• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.1
• /
• pp.90-97
• /
• 2024

In this study, we employed Highly Ductile Cement Composite (HDCC) to evaluate the flexural performance of a RC slab that simulates the laminating structure of a seashell. To evaluate flexural performance, we produced conventional RC slab specimens, HDCC slab specimens, and HDCC-M slab specimens which biomimics a seashell's layered structure by inserting PE mesh inside the slab made of HDCC. A series of 4-point bending tests were conducted. Experimental results shows the flexural strength of the HDCC-M slab specimen was 1.7 times and 1.2 times higher than that of the RC and HDCC slab specimens, respectively. Furthermore, the ductility was evaluated using the ratio of yield deflection to maximum deflection, and it was confirmed that the HDCC slab test specimen exhibited the best ductility. This is most likely due to the fact that the inserted PE mesh separates the layers and increases ductility, while the HDCC passing through the mesh prevents the loss of load carrying capacity due to layer separation.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.1
• /
• pp.165-173
• /
• 1997

The present study investigates heat/mass transfer for flow through perforated plates for application to combustor wall and turbine blade film cooling. The experiments are conducted for hole length to diameter ratios of 0.68 to 1.5, for hole pitch-to-diameter ratios of 1.5 and 3.0, for gap distance between two parallel perforated plates of 1 to 3 hole diameters, and for Reynolds numbers of 60 to 13, 700. Local heat/mass transfer coefficients near and inside the cooling holes are obtained using a naphthalene sublimation technique. Detailed knowledge of the local transfer coefficients is essential to analyze thermal stress in turbine components. The results indicate that the heat/mass transfer coefficients inside the hole surface vary significantly due to flow separation and reattachment. The transfer coefficient near the reattachment point is about four and half times that for a fully developed circular tube flow. The heat/mass transfer coefficient on the leeward surface has the same order as that on the windward surface because of a strong recirculation flow between neighboring jets from the array of holes. For flow through two perforated plate layers, the transfer coefficients on the target surface (windward surface of the second wall) affected by the gap spacing are approximately three to four times higher than that with a single layer.

• Journal of Convergence for Information Technology
• /
• v.8 no.1
• /
• pp.227-233
• /
• 2018

The purpose of this study was to develop a warm cover for greenhouse with excellent thermal insulation and to propose ways of commercialization of the product. Feathers were used as filling materials because they formed the air layer to enhance insulation. Instead of downs for clothing or other textile products, we used disposed feathers. The developed product covers the outside of the greenhouse to keep the crops warm. It has multiple layers including feathers as filling materials, padding, inside fabric, heat insulation materials and outer fabric. It has proven to improve the insulation ratio. We developed other kinds of warm covers that are applicable to the inside of the greenhouse or the small houses in the greenhouse. Also, R&D system of educational industrial complex enables us to commercialize the products and building marketing strategies for them. This technology contributes to the expansion of energy-saving facilities for farmers, and it can serve the development and spread of various products utilizing feather.

• Development and Reproduction
• /
• v.7 no.2
• /
• pp.89-93
• /
• 2003

The present study observed the ultrastructure of testis of bluespotted mud hopper(Boleophthalmus pectinirostris), and sperrnatogenesis was discussed also. The testis was surrounded by a thin adventitia, inside which spermatocyst composed the parenchyma of testis. Each lobule was enwrapped by many spermatocysts, which were filled with different kinds of spermatogenic cell clusters at the same developmental stage. In the lobule lumen there are large numbers of spermatozoa The thin adventitia(outer wall) of testis was composed of outer epithelium, and the underlying layers, such as collagen fiber layer, and myoid tissue. The myoid tissue elongated into the inside of testis, became the main componentof interstitium between spermatocyst where sperrnatogenesis occurred. In addition interstitial cells containing dense homogeneous nucleus and abundant mitochondria were observed. Spermatogonia contained round nucleus with diffuse chromatin and nucleolus, and dense nuclear bodies surround by mitochondria in cytoplasm. The synaptonemal . complex was observed in primary spermatocytes clearly. Early spermatid presented larger round nucleus composed of granular chromatin, which was located in the center of cytoplasm. The nucleus of mid-spermatid composed of finely granular chromatin lied on one side of spermatid, and abundant mitochondria had migrated another side. A nuclear fossa appeared in the site near mitochondria in late-spermatid, and the centriole was formed in nuclear fossa.

