• 한국산학기술학회논문지
• /
• 제19권5호
• /
• pp.82-88
• /
• 2018

본 논문에서는 차량 주행 시 노면으로부터 진동 에너지를 흡수해 에너지 하베스팅을 통해 전기에너지 발생이 가능한 전자기 현가장치의 구조와 현가장치 내에 결합되어 전자기 댐퍼 역할을 하는 8극 8상의 선형 발전기의 구조를 검토하였다. 실제 주행 노면에 따른 전자기 현가장치의 에너지 하베스팅 효과를 비교하기 위해 차량 시뮬레이션 프로그램인 Carsim과 Simulink를 연동하여 민군 겸용 차량 모델을 사용해 두 가지 실제 노면인 아스팔트 노면과 비포장도로 노면 조건에 대한 모의 주행시험을 수행한 결과, 아스팔트 노면과 비포장도로에서 현가장치의 상대 변위 각각 8mm, 13mm의 결과가 나타났다. 다음으로 전자기 현가장치 내에 결합된 선형 발전기를 모델링 하여 도출한 현가장치 상대 변위 값을 적용해 상용 전자기 해석 프로그램인 ANSYS MAXWELL을 이용해 동일한 해석조건을 적용하여 해석 시간 0.3s 동안 전자기 시뮬레이션을 수행하여 시간에 따른 발전량 결과를 도출해 비교하였으며 비포장도로와 아스팔트 노면에서의 평균 발전량은 각각 198.6W, 98.7W로 비포장도로의 경우 103.7% 높은 값을 보이는 것을 확인하였다. 마지막으로 노면의 주파수와 현가장치 입력 변위가 발전 출력에 영향을 끼치는 민감도를 비교한 결과 두 변수의 민감도는 각각 1.725, 1.283으로 노면 주파수가 전자기 시뮬레이션 출력변수인 평균 발전량에 34.5 % 높은 영향을 끼치는 결과를 확인하였다.

• Nuclear Engineering and Technology
• /
• 제52권4호
• /
• pp.721-733
• /
• 2020

In nuclear engineering, the occurrence of critical heat flux (CHF) is complicated for rod bundle, and it is much more difficult to predict the CHF when it is in natural circulation under motion condition. In this paper, the dryout-type CHF is investigated for the rod bundle in a natural circulation loop under rolling motion condition based on the coupled analysis of subchannel method, a one-dimensional system analysis method and a CHF mechanism model, namely the three-fluid model for annular flow. In order to consider the rolling effect of the natural circulation loop, the subchannel model is connected to the one-dimensional system code at the inlet and outlet of the rod bundle. The subchannel analysis provides the local thermal hydraulic parameters as input for the CHF mechanism model to calculate the occurrence of CHF. The rolling motion is modeled by additional motion forces in the momentum equation. First, the calculation methods of the natural circulation and CHF are validated by a published natural circulation experiment data and a CHF empirical correlation, respectively. Then, the CHF of the rod bundle in a natural circulation loop under both the stationary and rolling motion condition is predicted and analyzed. According to the calculation results, CHF under stationary condition is smaller than that under rolling motion condition. Besides, the CHF decreases with the increase of the rolling period and angular acceleration amplitude within the range of inlet subcooling and mass flux adopted in the current research. This paper can provide useful information for the prediction of CHF in natural circulation under motion condition, which is important for the nuclear reactor design improvement and safety analysis.

• 한국광학회지
• /
• 제15권4호
• /
• pp.299-308
• /
• 2004

공액상 없이 여러 가지 물체를 동시에 재생 가능한 다채널 다단계 위상형 컴퓨터-생성 홀로그램(CGH)을 설계할 수 있는 보다 효과적인 부호화 방법을 제안하였다. 다채널 CGH 패턴을 설계하기 위하여 pixel oriented CGH 제작방식을 이용하였다. 설계된 CGH 패턴의 성능평가를 위해 양자화 위상 단계수에 따른 여러 가지 다채널 CGH들의 회절효율(η), 평균제곱에러(MSE) 및 신호 대 잡음비(SNR) 등의 변화를 살펴보았다. 일반적으로 CGH에 기록되는 물체 수가 증가할수록 CGH의 재생품질은 떨어진다. 그러나 회절효율의 경우 1채널 CGH가 70%이고 제안한 부호화 방법으로 설계한 2채널, 4채널, 8채널 CGH들은 각각 62%, 62%, 63%로 채널수가 증가하여도 큰 차이가 없음을 컴퓨터 모의실험을 통하여 확인할 수 있었다. 또한 렌즈로 결합되어 있는 PAL-SLM과 XGA형 LCD 그리고 이에 빛을 조명하는 LD 등으로 구성되어 있는 액정 공간 광 위상 변조기를 사용하여 광학적으로 CGH를 구현하여 입력영상을 재생$.$고찰해 보았다.

