開發)하기 위하여 2.5ton 규모(規模)의 태양열집열송풍(太陽熱集熱送風), 곡물순환식(穀物循環式), 건조기(乾燥機)를 제작(製作)하여 상온송풍식(常溫送風式)과 비교(比較) 시험(試驗)을 실시(實施)한 결과(結果)는 다음과 같다. 1. 태양열집열송풍(太陽熱集熱送風), 곡물순환식(穀物循環式) 건조기(乾燥機)에 송풍(送風)되는 공기(空氣)의 온도(溫度)는 외기온도(外氣溫度) 및 상온송기식(常溫送氣式) 건조기(乾燥機)에 송풍(送風)되는 공기(空氣)의 온도(溫度) 보다 $4{\sim}5^{\circ}C$ 높았다. 2. 벼 건조기간중(乾燥期間中) 건조기내(乾燥機內)의 부위별(部位別) 수분함량(水分含量)은 상온송풍식(常溫送風式) 건조기내(乾燥機內)에서는 차(差)가 극심하였으나 태양열집열송풍(太陽熱集熱送風), 곡물순환식(穀物循環式) 건조기내(乾燥機內)에서는 차(差)가 거의 없었다. 3. 수분함량(水分含量) 24%의 벼를 15%까지 건조(乾燥)시키는데 상온송풍(常溫送風) 건조(乾燥)로는 14일(日) 정도(程度) 소요(所要)되었으나 태양열집열송풍(太陽熱集熱送風), 곡물순환식(穀物循環式) 건조기(乾燥機)로는 3일(日) 정도(程度) 소요(所要)되었다. 4. 상온송풍(常溫送風) 건조기(乾燥機)로 건조(乾燥)한 벼의 동할립율(胴割粒率)은 상부(上部), 중부(中部), 하부(下部)가 각각 6, 6 및 12%로 건조기내(乾燥機內)의 부위별(部位別)로 차(差)가 있었으나 태양열집열송풍(太陽熱集熱送風), 곡물순환식(穀物循環式) 건조기(乾燥機)로 건조(乾燥)한 벼는 모든 부위(部位)가 7%로 부위별(部位別)로 차(差)가 없었다. 5. 벼 건조기간(乾燥期間) 중(中) 에너지 (energy) 소요량(所要量)은 상온송풍식(常溫送風式) 건조기(乾燥機)는 108Kw/2.5ton인데 비(比)하여 태양열집열송풍(太陽熱集熱送風), 곡물순환식(穀物循環式) 건조기(乾燥機)는 28.8Kw/2.5ton이었다.

  • PDF

Polyethylene film포장(包裝)에 의(依)한 단감의 CA저장(貯藏)에 관(關)한 연구(硏究) (Studies on the CA Storage of Sweet Persimmon in Polyethylene Film Pack)

