In pediatric patients, a laryngeal mask airway (LMA) is usually used during minor surgeries that require general anesthesia. No esophageal injury has been reported after insertion of an LMA. We report a case of an esophageal injury with intramural dissection after an $i-gel^{(R)}$ (size, 1.5; Intersurgical Ltd.) insertion in a pediatric patient. A 2-month-old male infant was hospitalized for left inguinal herniorrhaphy. After induction of anesthesia, a trained resident tried to insert an $i-gel^{(R)}$. However, it was only successful after three attempts. Dysphagia was sustained until postoperative day 10, and the pediatrician observed duplication of the esophagus on gastroendoscopy. However, a whitish mucosal lesion, which looked like a scar, was observed, and previous lesions suggestive of esophageal duplication were almost healed on postdischarge day 11. His condition was diagnosed as dysphagia and esophagitis due to an esophageal laceration, not esophageal duplication. He was scheduled for symptomatic treatment with a proton pump inhibitor. In conclusion, although an esophageal injury or perforation in pediatric patients is rare, an LMA insertion or a procedure such as aspiration or nasogastric tube insertion should be performed gently to avoid a possible injury to the esophagus in pediatric patients.
While maritime arbitration industry has not been prevalent in Korea, Korea ranked fifth in terms of export volume and its shipbuilding industry ranked top globally in shipbuilding order volume in 2020. The discrepancy between the maritime industry's productivity and relative lack of maritime arbitration has had a negative impact on Korea's economic development. To address these problems, this paper i) reviews preceding research, ii) examines the Korean maritime arbitration system's status and analyzes the KCAB's maritime arbitration statistics from 2005-2020, iii) examines major foreign maritime arbitration institutions' status and strategies including LMAA, SMA, SCMA, and HKMAG, and lastly iv) suggests practical ways to promote maritime arbitration in Korea. The Suggestions for promoting maritime arbitration are 1) to prepare and promote various maritime standardized forms for the Korean shipping industry, 2) to insert an arbitration clause in medium and large-size Korean shipping firms' B/L clause, 3) to expand professional maritime manpower training and other infrastructure, and 4) to enhance the predictability of the result of arbitration through maritime arbitral awards or by examining the feasibility of the appeal system against the arbitral award only on a point of law in the future. In conclusion, the success or failure of promoting maritime arbitration in Korea depends on the will, passion, cooperation and practice of the most important key players in maritime arbitration, such as the Asia Pacific Maritime Arbitration Center (APMAC), the Korean Commercial Arbitration Board (KCAB) and the Seoul Maritime Arbitrators Association (SMAA).
Proceedings of the Korean Institute of Building Construction Conference
/
2023.11a
/
pp.155-156
/
2023
In the case of steel door frames commonly found in general buildings, there are various assembly methods such as rivets, bolts, and welding, but the welding method is generally used. However, this welding joint method has many problems, such as distortion due to heat and damage due to external shock. In particular, when used as a fire door, problems may occur in the event of a fire due to distortion caused by heat from welding and the weak welded joint area. In the case of rivet or welded joints, when moved after assembly, joint loosening due to external shock may occur. Problems may arise where the bonding strength becomes weak. In addition, with the recent increase in high-rise buildings and larger buildings, when assembly is completed and brought to the site, a place is needed to store it, and in addition, there is a problem in that it has to be transported several times in small quantities to the installation site, which is another problem of time and cost loss. This is coming to the fore. In order to fundamentally solve this problem, we have researched and developed a non-welding door frame that can be assembled on site. We have researched and developed three assembly methods: screw-type, insert-type, and protrusion-type. Non-welded door frames are small in size and easy to package, making them advantageous for domestic and overseas exports.