• 수산해양기술연구
• /
• 제49권3호
• /
• pp.301-310
• /
• 2013

To suggest a standard concerning with the arrangement of bridge equipment, the authors conducted the video observations with 3CCD (charge coupled device) cameras installed on the ceil of the bridge for monitoring the working activities of two bridge teams (the skipper/mate1 and the skipper/mate2) in a Korean coastal large trawler(gross tonnage: 139) for five days from July 30th. 2010 and analyzed of the data. Work elements coded by the work activities were input on the sheet of work analysis by the time unit of 1 sec according to the time occurred. A single work element among the work activities for every 5 minutes was denoted as the number of occurrence. The frequency of equipment usage was limited only in the usage of the equipment. In the case of the navigation and the towing net two ranks were integrated and analyzed. On the other hand, in the case of the casting net and the hauling net, two processes were integrated to as one and then analyzed separately as two ranks. As the results, 15 elements of work was carried out between two bridge teams for the observation; lookout, radar, GPS plotter, fish finder, net monitor, fishing deck, RPM indicator, rudder angle indicator, compass card, for maneuver; steering, ship speed control, trawl winch operation and external communications, paper works and others. It was found that the work load of the skipper per 5 minutes accordance with the navigation, the casting net, the towing net and the hauling net are 20.5 times, 11.9 times, 38.0 times and 9.5 times respectively, the mates are 65.2 times, 66.5 times, 85.7 times and 59.1 times respectively. The radar was shown the highest frequency of the equipment usage and the next was the fish finder, the GPS plotter and the external communications in the case of the navigation. In the case of the towing net the frequency of usage was high the ranking as the radar, the net monitor, the fish finder, the GPS plotter, the steering system and the external communications. In the case of the integrated process both of the casting and hauling net the trawl winch was shown the highest frequency to the skipper and the next was the GPS plotter and the radar, and the steering system was shown the highest frequency to the mate and the next was the radar, the ship speed control system, the GPS plotter, the net monitor and the fish finder.

• Composites Research
• /
• 제13권5호
• /
• pp.50-59
• /
• 2000

본 논문에서는 복합재료 패널 플러터를 억제할 수 있는 두 가지 방법에 대해서 연구하였다. 첫번째, 능동제어 방법에서는 선형 제어 이론을 바탕으로 제어기를 설계하였으며 제어입력이 작동기에 가해진다. 여기서 작동기로는 PZT를 사용하였다. 두 번째, 인덕터와 저항으로 구성되어진 션트회로를 사용하여 시스템의 감쇠를 증가시킴으로써 패널 플러터를 억제할 수 있는 새로운 방법인 수동감쇠기법에 대한 연구가 수행되었다. 이 수동감쇠기법은 능동적 제어보다 강건(robust)하며 커다란 전원 공급이 필요하지 않고 제어기나 감지 시스템과 같이 복잡한 주변 기기가 필요 없이도 실제 패널 플러터 억제에 쉽게 응용할 수 있는 장점을 가지고 있다. 최대의 작동력/감쇠 효과를 얻기 위해서 유전자 알고리듬을 사용하여 압전 세라믹의 형상과 위치를 결정하였다. 해밀턴 원리를 사용해서 지배 방정식을 유도하였으며, 기하학적 대변형을 고려하기 위해 von-Karman의 비선형 변형률-변위 관계식을 사용하였으며 공기력 이론으로는 준 정상 피스톤 1차 이론을 사용하였다. 4절점 4각형 평판 요소를 이용하여 이산화된 유한 요소 방정식을 유도하였다. 효율적인 플러터 억제를 위해 패널 플러터에 중요한 영향을 미치는 플러터 모드를 이용한 모드축약기법을 사용하였으며, 이를 통해 비선형 연계 모달 방정식이 얻어지게 된다. 능동적 제어 방법과 수동 감쇠 기법에 의해 수행되어진 플러터 억제 결과들을 Newmark 비선형 시분할 적분법을 통해 시간 영역에서 살펴 보았다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권5호
• /
• pp.621-628
• /
• 2004