  • 민병용;오상용
    • 한국식품과학회지
    • /
    • 제7권3호
    • /
    • pp.128-134
    • /
    • 1975
  • polyethylene필립포장(包裝)에 의(依)한 단감의 장기냉장법(長期冷藏法) 개발(開發)을 위하여 1973년도(年度)에는 30상자(箱子)의 단감을 공시(共試)하여 기초연구시험(基礎硏究試驗)을 실시(實施)하고 하여 1974년도(年度)에는 진영(進永)단감협동조합(協同組合)의 50평(平)짜리 냉장고(冷藏庫)에 2,500상자(箱子)의 경제규모(經濟規模)의 실용화(實用化) 시험(試驗)을 실시(實施)하여 저장기간별(貯藏期間別)로 품질변화(品質變化) 상태(狀態)를 조사(調査)하는 동시(同時) 단계적(段階的)으로 저장(貯藏)단감을 출하(出荷)하여 시판(市販)하므로서 소비자(消費者)의 반응(反應)과 단감저장(貯藏)의 기업성(企業性)을 검토(檢討)하여 다음과 같은 결론(結論)을 얻었다. (1) 김해진영산(金海進永産) 단감 부유(富有)는 $2^{\circ}C{\pm}1^{\circ}C$에서 냉장(冷臧)하면 1개월간(個月間)을 저장(貯藏)이 가능(可能)하였고 PE필림으로 밀봉포장(密封包裝)했을때는 저장기간(貯藏期間)을 크게 연장(延長)할 수 있었으며 이때 포장(包裝) PE필림의 두께가 0.08mm와 0.1mm일때는 다음해 2월말일(月末日)까지 약(約) 4개월간(個月間)을 안전(安全)하게 저장(貯藏)할 수 있었다. (2) PE필림 밀봉포장(密封包裝)으로 단감의 저장중(貯藏中) 증산(蒸散)에 의(依)한 중량감소(重量減少)를 크게 억제(抑制)할 수 있었으며 필림두께가 0.04mm이상(以上)일때 그 효과(效果)가 뚜렷하게 나타났다. (3) 과실(果實)을 필림대(袋)속에 $3{\sim}5$개씩 넣어 소포장(小包裝)는 것이 한상자분(箱子分)(15kg)을 큰 필림포대(包袋)에 넣어 밀봉포장(密封包裝)한 것에 비(比)하여 저장성(貯藏性)이 다소(多少)좋았다. (4) 필림포장내(包裝內)의 $CO_2$축적량(畜積量)은 필림의 두께가 두꺼울수록 증가(增加)하나 저장(貯藏) 1개월후(個月後)부터는 극(極)히 완만(緩慢)한 증가(增加)를 보였으며 0.06mm와 0.08mm포장구(包裝區)에서는 대체(大體)로 $5{\sim}6%$선(線)을 유지(維持)하였다. (5) 단감은 저장중(貯藏中) 전당(全糖), 총산(總酸) 및 Vitamin C는 다같이 감소(減少)하였으며 그중(中) 특(特)히 무포장구(無包裝區)의 과실(果實)에서 현저(顯著)하였다. (6) PE필림 밀봉포장(密封包裝) 냉장(冷藏)단감은 출고후(出庫後) 필림포장(包裝)한 그대로 유통(流通)시키는 것이 포장(包裝)을 제거(除去)한 것보다 품위유지(品位維持)에 유리(有利)하였으며 외기상온(外氣常溫)에서 10일간(日間)은 무난(無難)하게 상품적(商品的) 가치(價値)를 보지(保持)할 수 있었다. (7) 단감의 필림포장냉장(包裝冷藏)은 시장성(市場性)이 좋고 경제적규모(經濟的規模)로 냉장(冷藏)했을때 제반경비(諸般經費)를 공제(控除)하고도 기업성(企業性)이 인정(認定)되었다.

  • PDF

비순환식 양액재배에서 발생하는 폐양액, 폐배지, 폐작물이 환경에 미치는 영향 (Environmental impact of hydroponic nutrient wastewater, used hydroponic growing media, and crop wastes from acyclic hydroponic farming system)

  • 박병록;조홍목;김민상
    • 유기물자원화
    • /
    • 제29권1호
    • /
    • pp.19-27
    • /
    • 2021
  • 양액재배는 기존 비닐하우스 안의 토양재배 방식에서 물이나 배지에 작물을 심고 생육에 필요한 양분(비료)을 녹인 양액을 공급하여 재배하는 방식으로 기존 시설재배 방식에서 영농기술이 발전하여 양액재배는 작물의 생산성을 극대화할 수 있는 큰 장점을 가지고 있다. 본 연구는 폐양액이 다량의 비료 물질을 함유하고 있기에 하천으로 유입되면 인근 하천을 오염시키며, 양액재배에 사용되고 폐기되는 폐배지, 폐작물의 처리에 대한 문제점을 제시하고 있다. 또한, 처리시 처리비용의 발생과 현재 국내 양액재배 농장의 대부분이 비순환식 양액재배 시스템을 사용하여 배출되는 양액의 잔여비료로 인한 환경오염 및 비료의 불필요한 과다 사용 문제점을 지적하는 선행연구를 바탕으로 사전조사와 실험을 진행하였다. 현재 양약재배 비순환식 시스템 재배방식 농장에서 발생하는 폐양액, 폐배지, 폐작물이 농장 주변 환경에 미치는 영향을 수질, 토양분석 결과 수치를 통해 규명하고자 현장자료 연구를 진행하였다. 현장 수질, 토양분석을 위해서 지역별 양액재배 5개 농가의 작형, 양액재배 시스템를 확인하였으며, 강원 C지역 토경재배 3개 농장의 작형, 양액재배 시스템 농장 현장을 방문하여 농장의 시설내·외부 수질, 토양 샘플을 채취하였다. 추가적으로 폐작물 야적지에서 발생되는 침출수 및 토양샘플을 채취하여 수질, 토양분석을 하였다. 연구 결과 비순환식 시스템 재배방식 농장에서 발생되는 폐양액의 평균 total nitrogen(TN) 농도는 402 mg/L 이였고, total phosphate(TP)의 경우 77.4mg/L 이였으며, 이는 환경정책기본법 시행령상 하천의 생활환경 TP기준 993.7배 초과한 수치였다. 또한, 물환경보전법의 산업폐수 배출기준 TN기준 6~19배, TP기준 2~27배 초과한 수치결과를 확인하였다. 폐작물 야적지에서 발생된 침출수의 경우 환경정책기본법 시행령상 하천의 생활환경 COD 기준 11,828배 초과, TP기준 395~2663배 초과한 수치이며, 물환경보전법의 산업폐수 배출기준 TN기준 788배, TP기준 5배 초과한 수치결과를 확인하였다. 비순환식 양액재배에서 발생하는 폐양액, 폐배지, 폐작물이 환경에 미치는 영향에 대한 더 정밀한 연구를 위해 전국 양액재배 농가수(호), 재배면적(ha)를 기준으로 하여 양액재배면적이 넓은 지역 도출해내어야 한다. 이를 통해 넓을 지역의 양액재배 시설 주변 소하천을 중심으로 계절적 요인, 기후 요인, 날씨 요인, 재배면적, 재배지역, 농가 재배특성 등의 다양한 요인을 고려한 수질 및 토양 샘플링 채취와 분석에 관한 추가 연구가 필요할 것으로 판단된다.