This study was to establish in uitro culture system of mouse preantral follicles and to obtain higher in vitro development rates and production of live young. Preantral follicles were obtained from 12-day-old FI mouse (C57BL $\times$ CBA) by enzymatical methods. Oocyte-granulosa cell complexes (OGCs) of preantral follicles were loaded on Transwell-COL insert and cultured in $\alpha$MEM supplemented with 5% FBS, 100 mIU/$m\ell$ FSH and 100 mIU/$m\ell$ hMG for IVG. IVM was performed in $\alpha$MEM supplemented 1.5 IU/$m\ell$ hCG for 18 hrs and IVF was carried out in Ml6 medium. Embryos were cultured in modified Ml6 medium supplemented 10% FBS for 4 days. The effect of the OGCs size on the nuclear/cytoplasmic maturation was significantly higher in 120-150 ${\mu}{\textrm}{m}$ (MII: 33.0%, $\geq$2-cell: 36.7%, $\geq$morula: 20.9%) than in 70-110 ${\mu}{\textrm}{m}$ (MII: 12.2%, $\geq$2-cell: 10.2%, $\geq$morula: 4.8%) (p<0.001). In period of the IVG days, the rate of $\geq$2-cell was significantly higher in 10 days(38.2%) than in 12 days (20.0%) (p<0.01). In period of IVF time, 9 hrs ($\geq$2-cell: 31.5%, $\geq$ morula: 14.3%) indicated significantly higher cytoplasmic maturation rate than 4 hrs ($\geq$2-cell: 17.5%, This study was to establish in vitro culture system of mouse preantral follicles and to obtain higher in vitro development rates and production of live young. Preantral follicles were obtained from 12-day-old FI mouse (C57BL $\times$ CBA) by enzymatical methods. Oocyte-granulosa cell complexes (OGCs) of preantral follicles were loaded on Transwell-COL insert and cultured in $\alpha$MEM supplemented with 5% FBS, 100 mIU/$m\ell$ FSH and 100 mIU/$m\ell$ hMG for IVG. IVM was performed in $\alpha$MEM supplemented 1.5 IU/$m\ell$ hCG for 18 hrs and IVF was carried out in Ml6 medium. Embryos were cultured in modified Ml6 medium supplemented 10% FBS for 4 days. The effect of the OGCs size on the nuclear/cytoplasmic maturation was significantly higher in 120-150 ${\mu}{\textrm}{m}$ (MII: 33.0%, $\geq$2-cell: 36.7%, $\geq$morula: 20.9%) than in 70-110 ${\mu}{\textrm}{m}$ (MII: 12.2%, $\geq$2-cell: 10.2%, $\geq$morula: 4.8%) (p<0.001). In period of the IVG days, the rate of $\geq$2-cell was significantly higher in 10 days(38.2%) than in 12 days (20.0%) (p<0.01). In period of IVF time, 9 hrs ($\geq$2-cell: 31.5%, $\geq$ morula: 14.3%) indicated significantly higher cytoplasmic maturation rate than 4 hrs ($\geq$2-cell: 17.5%, $\geq$morula: 4.8%) and 7 hrs ($\geq$2-cell: 20.4%, $\geq$morula: 6.1%) (p<0.01). However, there was no difference in cytoplasmic maturation between co-cultured preantral follicle ( $\geq$morula: 17.4%) and preantral follicle cultured in Ml6 ( $\geq$morula: 17.4%). 22 morula and blastocysts produced in above optimal condition were transferred to uterus of 2 pseudopregnant recipients, 1 recipient was pregnant and then born 1 live young. This result demonstrates that in vitro culture system of preantral follicles can be used efficiently as another method to supply mouse oocyte.morula: 4.8%) and 7 hrs (2-cell: 20.4%, $\geq$morula: 6.1%) (p<0.01). However, there was no difference in cytoplasmic maturation between co-cultured preantral follicle ( $\geq$morula: 17.4%) and preantral follicle cultured in Ml6 ( $\geq$morula: 17.4%). 22 morula and blastocysts produced in above optimal condition were transferred to uterus of 2 pseudopregnant recipients, 1 recipient was pregnant and then born 1 live young. This result demonstrates that in vitro culture system of preantral follicles can be used efficiently as another method to supply mouse oocyte.
