• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.457-459
• /
• 2004

The Channel Coding Unit (CCU) is an integral component of Payload Data Transmission System (PDTS) for the Multi-Spectral Camera (MSC) data. The main function of the CCU is channel coding and encryption. CCU has two channels (I & Q) for data processing. The input of CCU is the output of DCSU (Data Compression & Storage Unit). The output of CCU is the input of QTX which modulate data for RF communication. In this paper, there are the overview, short H/W description and operation concept of CCU.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
• /
• pp.121-124
• /
• 2001

This paper proposed resource allocation algorithm for the minimum switching activity of functional unit in high level synthesis process as like DSP which is circuit to give many functional unit. The resource allocation method after scheduling use the power function calculating average hamming distance and switching activity of the between two input. First of all, the switching activity is calculated by the input value after calculating the average hamming distance between operation. In this paper, the proposed method though high If level simulation find switching activity in circuit each functional unit exchange for binary sequence length and value bit are logic one value. To use the switching activity find the allocation with minimal power consumption, the proposed method visits all control steps one by one and determines the allocation with minimal power consumption at each control step. As the existing method, the execution time can be fast according to use the number of operator and max control step. And it is the reduction effect from 6% to 8%.

• 한국정보기술학회 영문논문지
• /
• 제9권2호
• /
• pp.75-87
• /
• 2019

This paper presents a fully digital controlled power supply unit for the wireless controlled dimmable LED lighting system. The proposed power supply designed using a fly-back converter, which is directly controlled by a microprocessor. Although the proposed circuit does not sense the AC input current and has not AC input voltage feed-forward, it can achieve a high power factor. The proposed power supply directly regulates the output power for LED loads using the PWM and PFM control of the fly-back converter without additional regulator. For a wireless remote control function, the Zigbee modem is equipped in the proposed power supply. A prototype set-up has been built and tested. Through the experiment with a prototype set-up, the usefulness of the proposed power supply is verified.

• 전자공학회논문지T
• /
• 제36T권1호
• /
• pp.51-57
• /
• 1999

본 논문은 온도센서 RSD. Pt 100Ω의 감지신호가 Temperature Controller의 릴레이 출력을 발생시키고 PLC 입력접점으로 입력시켜 1Scan Time으로 연산된 PLC 출력을 접점 P030에 Interface Unit를 연결시키므로 부하를 구동시키는 개발장비인 Wired Logic Type Unit에 대해서 기술하였다. 현재 PLC 교육장에서 프로그램 되어진 PLC가 부하를 구동시킬 수 있는 국내의 교육 PLC Test Kit로는 PLC와 부하 사이에 Interface 과정이 무시된 상태에서 PLC의 교육을 하도록 되어있다. 개발 키 트는 이 점을 보안하기 위해서 각종 센서 중 전자에서 언급한 온도 센서 Pt 100Ω을 이용한 온도 제어기의 릴레이 출력이 PLC 입력으로 피드백 되었을 때, 연산된 PLC 출력접점에 WLTU를 삽입시켜 PC, PLC와 부하 사이에 실시간 시스템으로 구동 시킬 수 있는 설비로, PLC 사용의 핵심원리를 쉽게 이해하고 알아 볼 수 있었다. 부하 Interface Unit인 WLTU의 구성은 구동 부분인 유 접점, 무접점, 센서, 지시 등, A접점, B접점 부하인 Motor로 나누었다.