조사로봇의 재난현장 활용을 위한 다중센서모듈 개발 및 성능평가에 관한 연구 (Development and Performance Evaluation of Multi-sensor Module for Use in Disaster Sites of Mobile Robot)

  • 정용한;홍준우;한수희;신동윤;임언택;김성삼
    • 대한원격탐사학회지
    • /
    • 제38권6_3호
    • /
    • pp.1827-1836
    • /
    • 2022
  • 재난은 돌발적으로 발생하여 예측하기가 쉽지 않고 그 규모도 과거에 비해 커지고 있어 피해가 증가하고 있으며, 하나의 재난이 2차 재난으로 발전하는 경우가 많다. 재난관리의 4가지 단계 중 응급상황이 발생하는 대응단계에서 행해지는 수색과 구조 과정에서, 현장에 투입되는 인원들은 많은 위험을 감수하고 현장에 투입되고 있다. 이러한 점에서 로봇은 재난현장의 초기 대응과정에서 인명 및 재산의 피해를 줄일 수 있는 가능성이 높은 기술이다. 또한, Light Detection And Ranging (LiDAR)는 레이저를 이용하여 비교적 넓은 범위의 3차원 정보를 획득하고 정확도 및 정밀도가 높아 재난 현장의 특징을 생각할 때 매우 유용한 센서이다. 이에 본 연구에서는 로봇이 재난 현장에서 활용될 수 있도록 LiDAR와 Inertial Measurement Unit (IMU) 센서에 실시간 모니터링을 위한 컴퓨팅 보드를 결합하여 하나의 다중센서모듈 및 조사로봇 맞춤형 Simultaneous Localization and Mapping (SLAM) 알고리즘을 개발하였다. 다중센서모듈이 재난 현장에서 최적의 정확도를 유지할 수 있도록 조사로봇에 안정적으로 탑재하는 방안에 대해 연구하였고, 모듈의 성능을 확인하기 위해 재난건축물 실내에서 SLAM 맵핑을 수행하여 다양한 SLAM알고리즘과 거리 비교를 수행하였다. 그 결과, 본 연구에서 개발한 PackSLAM이 낮은 오차를 나타내어 활용 가능성을 보였다. 향후 재난현장에서의 적용성을 더욱 높이기 위해 장애물이 많은 험지환경을 구축하여 다양한 실험을 수행할 예정이다.