Oryza grandiglumis (CCDD, 2n=48), one of the wild rice species, has been known to possess fungal-,bacterial-, and insect-resistance against sheath blight, rice blast, bacterial leaf blight and brown plant hopper (Nilaparvata lugens). To rapidly isolate differentially expressed genes responding to fungal and wounding stress, wounding and yeast extract were treated to O. grandiglumis for 24 hrs. Suppression subtractive hybridization (SSH) method was used to obtain differentially expressed genes from yeast extract and wounding treated plants. Seven hundreds and seventy six clones were obtained by subcloning PCR product, and colony array and screening were carried out using radio-isotope labeled cDNA probes prepared from the wounding and yeast extract treated plants. One hundred and fifteen colonies were confirmed as true positive ones. Average insert size of the clones were ranged from 400 bp to 700 bp and all the inserts were sequenced. To decide the identity of those clones, sequences were analyzed by sequence homology via GenBank database. The homology search result showed that 68 clones were matched to the genes with known function; 16 were related to primary metabolism, 5 to plant retrotransposons, 5 to defense related metallothionein-like genes. In addition to that, others were matched to various genes with known function in amino acid synthesis and processing, membrane transport, and signal transduction, so on. In northern blot analysis, induced expressions of ogwfi-161, ogwfi-646, ogwfi-663, and ogwfi-695 by wounding and yeast extract treatments were confirmed. The result indicates that SSH method is very efficient for rapid screening of differentially expressed genes.
Jeon, Mi Jin;Seo, Mi Ja;Youn, Young Nam;Yu, Yong Man
The Korean Journal of Pesticide Science
/
v.18
no.3
/
pp.202-209
/
2014
RNA interference (RNAi) is the method which controls phenotypes of gene in live cells. Chitinase is the enzyme helping digestion and absorption of old cuticles during the ecdysis of insects. In order to investigate molting-inhibition effect with the chitinase related gene in Spodoptera litura, RNA was extracted from the $5^{th}$ instars. cDNA was synthesized and then we obtained about 700 bp size chitinase. After PCR products were cloned into a pGEM T-easy vector, colonies were picked. DNA was extracted from the colony cultures. EcoR I enzyme was used to check whether PCR products were inserted or not. And then we confirmed vector band of about 3 kb and insert band of about 700 bp. To synthesize the dsRNA, each DNA was cut with Spe I and Nco I enzymes (Circular DNA became lineared DNA). After synthesis of dsRNA, approximately 5 ul dsRNA was injected into the $3^{rd}$ abdominal segment of S. litura $4^{th}$ larvae. The concentration of dsRNA was about $10{\mu}g/{\mu}l$. We confirmed larval-larval molting : there were phenotypically abnormal individuals - for instance malformation, molting inhibition and change of integument color. Pupaadult molting : there were phenotypically abnormal individuals - for instance molting inhibition, change of wings and malformation. Also we could investigate the pupation, emergence and variation about noninjection, treated with DW and dsRNA. Each pupation was non-injection 83.3%, DW 78.3% and dsRNA 66.7%. Each emergence was non-injection 90.0%, DW 72.3% and dsRNA 65.0%. So we considered that chitinase dsRNA induced molting inhibition effect. But each variation was non-injection 8.9%, DW 2.9% and dsRNA 19.2%. Therefore dsRNA group showed the highest variation value. When 18 hours after injecting dsRNA, we could obtain abnormal individual.
KIPS Transactions on Software and Data Engineering
/
v.5
no.12
/
pp.623-634
/
2016
Most of existing frequent pattern mining methods address time efficiency and greatly rely on the primary memory. However, in the era of big data, the size of real-world databases to mined is exponentially increasing, and hence the primary memory is not sufficient enough to mine for frequent patterns from large real-world data sets. To solve this problem, there are some researches for frequent pattern mining method based on disk, but the processing time compared to the memory based methods took very time consuming. There are some researches to improve scalability of frequent pattern mining, but their processes are very time consuming compare to the memory based methods. In this paper, we present PPFP as a novel disk-based approach for mining frequent itemset from big data; and hence we reduced the main memory size bottleneck. PPFP algorithm is based on FP-growth method which is one of the most popular and efficient frequent pattern mining approaches. The mining with PPFP consists of two setps. (1) Constructing an IFP-tree: After construct FP-tree, we assign index number for each node in FP-tree with novel index numbering method, and then insert the indexed FP-tree (IFP-tree) into disk as IFP-table. (2) Mining frequent patterns with PPFP: Mine frequent patterns by expending patterns using stack based PUSH-POP method (PPFP method). Through this new approach, by using a very small amount of memory for recursive and time consuming operation in mining process, we improved the scalability and time efficiency of the frequent pattern mining. And the reported test results demonstrate them.