Twenty male buffalo calves of 6-9 months of age (average body weight, 97 kg) were randomly allocated into two main groups of four (control) and sixteen (supplemented) calves. The supplemented group was further divided in to four equal sub-groups, with the two groups supplemented with a liquid preparation of urea-molasses, UML1, containing fish meal and UML2, containing formaldehyde treated deoiled mustard cake (FDMC) and the other two, with a semi-solid preparation, UMC1 with FDMC and deoiled rice bran (DORB) contributing similar level of CP as in UML2 and UMC2 with double the level of FDMC to that in UMC1. The control group was fed with DORB along with ad libitum wheat straw at 40:60 ratios. The rest of the groups were fed on the above diet supplemented with 500 g (as fed basis) of urea-molasses preparations. The experimental feeding was carried out for 24 weeks including a metabolism trial towards the end of experimental feeding. Daily feed intake and fortnightly change in live weight were also recorded during the study. Catalytic supplementation of 500 g urea-molasses induced 8-25% higher voluntary feed intake of wheat straw, resulting in 15-25% higher DM and OM intake. The digestibility of DM, OM, total carbohydrate, NDF, ADF, hemicellulose and cellulose in all the dietary groups were comparable. The CP digestibility of calves in supplemented groups were higher (p<0.05) than the control group. The balance of nutrients, viz. N, Ca and P, was also higher in the supplemented groups. Significantly higher intake of digestible CP coupled with other digestible nutrients attributed to higher TDN (1.67-1.78 vs. 1.37 kg) and ME (5.94-6.31 vs. 4.87 Mcal) intake in urea-molasses supplemented groups which resulted in higher live weight gain compared to that in control group (p<0.01). Between the supplements, UML2 and UMC2 faired non-significantly, indicating formalin treated mustard cake as a suitable replacement to fishmeal in the supplement. The overall ranking based on intake and digestibility of nutrients, live weight gain, economic evaluation and input-output relationship revealed that the rations with UML2 and UMC1 to be of greater value compared to other types. From the study it can be concluded that young ruminants can be reared successfully on a basal diet of deoiled rice bran and wheat straw supplemented with cheaper urea-molasses-mineral mix.

• 부모자녀건강학회지
• /
• 제4권1호
• /
• pp.35-55
• /
• 2001

Recently attention has been focused on the effects of early intervention, or its lack, on both normal and preterm infants. Particularly numerous studies suggest that premature infants are not necessarily understimulated but instead are subjected to inappropriate stimulation. Developmental support and sensory stimulation have become clinical opportunities in which nursing practice can impact on the neurobehavioral outcome of premature infants. Developmental care has been widely accepted and implemented in neonatal intensive care units across the country. Increasingly, attention and concern in caring for low-birth-weight infants and premature infants has led clinicians in the field to explore the effects of a complex of interventions designed to create and maintain a developmentally supportive environment; to provide age-appropriate sensory input; and to protect the infant from inappropriate, excessive and stressful stimulation. The components of developmental care include modifications of the macro-environment to reduce NICU light and sound levels, care clustering, nonnutritive sucking, and containment strategies, such as flexed positioning or swaddling. Sensory stimulation of the premature infants is presented to standardize the modification of a developmental intervention based on physiologic and behavioral cues. The most appropriate type of stimuli are those that are sensitive to infant cues. Evaluation of infant physiological and behavioral responds to specific intervention stimuli may help to identify more appropriate interventions based on infants' cues. A critical question confronting the clinician is that of determining when the evidence supporting a change in practice is sufficient to justify making that change. There are acknowledged limitations in the current studies. Many of the studies examined had small sample sizes; used nonprobability sampling; and used a phase lag design, which introduces the possibility of threats to internal validity and limits the generalizability of the results. Although many issues regarding the effects of developmental interventions remain unresolved, the available research base documents significant benefits of developmental care for LBW infants in consistent outcomes, without significant adverse effects. Particularly, although the individual studies vary somewhat in the definition of specific outcomes measured, instrumentation used, time and method of data collection, and preparaion of the care providers, in all studies, infants receiving the full protocol of individualized developmentally supportive care had improvements in some aspect of four areas of infant functioning: level of respiratory or oxygen support, the establishment of oral feeding; length of hospital stay, and infant behavioral regulation. In summary, based on the available literature, individualized developmental intervention should be incorporated into standard practice in neonatal intensive care. And this implementation needs to be coupled with ongoing research to evaluate the impact of an individualized developmental care programs on the short- and long-tenn health outcomes of LBW infants.