Computer Aided Innovation 역량이 연구개발역량에 미치는 효과: 국내 중소기업을 대상으로 (The Effects of the Computer Aided Innovation Capabilities on the R&D Capabilities: Focusing on the SMEs of Korea)

  • 심재억;변무장;문효곤;오재인
    • Asia pacific journal of information systems
    • /
    • 제23권3호
    • /
    • pp.25-53
    • /
    • 2013
  • This study analyzes the effect of Computer Aided Innovation (CAI) to improve R&D Capabilities empirically. Survey was distributed by e-mail and Google Docs, targeting CTO of 235 SMEs. 142 surveys were returned back (rate of return 60.4%) from companies. Survey results from 119 companies (83.8%) which are effective samples except no-response, insincere response, estimated value, etc. were used for statistics analysis. Companies with less than 50billion KRW sales of entire researched companies occupy 76.5% in terms of sample traits. Companies with less than 300 employees occupy 83.2%. In terms of the type of company business Partners (called 'partners with big companies' hereunder) who work with big companies for business occupy 68.1%. SMEs based on their own business (called 'independent small companies') appear to occupy 31.9%. The present status of holding IT system according to traits of company business was classified into partners with big companies versus independent SMEs. The present status of ERP is 18.5% to 34.5%. QMS is 11.8% to 9.2%. And PLM (Product Life-cycle Management) is 6.7% to 2.5%. The holding of 3D CAD is 47.1% to 21%. IT system-holding and its application of independent SMEs seemed very vulnerable, compared with partner companies of big companies. This study is comprised of IT infra and IT Utilization as CAI capacity factors which are independent variables. factors of R&D capabilities which are independent variables are organization capability, process capability, HR capability, technology-accumulating capability, and internal/external collaboration capability. The highest average value of variables was 4.24 in organization capability 2. The lowest average value was 3.01 in IT infra which makes users access to data and information in other areas and use them with ease when required during new product development. It seems that the inferior environment of IT infra of general SMEs is reflected in CAI itself. In order to review the validity used to measure variables, Factors have been analyzed. 7 factors which have over 1.0 pure value of their dependent and independent variables were extracted. These factors appear to explain 71.167% in total of total variances. From the result of factor analysis about measurable variables in this study, reliability of each item was checked by Cronbach's Alpha coefficient. All measurable factors at least over 0.611 seemed to acquire reliability. Next, correlation has been done to explain certain phenomenon by correlation analysis between variables. As R&D capabilities factors which are arranged as dependent variables, organization capability, process capability, HR capability, technology-accumulating capability, and internal/external collaboration capability turned out that they acquire significant correlation at 99% reliability level in all variables of IT infra and IT Utilization which are independent variables. In addition, correlation coefficient between each factor is less than 0.8, which proves that the validity of this study judgement has been acquired. The pair with the highest coefficient had 0.628 for IT utilization and technology-accumulating capability. Regression model which can estimate independent variables was used in this study under the hypothesis that there is linear relation between independent variables and dependent variables so as to identify CAI capability's impact factors on R&D. The total explanations of IT infra among CAI capability for independent variables such as organization capability, process capability, human resources capability, technology-accumulating capability, and collaboration capability are 10.3%, 7%, 11.9%, 30.9%, and 10.5% respectively. IT Utilization exposes comprehensively low explanatory capability with 12.4%, 5.9%, 11.1%, 38.9%, and 13.4% for organization capability, process capability, human resources capability, technology-accumulating capability, and collaboration capability respectively. However, both factors of independent variables expose very high explanatory capability relatively for technology-accumulating capability among independent variable. Regression formula which is comprised of independent variables and dependent variables are all significant (P<0.005). The suitability of regression model seems high. When the results of test for dependent variables and independent variables are estimated, the hypothesis of 10 different factors appeared all significant in regression analysis model coefficient (P<0.01) which is estimated to affect in the hypothesis. As a result of liner regression analysis between two independent variables drawn by influence factor analysis for R&D capability and R&D capability. IT infra and IT Utilization which are CAI capability factors has positive correlation to organization capability, process capability, human resources capability, technology-accumulating capability, and collaboration capability with inside and outside which are dependent variables, R&D capability factors. It was identified as a significant factor which affects R&D capability. However, considering adjustable variables, a big gap is found, compared to entire company. First of all, in case of partner companies with big companies, in IT infra as CAI capability, organization capability, process capability, human resources capability, and technology capability out of R&D capacities seems to have positive correlation. However, collaboration capability appeared insignificance. IT utilization which is a CAI capability factor seemed to have positive relation to organization capability, process capability, human resources capability, and internal/external collaboration capability just as those of entire companies. Next, by analyzing independent types of SMEs as an adjustable variable, very different results were found from those of entire companies or partner companies with big companies. First of all, all factors in IT infra except technology-accumulating capability were rejected. IT utilization was rejected except technology-accumulating capability and collaboration capability. Comprehending the above adjustable variables, the following results were drawn in this study. First, in case of big companies or partner companies with big companies, IT infra and IT utilization affect improving R&D Capabilities positively. It was because most of big companies encourage innovation by using IT utilization and IT infra building over certain level to their partner companies. Second, in all companies, IT infra and IT utilization as CAI capability affect improving technology-accumulating capability positively at least as R&D capability factor. The most of factor explanation is low at around 10%. However, technology-accumulating capability is rather high around 25.6% to 38.4%. It was found that CAI capability contributes to technology-accumulating capability highly. Companies shouldn't consider IT infra and IT utilization as a simple product developing tool in R&D section. However, they have to consider to use them as a management innovating strategy tool which proceeds entire-company management innovation centered in new product development. Not only the improvement of technology-accumulating capability in department of R&D. Centered in new product development, it has to be used as original management innovative strategy which proceeds entire company management innovation. It suggests that it can be a method to improve technology-accumulating capability in R&D section and Dynamic capability to acquire sustainable competitive advantage.