Traditional screening techniques have missed up to 99% of microbial resources existing in the nature. Strategies of direct cloning of environmental DNAs comprising tine genetic blueprints of entire microbial metagenomes provide vastly more genetic information than is contained in the culturable. Therefore, one way to screening the useful gene in a variety of environments is the construction of metagenomic DNA library. In this study, the water samples were collected from Daecheong Reservoir in the mid Korea, and analyzed by T-RFLP to examine the diversity of the microbial communities. The crude DNAs were extracted by SDS-based freezing-thawing method and then further purified using an $UltraClean^{TM}kit$ (MoBio, USA). The metagenomic libraries were constructed with the DNAs partially digested with EcoRI, BamHI, and SacII in Escherichia coli DH10B using the pBACe3.6 vector. About 14.0 Mb of metagenomic libraries were obtained with average inserts 13 ${\sim}$ 15 kb in size. The genes responsible for degradation of 1, 2-dichloroethane (1, 2-DCE) via hydrolytic dehalogenation were identified from the metagenomic libraries by colony hybridization. The 1, 2-dichloroethane dehalogenase gene (dhlA) was cloned and its nucleotide sequence was analyzed. The activity of the 1, 2-DCE dehalogenase was highly expressed to the substrate. These results indicated that the dhlA gene identified from the metagenomes derived from Deacheong Reservoir might be useful to develop a potent strain for degradation of 1, 2-DCE.
Yang, Tae-Jin;Yu, Yeisoo;Frisch, David A.;Lee, Seunghee;Kim, Hye-Ran;Kwon, Soo-Jin;Park, Beom-Suk;Wing, Rod A.
Genomics & Informatics
/
v.2
no.4
/
pp.174-179
/
2004
We developed various plasmid cloning vectors that are useful in the construction of genomic and shotgun libraries. Two medium copy vectors, pCUGlblu21 (pCb21) and pAGlblu21 (pAb21), which are resistant to kanamycin ($Km^R$) and chloramphenicol ($Cam^R$), respectively, are useful for cloning DNA inserts ranging from 5kb to 15kb. Two high copy vectors, pCUGlblu31 (pCb31) and pAGlblu31 (pAb31), containing $Km^R$ and $Cam^R$, respectively, are useful for DNA inserts less than 5kb. These vectors are well adapted for large-scale genome sequencing projects by providing choice of copy number and selectable marker. The small vector size is another advantage of these vectors. All vectors contain lacZa including multicloning sites that originated from pBluscriptllsk- for easy cloning and sequencing. Two medium copy vectors contain unique and rare cutting Swal (ATTTAAAT) restriction enzyme sites for easy determination of insert size. We developed two combined vectors, pC21A31 and pC31A21, which are combinations of (pCb21 + pAb31) and (pCb31 + pAb21), respectively. These two vectors provide four choices of vectors such as $Km^R$ and medium, $Cam^R$ and high, $Cam^R$ and medium, and $Km^R$ and high copy vectors by restriction enzyme cutting, dephosphorylation, and gel purification. These vectors were successfully applied to high throughput shotgun sequencing of rice, tomato, and brassica BAC clones. With an example of extremely biased hydro sheared 3 kb shotgun library of a tomato BAC clone, which is originated from cytogenetically defined peri-centromeric region, we suggest the utility of an additional 10 kb library for sequence assembly of the difficult-to-assemble BAC clone.
In this paper. the proposed method for the digital watermarking is based on the multiresolution wavelet transform. The 1-level Discrete Wavelet Transform(DWT) coefficients of a $2N_{wx}{\times}2N_{wy}$ binary logo image used as a watermarks. The LL band and middle frequency band of the host image that the 3-level DWT has been performed are divided into $N_{wx}{\times}N_{wy}$ size and we use large coefficients at the divided blocks to make threshold. we set the thresholds that completely insert the watermark in each frequency of the host image. The thresholds in each frequency of the host image differ each other. The watermarks where is the same positions are added to the larger coefficients than threshold in the blocks at LL band and middle frequency band in order to prevent the quality deterioration of the host image. The watermarks are inserted in LL band and middle frequency band of the host image. In order to be invisibility of the watermark, the Human Visual System(HVS) is applied to the watermark. We prove the proper embedding method by experiment. We rapidly detect the watermark using this watermarking method. And because the small size watermarks are inserted by HVS, the results confirm the superiority of the proposed method on invisibility and robustness.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.