• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 전력전자학술대회
• /
• pp.4-5
• /
• 2019

본 논문은 DC마이크로그리드에서 저전압 배터리 에너지 저장 시스템과 DC 버스 연결을 위한 Dual Active Bridge(DAB) 컨버터의 제어 방법에 대한 연구이다. DC 마이크로그리드에서 전력을 효율적으로 사용하기 위해 양방향 전력전달이 쉬운 DAB 컨버터는 많이 사용되고 있다. 다만, 낮은 배터리 저장 시스템을 사용하는 경우 과도상태에서 DC 버스 측 커패시터를 충전하기 위해 높은 돌입전류가 발생하게 된다. 이러한, 높은 돌입전류는 시스템의 전력반도체 소자를 파손시키는 문제를 가져온다. 따라서, 초기 돌입전류를 저감시킬 수 있는 소프트 스타트 알고리즘이 필요하다. 본 논문에서는 돌입전류 저감을 위한 소프트 스타트 알고리즘을 제안하고, 3kW급 DAB 컨버터의 실험 결과를 바탕으로 제안 된 알고리즘을 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.817-820
• /
• 2002

Since a squirrel cage induction motor by NEMA Design types is designed to withstand full-voltage starting, direct starting method can be the most economical one. Starting a squirrel cage motor from standstill by connecting it directly across the line may allow inush currents of approximately 500-600% of rated current at lagging power factor of 35-50%. For many of the large motors, the starting inrush current may be great enough to cause voltage dips, which may adversely affect the building's lighting system. Electric utilities also have restrictions on starting currents, so that voltage fluctuations can be held to prescribed limits. Therefore the need for choosing the most appropriate method of motor starting is quite essential. In this paper, we proposed a plan for the selection of the most appropriate motor starting method, first by way of numeric simulation using manufacturer's data and second by way of actual experience. So far, more often than not, the selection of motor starting method has been accomplished only as regards to the capacity of the motor and the frequency of starting and stopping. But nowadays such high-tech apparatus as soft starters are being developed, and we are on the position to give more attention to clarify the way of selection of the motor starting method.

• 조명전기설비학회논문지
• /
• 제30권2호
• /
• pp.65-70
• /
• 2016

Power interruption is a phenomenon that no voltage is displayed over a short time or long time. Most devices will not operate normally when the supply voltage is low or does not exist. However, the device can also be operated with a different power which is ensured by a separate power generation. Recently, power interruption has been reduced gradually by the improvement of electricity quality, its duration also has been very short. Induction motors are widely used for the pumping in the water and sewage facilities and power plant applications. The pump is used as a machine for moving the fluid in the high place from a low location. So pump equipment always have a potential energy. If a momentary interruption occurs, the potential energy of the pump is reversed as that of water turbine and motor is operated as generator. This study is an analysis for the voltage variation, current, torque and power flow by the generating operation of the induction motor before and after the change of momentary interruption.

• 조명전기설비학회논문지
• /
• 제25권9호
• /
• pp.75-79
• /
• 2011

The MOV(Metal Oxide Varistor), a voltage limiting element, has been installed in the SPD(Surge Protective Device) or inside the internal circuit of an electronic appliance for protection of the electric power system and electronic device against electrical surge. Such an MOV is exposed, however, to the risk of the thermal runaway resulting from excessive voltage and deterioration. In this paper, a reciprocal action has been tested and analyzed using a phosphorus bronze switching module and the low-temperature solder. And a short current break characteristic test linked with the circuit breaker has been performed to limit the inrush current when the MOV breaks down. It has been proven that the phosphorus bronze switching module installed inside the internal circuit can improve the safety of the power line system and the electronic device.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 A
• /
• pp.607-609
• /
• 2004

A breakdown occurred in power transformer causes interruption of power transmission. Protective relay should be installed in transformer to detect such a fault. Protective relaying algorithm for transformer must be included a function to discriminate between winding fault and inrushing state. Recently, current differential relay is widely used to protect power transformer. However if inrush occurs in transformer, relay can be tripped by judging as internal fault. New algorithms are required in order to such problem. This study proposes a new protective relaying algorithm using Neuro-Fuzzy inference and wavelet. A variety of transformer transient states are simulated by BCTRAN and HYSDT in EMTP. D1 coefficients of differential current are obtained by wavelet transform. D1 coefficients and RMS of 3-phase primary voltage are used to make a target data and are trained by Nwo-Fuzzy algorithm which distinguishes correctly whether internal fault occurs or not within 1/2 after fault detection. It is evaluated that the results obtained by simulations can effectively protect a transformer by contact discriminating between winding fault and inrushing state.