단위유량도와 비수갑문 단면 및 방조제 축조곡선 결정을 위한 조속계산 (Calculation of Unit Hydrograph from Discharge Curve, Determination of Sluice Dimension and Tidal Computation for Determination of the Closure curve)

  • 최귀열
    • 한국농공학회지
    • /
    • 제7권1호
    • /
    • pp.861-876
    • /
    • 1965
  • During my stay in the Netherlands, I have studied the following, primarily in relation to the Mokpo Yong-san project which had been studied by the NEDECO for a feasibility report. 1. Unit hydrograph at Naju There are many ways to make unit hydrograph, but I want explain here to make unit hydrograph from the- actual run of curve at Naju. A discharge curve made from one rain storm depends on rainfall intensity per houre After finriing hydrograph every two hours, we will get two-hour unit hydrograph to devide each ordinate of the two-hour hydrograph by the rainfall intensity. I have used one storm from June 24 to June 26, 1963, recording a rainfall intensity of average 9. 4 mm per hour for 12 hours. If several rain gage stations had already been established in the catchment area. above Naju prior to this storm, I could have gathered accurate data on rainfall intensity throughout the catchment area. As it was, I used I the automatic rain gage record of the Mokpo I moteorological station to determine the rainfall lntensity. In order. to develop the unit ~Ydrograph at Naju, I subtracted the basic flow from the total runoff flow. I also tried to keed the difference between the calculated discharge amount and the measured discharge less than 1O~ The discharge period. of an unit graph depends on the length of the catchment area. 2. Determination of sluice dimension Acoording to principles of design presently used in our country, a one-day storm with a frequency of 20 years must be discharged in 8 hours. These design criteria are not adequate, and several dams have washed out in the past years. The design of the spillway and sluice dimensions must be based on the maximun peak discharge flowing into the reservoir to avoid crop and structure damages. The total flow into the reservoir is the summation of flow described by the Mokpo hydrograph, the basic flow from all the catchment areas and the rainfall on the reservoir area. To calculate the amount of water discharged through the sluiceCper half hour), the average head during that interval must be known. This can be calculated from the known water level outside the sluiceCdetermined by the tide) and from an estimated water level inside the reservoir at the end of each time interval. The total amount of water discharged through the sluice can be calculated from this average head, the time interval and the cross-sectional area of' the sluice. From the inflow into the .reservoir and the outflow through the sluice gates I calculated the change in the volume of water stored in the reservoir at half-hour intervals. From the stored volume of water and the known storage capacity of the reservoir, I was able to calculate the water level in the reservoir. The Calculated water level in the reservoir must be the same as the estimated water level. Mean stand tide will be adequate to use for determining the sluice dimension because spring tide is worse case and neap tide is best condition for the I result of the calculatio 3. Tidal computation for determination of the closure curve. During the construction of a dam, whether by building up of a succession of horizontael layers or by building in from both sides, the velocity of the water flowinii through the closing gapwill increase, because of the gradual decrease in the cross sectional area of the gap. 1 calculated the . velocities in the closing gap during flood and ebb for the first mentioned method of construction until the cross-sectional area has been reduced to about 25% of the original area, the change in tidal movement within the reservoir being negligible. Up to that point, the increase of the velocity is more or less hyperbolic. During the closing of the last 25 % of the gap, less water can flow out of the reservoir. This causes a rise of the mean water level of the reservoir. The difference in hydraulic head is then no longer negligible and must be taken into account. When, during the course of construction. the submerged weir become a free weir the critical flow occurs. The critical flow is that point, during either ebb or flood, at which the velocity reaches a maximum. When the dam is raised further. the velocity decreases because of the decrease\ulcorner in the height of the water above the weir. The calculation of the currents and velocities for a stage in the closure of the final gap is done in the following manner; Using an average tide with a neglible daily quantity, I estimated the water level on the pustream side of. the dam (inner water level). I determined the current through the gap for each hour by multiplying the storage area by the increment of the rise in water level. The velocity at a given moment can be determined from the calcalated current in m3/sec, and the cross-sectional area at that moment. At the same time from the difference between inner water level and tidal level (outer water level) the velocity can be calculated with the formula $h= \frac{V^2}{2g}$ and must be equal to the velocity detertnined from the current. If there is a difference in velocity, a new estimate of the inner water level must be made and entire procedure should be repeated. When the higher water level is equal to or more than 2/3 times the difference between the lower water level and the crest of the dam, we speak of a "free weir." The flow over the weir is then dependent upon the higher water level and not on the difference between high and low water levels. When the weir is "submerged", that is, the higher water level is less than 2/3 times the difference between the lower water and the crest of the dam, the difference between the high and low levels being decisive. The free weir normally occurs first during ebb, and is due to. the fact that mean level in the estuary is higher than the mean level of . the tide in building dams with barges the maximum velocity in the closing gap may not be more than 3m/sec. As the maximum velocities are higher than this limit we must use other construction methods in closing the gap. This can be done by dump-cars from each side or by using a cable way.e or by using a cable way.

