• 전자공학회논문지A
• /
• 제30A권2호
• /
• pp.29-35
• /
• 1993

A guided-wave TE to TM mode converter was demonstrated by using of the off-diagonal electrooptic coefficients in LiTaO$_{3}$. The input mode is coupled to the other orthogonal mode by the electrooptically induced off-diagonal polarizability. Compared with LiNbO$_{3}$, LiTaO$_{3}$ provides a smaller birefringence and thus a larger phase match period and larger optical bnadwidth. A novel electrode structure allowed a first-order Bragg-coupling phase matching. TE/TM mode conversion efficiency of 90% at 25 [V] was demonstrated with ${\lambda}$=0.63$\mu$m He-Ne laser.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1327-1330
• /
• 2008

A novel fiber optic solution is provided to efficiently mix visible colors. Full color synthesis was achieved utilizing a novel $3{\times}1$ hard polymer clad fiber (HPCF) coupler along with red, green and blue (RGB) light emitting diode (LED) primaries. Varying the intensities of RGB LEDs that are coupled to three input ports, the device rendered a full color with an ultra wide CIE color gamut. Potential applications in pica-projection displays and LED backlights will be discussed.

• Journal of Information Display
• /
• 제9권2호
• /
• pp.9-13
• /
• 2008

A novel push-pull voltage converter structure, using a switched capacitor type voltage doubler, is proposed. The circuit is constructed with a two-stage push-pull voltage doubler that has a stable operation with small output ripple. The two-stage voltage doubler creates the output voltage 4Vdd. The high clock signal is cross-coupled to the input of the second stage with the opposite phase to reduce two switching transistors and capacitors. Simulation results verify that even with a reduced number of transistor and capacitor, there is no circuit performance loss. Adding one capacitor and two switching transistors the circuit can be changed to eight times of Vdd maker.

• Journal of Information Display
• /
• 제6권1호
• /
• pp.12-16
• /
• 2005

Gate and data drivers are essential for driving active matrix display. In this study, we integrate drivers with a-Si:H to develop a compact, better reliability and cost effective display. We design and fabricate drivers with conventional a-Si:H thin film transistors (TFTs). The output voltages are investigated according to the input voltage, temperature and operation time. Based on these studies, we propose here a new driver to prevent gate line from the floated state. For the external coupled voltage fluctuation, the proposed driver shows better stability.

• 한국해양공학회지
• /
• 제16권6호
• /
• pp.1-6
• /
• 2002

The integration of Geographic Information Systems (GIS) with the hydrodynamic model was conducted in order to revitalize the use of geographical information and to aid in the understanding of tidal circulation patterns. A 2D finite difference numerical model was used to simulate n tidal circulation in the Suyoung Bay in Busan, Korea. CIS, especially the ArcView S/W is used to input the data of the numerical model, and is also used for the visualization of model outputs on the ground in the loosely coupled method. In this paper, an electronic navigational chart (ENC), which provides more accurate information in the ocean and coastal areas than any other digital information, is used as a base map for this integration. With the help of GIS, the integration can support th understanding of oceanographic information.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2000년도 종합학술발표회 논문집 Vol.10 No.1
• /
• pp.350-353
• /
• 2000

In this paper, we designed the microstrip patch antenna with L-shaped aperture, which greatly enhances its bandwidth. We optimized to get a maximum bandwidth. The microstrip patch antenna with L-shaped aperture has the widest bandwidth of the conventional aperture coupled microstrip patch antenna. This antenna also has the low-cross polarization level. The effects of changing several key design parameters of the antenna are investigated. We calculated the VSWR, input impedance, and radiation pattern.

• 대한기계학회논문집
• /
• 제18권9호
• /
• pp.2272-2283
• /
• 1994

In scanning tunneling microscopy, the piezoelectric actuator is popuilarly used in stacked type as it can provide remarkable positioning resolution and stiffness. The actuator, however, exhibits a considerable amount of hystereic nonlinearity, resulting in losses of overall measuring accuracy when a linear model is used for its control and calibration, In this study, a nonlinear model is proposed for predicting the precise relationship between the input connand voltage and the output displacement of the actuator itself, cross-coupled electrical behaviours of the driving circuit with the actuator, and mechanical characteristics of the driven components of the actuator. Finally experimental results prove that the nonlinear model enhances the measuring of scanning tunneling microscopy by an order ten in comparison with a conventional linear model.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.496-497
• /
• 2009

In this paper the power flow finite element method (PFFEM) has been used to analyze the vibration of a plate partially covered with a damping sheet. Experiments have been performed to measure the loss factor and frequency response functions of the plate partially covered with the damping sheet. The data for the loss factor has been used as the input data to predict the vibration of the coupled plates with PFFEM. The comparison between the experimental results and the predicted PFFEM results for the frequency response functions has been performed. It showed that PFFEM can be effectively used to predict structural vibration in medium-to-high frequency ranges.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.281-285
• /
• 1996

In this paper, I made visual inspection system using Vision Board and it is consist of an illuminator (a fluorescent lamp), image input device(CCD(Charge)Coupled Device) camera), image processing system(Vision Board(FARAMVB-02), image output device(videomonitor, printer), a measuring instrument(TELMN1000). Length measurement by visual inspection system is used 100mm gauge block instead of calculating distance between camera and object, it measured horizontal and vertical length factor from 400mm to 650mm by increasing 50mm. In this place, measured horizontal and vertical length factor made use of length measurement of a injection. A measuring instrument used to compare a measured length of a injection visual inspection system with it. In conclusion, length measurement of a injection compared a measuring instrument withvisual inspecion system using length factor of 100mm guage block. Maximum error of length compared two devices a measuring instrument with visual inspection system is 0.55mm. And operation program is made up Borland C++ 3.1. By changing, it is applied to various uses.

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권1호
• /
• pp.5-14
• /
• 2005

Continuously variable transmission (CVT) mechanisms combine the functions of a K-H-V type differential gear unit and a V-belt type continuously variable unit (CVU). For the 24 different mechanisms, 12 of them are power circulation modes while the other 12 are power split modes. Some useful theoretical formulas related to speed ratio, power flow and efficiency were derived and analyzed. These mechanisms have many advantages: they decrease CVT size and weight, increase overall efficiency, extend speed ratio range, and generate geared neutral. Compound CVTs were developed by combining the power circulation mode and power split mode, which can offer backward motion, geared neutral, underdrive and overdrive.