• 전기학회논문지
• /
• 제65권1호
• /
• pp.200-207
• /
• 2016

Nowadays, it is a global trend to build refinery or chemical plants with an isolated system in a place distant from the center of a city. In the refinery or chemical plants equipped with an isolated system, induced motors mostly take the load, and the scale of high-voltage electric motors reaches from several kW up to several MW. Therefore, it is needed to examine the effects of electric motors on the power system closely in the stages of planning and designing a plant to build a stable power system. This study is aimed to investigate how to decide rated voltage in consideration of stability which has not been considered in the stages of planning and designing so far in order to secure stability for the power system.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권3호
• /
• pp.312-317
• /
• 2014

본 논문에서 고체레이저 광원으로 쓰이는 제논 플래쉬램프 점등을 위해 LLC공진형 컨버터 설계방법을 제안한다. 1.5kW 대용량 LLC 공진형 컨버터 제작을 통해 램프 방전특성 실험을 수행하였으며 램프 아크방전 시에 부하급변으로 인한 돌입전류를 제한하기 위한 K값의 변화에 따라 램프부하에 최대전력을 전달할 수 있으며, 콘덴서 및 전류제한저항 등을 적절하게 조절함으로써 전원장치의 원가를 절감할 수 있도록 하였다. 램프 방전회로에 대한 수학적인 모델링은 실제 방전상황에 맞추어 구성한 회로 내부손실과 램프자체의 파라미터 값들을 포함시켜 고려하였다. 시뮬레이션 결과와 실측파형을 비교분석하여 제논램프 점등조건에 대한 최적화 방안을 제시하였다.

• 전기전자학회논문지
• /
• 제15권4호
• /
• pp.319-323
• /
• 2011

본 논문에서는 Mobile 기기의 다양한 기능을 지원하기 위해 사용되는 내부 회로들의 낮은 전압 레벨을 지원하기위해 가장 널리 사용되는 SMPS(Switch Mode Power Supply)방식의 Buck converter를 설계한다. 제안된 Buck converter는 넓은 부하 영역에서 높은 효율을 가지는 것을 목적으로 일반적인 구동 방식인 PWM (Pulse Width Modulation)Mode의 고 효율 저 리플 특성 구현 외에 PFM(Pulse Frequency Modulation) Mode를 적용하여 낮은부하 조건 혹은 부하를 사용하지 않는 대기 시간에서도 고 효율 저 리플 특성을 가지는 Dual mode synchronous buck converter를 설계한다. 이를 위해 본 논문에서는 부하 변동 시에 PWM - PFM Mode로의 효율적인 변환방법 및 저 리플 특성을 위한 방법을 제안한다. 또한 제안된 IC는 Mobile 기기에 부합하는 입력 전압 범위 2.5V-5V를 가지며, 2.5Mhz의 높은 주파수로 동작하여 리플 특성이 양호하고 집적화가 유리하다. 고효율을 위하여 Synchronous Type 설계 및 Dynamic Control 방식을 적용하였다. 보호 기능으로는 회로 동작의 초기 시에 발생하는 Inrush Current를 방지하기 위한 Soft start function 외에 Current limit, Thermal shutdown function, UVLO 회로가 내장되어 신뢰성을 높였다.

• Journal of Electrical Engineering and Technology
• /
• 제12권1호
• /
• pp.486-493
• /
• 2017

Refineries and chemical plants with isolated power systems that have a limited power supply are more susceptible to voltage changes from disturbances compared to power systems connected with a power company. Furthermore, most loads in such cases are induction motor loads, and therefore, transient voltage characteristics when starting a high-capacity motor must be examined. In general, high-capacity motors are customized appropriately to the load performance curve by the manufacturer during the construction of an industrial plant. Subsequently, when complying with the voltage drop permitted by international standards during the design process, power supply equipment such as transformers and generators is overdesigned. Therefore, a novel analysis is necessary on standards for startup and constraint voltage drops, as well as on identifying the voltage drop limitations for starting high-capacity motors in refineries and chemical plants with isolated power systems. In this study, field tests on an industrial plant were conducted, and simulations modeled under conditions identical to those of the field test system were performed using the general-purpose program ETAP in order to compare the results.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권12호
• /
• pp.1479-1485
• /
• 1999

This paper proposes a fuzzy decision making method for power transformer protection to identify an internal fault from other transient states such as inrush, over-excitation and an external fault with current transformer (CT) saturation. In this paper, analyzing over 300 EMTP simulations of disturbances, four input variables are selected and fuzzified. At every sampling interval from half to one cycle after a disturbance, from the EMPT simulations, different fuzzy rule base is composed of twelve if-then fuzzy rules associated with their basic probability assignments for singleton- or compound-support hypotheses. Dempster's rule of combination is used to process the fuzzy rules and get the final decision. A series of test results clearly indicate that the method can identify not only an internal fault but also the other transients. The average of relay operation times is about 12(ms). The proposed method is implemented into a Digital Signal Processor (TMS320C31) and tested.