  • PDF

딥러닝 오픈소스 프레임워크의 사례연구를 통한 도입 전략 도출 (Deriving adoption strategies of deep learning open source framework through case studies)

  • 최은주;이준영;한인구
    • 지능정보연구
    • /
    • 제26권4호
    • /
    • pp.27-65
    • /
    • 2020
  • 많은 정보통신기술 기업들은 자체적으로 개발한 인공지능 기술을 오픈소스로 공개하였다. 예를 들어, 구글의 TensorFlow, 페이스북의 PyTorch, 마이크로소프트의 CNTK 등 여러 기업들은 자신들의 인공지능 기술들을 공개하고 있다. 이처럼 대중에게 딥러닝 오픈소스 소프트웨어를 공개함으로써 개발자 커뮤니티와의 관계와 인공지능 생태계를 강화하고, 사용자들의 실험, 적용, 개선을 얻을 수 있다. 이에 따라 머신러닝 분야는 급속히 성장하고 있고, 개발자들 또한 여러가지 학습 알고리즘을 재생산하여 각 영역에 활용하고 있다. 하지만 오픈소스 소프트웨어에 대한 다양한 분석들이 이루어진 데 반해, 실제 산업현장에서 딥러닝 오픈소스 소프트웨어를 개발하거나 활용하는데 유용한 연구 결과는 미흡한 실정이다. 따라서 본 연구에서는 딥러닝 프레임워크 사례연구를 통해 해당 프레임워크의 도입 전략을 도출하고자 한다. 기술-조직-환경 프레임워크를 기반으로 기존의 오픈 소스 소프트웨어 도입과 관련된 연구들을 리뷰하고, 이를 바탕으로 두 기업의 성공 사례와 한 기업의 실패 사례를 포함한 총 3 가지 기업의 도입 사례 분석을 통해 딥러닝 프레임워크 도입을 위한 중요한 5가지 성공 요인을 도출하였다: 팀 내 개발자의 지식과 전문성, 하드웨어(GPU) 환경, 데이터 전사 협력 체계, 딥러닝 프레임워크 플랫폼, 딥러닝 프레임워크 도구 서비스. 그리고 도출한 성공 요인을 실현하기 위한 딥러닝 프레임워크의 단계적 도입 전략을 제안하였다: 프로젝트 문제 정의, 딥러닝 방법론이 적합한 기법인지 확인, 딥러닝 프레임워크가 적합한 도구인지 확인, 기업의 딥러닝 프레임워크 사용, 기업의 딥러닝 프레임워크 확산. 본 연구를 통해 각 산업과 사업의 니즈에 따라, 딥러닝 프레임워크를 개발하거나 활용하고자 하는 기업에게 전략적인 시사점을 제공할 수 있을 것이라 기대된다.