• Journal of Korea Water Resources Association
• /
• v.44 no.6
• /
• pp.439-447
• /
• 2011

This study aims to test the feasibility of combined use of EFDC (Environmental Fluid Dynamics Code) hydrodynamic model and WASP7.3 (Water Quality Analysis Program) model to improve accuracy of water quality predictions of the Yongdam Lake, Korea. The orthogonal curvilinear grid system was used for EFDC model to represent riverine shape of the study area. Relationship between volume, surface and elevation results were checked to verify if the grid system represents morphology of the lake properly. Monthly average boundary water quality conditions were estimated using the monthly monitored water quality data from Korean Ministry of Environment DB system. Monthly tributary flow rates were back-routed using dam discharge data and allocated in proportion to each basin area as direct measurements were not available. The optimum number of grid system was determined to be 372 horizontal cells and 10 vertical layers of the site for 1 year simulation of hydrodynamics and water quality out of iterative trials. Monthly observed BOD, TN, TP and Chl-a concentrations inside the lake were used for calibration of WASP7.3 model. This study shows that EFDC and WASP can be used in series successfully to improve accuracy in water quality modeling. However, it was observed that the amount of data to develop inflow water quality and flow rate boundary conditions and water quality data inside lake for calibration were not enough for accurate modeling. It is suggested that object-oriented data collection systems would be necessary to ensure accuracy of EFDC-WASP model application and thus for efficient lake water quality management strategy development.

• Advances in aircraft and spacecraft science
• /
• v.3 no.3
• /
• pp.351-366
• /
• 2016

Macroperforations improve the sound absorption performance of porous materials in acoustic cavities and in waveguides. In an acoustic cavity, enhanced noise reduction is achieved using porous materials having macroperforations. Double porosity materials are obtained by filling these macroperforations with different poroelastic materials having distinct physical properties. The locations of macroperforations in porous layers can be chosen based on cavity mode shapes. In this paper, the effect of variation of macroporosity and double porosity in porous materials on noise reduction in an acoustic cavity is presented. This analysis is done keeping each perforation size constant. Macroporosity of a porous material is the fraction of area covered by macro holes over the entire porous layer. The number of macroperforations decides macroporosity value. The system under investigation is an acoustic cavity having a layer of poroelastic material rigidly attached on one side and excited by an internal point source. The overall sound pressure level (SPL) inside the cavity coupled with porous layer is calculated using mixed displacement-pressure finite element formulation based on Biot-Allard theory. A 32 node, cubic polynomial brick element is used for discretization of both the cavity and the porous layer. The overall SPL in the cavity lined with porous layer is calculated for various macroporosities ranging from 0.05 to 0.4. The results show that variation in macroporosity of the porous layer affects the overall SPL inside the cavity. This variation in macroporosity is based on the cavity mode shapes. The optimum range of macroporosities in poroelastic layer is determined from this analysis. Next, SPL is calculated considering periodic and nodal line based optimum macroporosity. The corresponding results show that locations of macroperforations based on mode shapes of the acoustic cavity yield better noise reduction compared to those based on nodal lines or periodic macroperforations in poroelastic material layer. Finally, the effectiveness of double porosity materials in terms of overall sound pressure level, compared to equivolume double layer poroelastic materials is investigated; for this the double porosity material is obtained by filling the macroperforations based on mode shapes of the acoustic cavity.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.8 no.2
• /
• pp.95-101
• /
• 2022

Microfluidic radioimmunoassay (RIA) platform called µ-RIA spends less reagent and shorter reaction time for the analysis compared to the conventional tube-based radioimmunoassay. This study reported the design of µ-RIA chips optimized for the gamma counter which could measure the small samples of radioactive materials automatically. Compared with the previous study, the µ-RIA chips developed in this study were designed to be compatible with conventional RIA test tubes. And, the automatic gamma counter could detect radioactivity from the ¹²⁵I labeled anti-PSA attached to the chips. Effects of the multi-layer microchannels and two-phase flow in the µ-RIA chips were investigated in this study. The measured radioactivity from the ¹²⁵I labeled anti-PSA was linearly proportional to the number of stacked chips, representing that the radioactivity in µ-RIA platform could be amplified by designing the chips with multi-layers. In addition, we designed µ-RIA chip to generate liquid-gas plug flow inside the microfluidic channel. The plug flow can promote binding of the biomolecules onto the microfluidic channel surface with recirculation in the liquid phase. The ratio of liquid slug and air slug length was 1 : 1 when the ¹²⁵I labeled anti-PSA and the air were injected at 1 and 35 µL/min, respectively, exhibiting 1.6 times higher biomolecule attachment compared to the microfluidic chip without the air injection. This experimental result indicated that the biomolecular reaction was improved by generating liquid-gas slugs inside the microfluidic channel. In this study, we presented a novel µ-RIA chips that is compatible with the conventional gamma counter with automated sampler. Therefore, high-throughput radioimmunoassay can be carried out by the automatic measurement of radioactivity with reduced radiowaste generation. We expect the µ-RIA platform can successfully replace conventional tube-based radioimmunoassay in the future.