• 대한기계학회논문집A
• /
• 제41권11호
• /
• pp.1021-1033
• /
• 2017

본 연구에서는 매설가스배관의 강 슬리브 보수 용접부에 대한 피로수명에 미치는 보수 용접 공정 변수별 영향을 고찰하여 최적 공정을 수립하였다. 상용 유한요소 해석프로그램인 ABAQUS를 이용한 연계 연성 온도-응력 해석을 통해 강 슬리브 보수용접 시 보수용접부에 발생하는 용접 잔류응력을 도출하였다. 또한, 유한요소 선형탄성 응력해석을 통해 운전응력 변이도 도출하였다. 도출된 용접 잔류응력과 운전응력 변이를 입력값으로써 구조응력/파괴역학 접근법에 대입하여 강 슬리브 보수용접부의 피로수명을 평가하였다. 다양한 보수용접 공정 변수에 대한 유한요소해석과 피로평가를 수행하여 공정변수별 피로수명에 미치는 영향을 고찰하였다. 최종적으로는 고찰한 피로수명에 미치는 공정변수별 영항 결과를 토대로 공정 및 경제적 비용을 최소화하고 피로수명을 적절히 향상시킬 수 있는 최적 방안을 도출하였다.

• Ocean Science Journal
• /
• 제40권3호
• /
• pp.167-176
• /
• 2005

A time-series sediment trap was deployed at 1,034 m water depth in the eastern Bransfield Strait for a complete year from December 25, 1998 to December 24, 1999. About 99% of total mass flux was trapped during an austral summer, showing distinct seasonal variation. Biogenic particles (biogenic opal, particulate organic carbon, and calcium carbonate) account for about two thirds of annual total mass flux $(49.2\;g\;m^{-2})$, among which biogenic opal flux is the most dominant (42% of the total flux). A positive relationship (except January) between biogenic opal and total organic carbon fluxes suggests that these two variables were coupled, due to the surface-water production (mainly diatoms). The relatively low $\delta^{13}C$ values of settling particles result from effects on C-fixation processes at low temperature and the high $CO_2$ availability to phytoplankton. The correspondingly low $\delta^{l5}N$ values are due to intense and steady input of nitrates into surface waters, reflecting an unlikely nitrate isotope fractionation by degree of surface-water production. The $\delta^{l5}N$ and $\delta^{l3}C$ values of sinking particles increased from the beginning to the end of a presumed phytoplankton bloom, except for anomalous $\delta^{l5}N$ values. Krill and the zooplankton fecal pellets, the most important carriers of sinking particles, may have contributed gradually to the increasing $\delta^{l3}C$ values towards the unproductive period through the biomodification of the $\delta^{l3}C$ values in the food web, respiring preferentially and selectively $^{12}C$ atoms. Correspondingly, the increasing $\delta^{l5}N$ values in the intermediate-water trap are likely associated with a switch in source from diatom aggregates to some remains of zooplankton, because organic matter dominated by diatom may be more liable and prone to remineralization, leading to greater isotopic alteration. In particular, the tendency for abnormally high $\delta^{l5}N$ values in February seems to be enigmatic. A specific species dominancy during the production may be suggested as a possible and speculative reason.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.478-478
• /
• 2012

Recently, there are many researches in order to increase the deposition rate (D/R) and improve film uniformity and quality in the deposition of microcrystalline silicon thin film. These two factors are the most important issues in the fabrication of the thin film solar cell, and for the purpose of that, several process conditions, including the large area electrode (more than 1.1 X 1.3 (m2)), higher pressure (1 ~ 10 (Torr)), and very high frequency regime (VHF, 40 ~ 100 (MHz)), have been needed. But, in the case of large-area capacitively coupled discharges (CCP) driven at frequencies higher than the usual RF (13.56 (MHz)) frequency, the standing wave and skin effects should be the critical problems for obtaining the good plasma uniformity, and the ion damage on the thin film layer due to the high voltage between the substrate and the bulk plasma might cause the defects which degrade the film quality. In this study, we will propose the new concept of the large-area multi-electrode (a new multi-electrode concept for the large-area plasma source), which consists of a series of electrodes and grounds arranged by turns. The experimental results with this new electrode showed the processing performances of high D/R (1 ~ 2 (nm/sec)), controllable crystallinity (~70% and controllable), and good uniformity (less than 10%) at the conditions of the relatively high frequency of 40 MHz in the large-area electrode of 280 X 540 mm2. And, we also observed the SEM images of the deposited thin film at the conditions of peeling, normal microcrystalline, and powder formation, and discussed the mechanisms of the crystal formation and voids generation in the film in order to try the enhancement of the film quality compared to the cases of normal VHF capacitive discharges. Also, we will discuss the relation between the processing parameters (including gap length between electrode and substrate, operating pressure) and the processing results (D/R and crystallinity) with the process condition map for ${\mu}c$-Si:H formation at a fixed input power and gas flow rate. Finally, we will discuss the potential of the multi-electrode of the 3.5G-class large-area plasma processing (650 X 550 (mm2) to the possibility of the expansion of the new electrode concept to 8G class large-area plasma processing and the additional issues in order to improve the process efficiency.