PET/CT에서 재구성 프로그램의 성능 평가 (Evaluation of Image Quality Based on Time of Flight in PET/CT)

  • 임정진;윤석환;김종필;남궁식;신성화;윤상혁;김영석;이형진;이홍재;김진의;우재룡
    • 핵의학기술
    • /
    • 제16권2호
    • /
    • pp.110-114
    • /
    • 2012
  • 암의 조기검진 및 수술 전후 추적검사에 유용하게 이용되고 있는 PET/CT는 영상의 질을 향상시키기 위하여 기계적인 성능 향상과 더불어 영상 재구성방법도 발전되어 왔다. 본 연구는 Time of Flight (TOF)를 기반으로 한 재구성 프로그램들에 대하여 영상의 질을 평가하고자 한다. Gemini TF, Biograph mCT, Discovery 690을 이용하여 phantom 영상을 동일한 조건으로 2분 동안 영상을 획득 후 Astonish TF, ultraHD PET, SharpIR을 적용한 것과 적용하지 않은 것에 대하여 영상을 재구성하였다. Flangeless Esser PET phantom 의 내부에는 $^{18}F$-FDG 1.11 kBq/ml (30 ${\mu}Ci/ml$)를 채우고 4개의 열소 원통(8, 12, 16, 25 mm)에는 8.88 kBq/ml (240 ${\mu}Ci/ml$)를 채워서 배후 방사능과 열소 원통 방사능의 비율이 1:8이 되도록 제작하였고 triple line phantom의 내부에는 $^{18}F$-FDG 37 MBq (1 mCi)를 채우고 세 개의 line에는 0.37 MBq/ml (100 uCi)를 주입하여 제작하였다. Flangeless Esser PET phantom을 사용한 재구성 영상에서 contrast ratio와 background variability를 구하였고, triple line phantom을 사용한 재구성 영상에서 resolution을 측정하였다. Phantom lid 크기가 8, 12, 16, 25 mm에서의 contrast ratio는 Astonish TF를 적용하지 않은 영상에서 8.69, 12.28, 19.31, 25.80%, 적용한 영상에서는 6.24, 13.24, 19.55, 27.60%, ultraHD PET를 적용하지 않은 영상에서 4.94, 12.68, 22.09, 30.14%, 적용한 영상에서는 4.76, 13.23, 23.72, 31.65%, SharpIR를 적용하지 않은 영상에서 13.18, 17.44, 28.76, 34.67%, 적용한 영상에서는 13.15, 18.32, 30.33, 35.73%로 나타났다. Background variability는 Astonish TF를 적용하지 않은 영상에서 5.51, 5.42, 7.13, 6.28%, 적용한 영상에서는 7.81, 7.94, 6.40, 6.28%, ultraHD PET를 적용하지 않은 영상에서 6.46, 6.63, 5.33, 5.21%, 적용한 영상에서는 6.08, 6.08, 4.45, 4.58%, SharpIR를 적용하지 않은 영상에서 5.93, 4.82, 4.45, 5.09%, 적용한 영상에서는 4.80, 3.92, 3.63, 4.50%로 나타났다. Phantom line 위치가 upper, center, right에서의 resolution은 Astonish TF를 적용하지 않은 영상에서 10.77, 11.54, 9.34 mm, 적용한 영상에서는 9.54, 8.90, 8.88 mm, ultraHD PET를 적용하지 않은 영상에서 7.84, 6.95, 8.32 mm, 적용한 영상에서는 7.51, 6.66, 8.27 mm, SharpIR를 적용하지 않은 영상에서 9.35, 8.69, 8.99 mm, 적용한 영상에서는 9.88, 9.18, 9.00 mm로 나타났다. TOF를 기반으로 하여 영상의 질을 향상시키기 위한 재구성 프로그램 사용 시 전반적으로 영상의 질적 향상이 이루어짐을 알 수 있었다. 또한 제조사별 재구성 프로그램 비교에 대해서는 어느 정도의 결과 값의 차이를 보였지만 이는 제조사별 장비의 특성과 재구성 알고리즘의 차이로 인한 결과라고 생각된다. 따라서 각 병원에서는 영상의 질을 향상시키기 위해 사용되는 재구성 프로그램을 이용함에 있어서 프로그램에 맞는 적절한 재구성 조건을 찾기 위한 추가적인 연구가 필요할 것으로 사료된다.