• Journal of Bio-Environment Control
• /
• v.3 no.2
• /
• pp.106-118
• /
• 1994

This study was conducted to analyze the effects of fluctuations in temperature, light intensity and soil temperature on the growth of red pepper seedlings in the nonheated plastic houses with various number of layers and in the open field. Relationship between the optimal environment and the growth of seedlings was discussed, and the maximum and minimum outdoor temperatures in Kwangju area from 1941 to 1985 were analyzed. The results obtained were as follows; 1. The minimum temperature in tunnel with quadruple coverings of P. E. film from December 20 to February 25 was decreased to 5$^{\circ}C$ mostly, where the exposure to chilling temperature could not be avoided during this period. The maximum temperature was increased to 33$^{\circ}C$ mostly and 42$^{\circ}C$ in peak, where some ventilation was needed. 2. The diurnal differences of inside temperature, increasing with number of layers, were 16 to 38$^{\circ}C$, while those of outside temperature were 5 to 1$0^{\circ}C$. 3. The cold injury in the quadruple coverings during winter occurred all the times below 12$^{\circ}C$ and as many as 200 times over 3$0^{\circ}C$, while effectiveness of thermal insulation in the multilayered nonheating plastic houses were clearly proved. 4. The inside light intensity was markedly reduced with the increment of layers and the minimum light intensity fallen down below the light compensation point for the growth of red pepper plants regardless of the number of layers. 5. Until 10 a. m., the temperature in the daytime during December 20 to mid - February showed below 10 to 12$^{\circ}C$ which was the limiting temperature for the growth of red pepper seedlings. After 4 p. m., the light intensity was sharply reduced despite of the air temperature kept over 12$^{\circ}C$. Therefore, limiting factors for the growth of red pepper seedlings were the temperature before 10 a. m. and the light intensity after 4 p. m. 6. The minimum soil temperature in quadruple coverings showed around 1$0^{\circ}C$ where the physiological damage for red pepper seedlings might be occurred. 7. The minimum outdoor temperatures from 1941 to 1985 was -19.4$^{\circ}C$, observed in the 5th January.

• Journal of Embryo Transfer
• /
• v.24 no.3
• /
• pp.159-167
• /
• 2009

Ultrasonographic examination was performed to observe the ultrasonographic image of Korean native cows' normal uterus in condition of in vitro and in vivo. The experiment was done 28 slaughtered cows' uterus using immersed in water in vitro, and 41 healthy breeding cows taken rectal ultrasonography in vivo. Ultrasonographic examination of uterine was taken on the reference of cross section of intercornual ligaments' cranial. Each uterus on the experiments was compared by estrous cycle and ultrasonographic frequency. The uterine structure using ultrasonography was 5 layers of uterine horn in vivo as well as in vitro. Uterine horn was observed to be distinguished from inside to outside as endometrium to inner echogenic layer, circular muscle layer to slightly echogenic elliptical layer, stratum vasculare to central echogenic layer, longitudinal muscle layer to slightly echogenic arched layer, and perimetrium to outer echogenic layer, respectively. According to the observation of uterus related to estrous cycle and ultrasonographic examination, uterine endometrium in vitro was constantly founded irrespective of estrous cycle and ultrasonographic frequency. On the low frequency, endometrium and circular muscle layer in estrus were prone to distinguished than in diestrus. On the high frequency, endometrium and circular muscle layer were always distinguished regardless of estrous cycle. In vivo, uterine endometrium and circular muscle layer were observed regardless of estrus and ultrasonographic frequency. On the low frequency, stratum vasculare and longitudinal muscle layer were not likely to be distinguished in diestrus, but estrus. On the high frequency, stratum vasculare and longitudinal muscle layer were observed regardless of estrous cycle. Also, every uterine structure was easily distinguished on high frequency than low frequency owing to precision of distinction in layers. The difference of results followed by the experiments conditions between in vitro and in vivo was that uterine endometrium and circular muscle layer in diestrus in vitro were difficult to be distinguished and uterine lumen was observed during whole estrous cycle. In vivo, It was founded that the distinction of stratum vasculare and logitudinal muscle layer in diestrus was complicated and uterine lumen was observed during only estrus. In view of the result so far achieved, normal uterine structure divided in 5 layers on ultrasonography was accorded with microscopic organization, uterine structure was likely to be observed during estrus than diestrus, high frequency checkup than low frequency, and uterine endometrium, circular muscle, stratum vasculare was easily observed regardless of estrous cycle and ultrasonographic frequency.

• Journal of the Korean Society of Groundwater Environment
• /
• v.5 no.1
• /
• pp.1-9
• /
• 1998

Schlumberger soundings and dipole-dipole electrical surveys were carried out in and around the Nanjido waste landfill in August and December, 1995. Survey points were set to be identical as those in August, 1994 and February, 1995 as possible. To elucidate the annual variation of resistivity structure in and around the landfill, 50 electrical soundings and 2 lines of dipole-dipole surveys were conducted. Interpretations of these data show that mean resistivity values become lower and thicknesses of contaminated layers by leachate thicker than those of the previous year in and around the landfill. Especially, mean thicknesses of saturated layers with leachate increased by about 3∼6 m and resistivities of bedrock decreased. Considering actual hydraulic conductivity, such increments of mean thicknesses are somewhat large. But resistivity variations in and around the Nanjido landfill clearly indicates contamination of layers by leachate is in progress even though some errors in measurements and interpretations are considered. On the other hand, sounding data in the back area of the landfill are almost identical to those of the previous year. From these results, it appears that contamination of weathered zone and bed rock is in progress mainly inside and in the front area of the landfill.