  • PDF

한국 민간경비 실태 및 발전방안 (Developmental Plans and Research on Private Security in Korea)

  • 김태환;박옥철
    • 시큐리티연구
    • /
    • 제9호
    • /
    • pp.69-98
    • /
    • 2005
  • 한국의 민간경비산업은 1960년대 초 미군부대의 용역경비를 실시함으로써 시작되었다. 이후 1973년 청원경찰법이 제정되었고, 1976년 용역경비업법(현 경비업법)이 제정됨으로써 민간경비산업이 조금씩 성장하기 시작하였다. 1980년대 초 외국기술과 자본의 도입으로 민간경비산업은 급속한 성장을 하였고, 현재 2000여개가 넘는 민간경비업체들이 있다. 하지만 이러한 업체들 중 상당수의 업체들이 부실경영과 자본력의 압박, 인력관리능력부족 등으로 인하여 인프라를 구축하지 못하고 파산하거나 영세성을 면치 못하고 있다. 그리고 이들 업체들은 치열한 민간경비시장에서 생존하기 위하여 과다한 덤핑행위와 위${\cdot}$탈법을 저지르거나 자격조건에 맞지 않는 인력채용 등으로 민간경비시장을 어지럽히고 있다. 또한 민간경비업체의 허가요건을 갖추기가 너무 용이하다보니 업계의 진${\cdot}$출입이 손쉽게 이루어진다. 이러한 모든 문제점이 피드백을 이루면서 민간경비시장의 질적 발전을 저해하고 있다 .이에 본 연구자는 한국민간경비산업의 현황을 분석하고, 이에 따르는 문제점을 도출하여 미국, 일본의 민간경비를 바탕으로 한국민간경비산업에 대한 적절한 발전방안을 제시하고자 한다. 본 연구에 따르면, 현재 한국 민간경비는 법적${\cdot}$제도적 측면, 경영적 측면, 학문연구적 측면, 마지막으로 관련기관의 문제점을 해결해야만 한다. 이러한 문제점들은 법의 일원화, 자격증제도의 도입, 체계화된 경영전략, 관련기관의 상호협력 등이 원활하게 이루어지면서 해결될 것이며, 한국 민간경비는 더욱 발전할 것으로 전망된다.렛 장애 환아군에서 유의하게 높음이 관찰되었다. 그러나 TDT에서는 유의한 차이가 관찰되지 않았다. 또 뚜렛 장애 환아군의 세 가지 서로 다른 유전형 사이에 틱 장애의 가족력, 주의력결핍 과잉행동장애, 강박증, 약물에 대한 반응, 공존 질환 여부 등에 있어서 유의한 차이는 없었다. 결 론:본 연구에 있어 사례 수가 적고 TDT에서 유의한 결과가 발견되지 않았기 때문에 해석에 조심을 기할 필요는 있겠으나, 본 연구는 COMT유전자의 기능적 다형성과 뚜렛 장애 간에 연관 관계가 있음을 밝혀 낸 최초의 보고라 하겠다.산수, 토막짜기 점수도 유의하게 높았다. 약물치료력에 있어서는 임상가가 평가한 약물 반응이 순응군에서 유의하게 높았고, 약물 용량도 순응군이 유의하게 높았으며, 오후 약물 순응율(2003년 3월 평가)도 유의하게 순응군이 높았다. 또한 주치의의 지휘에 따라서도 순응율에 차이를 보였다. 결 론:국내에서는 최초로, 외래 치료를 받고 있는 ADHD 아동에 대한 MPH-IR 순응도를 조사하였다. 평균 1년 치료기간동안의 순응도는 62%로 외국에서의 연구결과와 유사하였으며, 지능이 높을 때, 약물반응이 우수하고, 약물용량이 높으며, 오후약물에 대한 순응이 초기에 높을 때 약물 순응률이 보다 높았다. 결국 약물치료 효과에 대한 만족도가 순응률 결정에 가장 중요한 요인이라고 생각되며, 약물치료효과를 높이기 위한 다양한 전략을 사용하여, 약물 순응도를 향상 시킬 필요가 있다고 생각된다.으나, 주의력에서는 전두엽의 실행능력(executive function)과 관련되는 검사들에서 산소흡입이 특이한 효과를 보여준다는 것이 확인되었고, 기억능력에서는 단기기억능력

  • PDF