• 전기전자학회논문지
• /
• 제25권1호
• /
• pp.156-167
• /
• 2021

본 논문에서는 5세대 이동통신 네트워크 서비스의 커버리지를 확장하고, 빌딩내에서의 안정적인 무선 네트워크 연결해 주는 5G 광중계기의 인빌딩용 디지털 송수신 유닛 설계를 제안한다. 제안된 5G 광중계기 구동을 위한 디지털 송수신 유닛은 신호처리부, RF 송수신부, 광입출력부, 클록발생부 등의 4개 블록으로 구성된다. 신호처리부는 CPRI 인터페이스의 기본 동작과 4채널 안테나 신호의 조합 및 외부에서의 제어 명령에 대한 응답 등 중요한 역할을 수행한다. 또, JESD204B 인터페이스로 고품질의 IQ 데이터를 송수신 한다. 파워 앰프를 보호하기 위해 CFR, DPD 블록이 동작한다. RF 송수신부는 안테나로부터 수신된 RF 신호를 AD 변환하여 JESD204B 인터페이스로 신호처리부에 전달되고, 신호처리부에서 JESD204B 인터페이스로 전달된 디지털 신호를 DA 변환하여 안테나로 RF 신호를 송신한다. 광입출력부는 전기신호를 광신호로 변환하여 송신하고, 광신호를 전기신호로 변환하여 수신한다. 클록발생부는 광입출력부의 CPRI 인터페이스에서 공급되는 동기 클록의 지터(Jitter)를 억제하고, 신호처리부와 RF 송수신부에 안정적인 동기 클록을 공급한다. CPRI 연결전에는 로컬 클록을 공급하여 CPRI 연결 준비 상태로 동작한다. 본 논문에서 제안된 5G 광중계기 구동을 위한 디지털 송수신 유닛의 정확성을 평가하기 위해서 Xilinx 사의 MPSoC 계열의 XCZU9CG-2FFVC900I를 사용하였고 설계 툴은 Vivado 2018.3을 사용하였다. 본 논문에서 제안된 5G 광중계기 디지털 송수신 유닛이 ADC로 입력되는 5G RF 신호를 디지털로 변환하여 CPRI를 통해 JIG로 전달하는 Uplink 동작과 JIG로부터 CPRI를 통해 전달받은 Downlink 데이터 신호를 DAC로 출력하는 기능과 성능을 평가하였다. 실험결과는 평탄도, Return Loss, Channel Power, ACLR, EVM, Frequency Error 등이 목표로 한 설정 값 이상의 성능이 나타남을 확인 할 수 있었다.

• 물과 미래
• /
• 제25권1호
• /
• pp.93-100
• /
• 1992

Abstract A study on the Derivation of the Unit Hydrograph using Multiple Regression Moe이. The purpose of this study is to deriver an optimal unit hydrograph suing the multiple regression model, particularly when only small amount of data is available. The presence of multicollinearity among the input data can cause serious oscillations in the derivation of the unit hydrograph. In this case, the oscillations in the unit hydrograph ordinate are eliminated by combining the data. The data used in this study are based upon the collection and arrangement of rainfall-runoff data(1977-1989) at the Soyang-river Dam site. When the matrix X is the rainfall series, the condition number and the reciprocal of the minimum eigenvalue of XTX are calculated by the Jacobi an method, and are compared with the oscillation in the unit hydrograph. The optimal unit hydrograph is derived by combining the numerous rainfall-runoff data. The conclusions are as follows; 1)The oscillations in the derived unit hydrograph are reduced by combining the data from each flood event. 2) The reciprocals of the minimum eigen\value of XTX, 1/k and the condition number CN are increased when the oscillations are active in the derived unit hydrograph. 3)The parameter estimates are validated by extending the model to the Soyang river Dam site with elimination of the autocorrelation in the disturbances. Finally, this paper illustrates the application of the multiple regression model to drive an optimal unit hydrograph dealing with the multicollinearity and the autocorrelation which cause some problems.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1051-1059
• /
• 2008

In the development process of an ECU (Electrical Control Unit), numerous tests are necessary to evaluate the performance and control algorithm. The vehicle based test is expensive and requires long time. Also, it is difficult to guarantee the safety of the test driver. To overcome the various problems faced in the development process, the ECU test has been done using HIL (Hardware In the Loop). The HIL environment has the actual hardware including an ECU and a virtual vehicle model. In this paper, the test platform environment is devloped for the AWS ECU black box test. The test platform is built on HIL (Hardware In the Loop) architecture. Using the developed test platform, the control algorithm of the AWS ECU can be evaluated under the virtual driving condition of the bi-modal tram. Driving conditions, such as a front steering angle and vehicle velocity, are defined through the PC (Personal Computer) input. Input signals are transformed to electrical signals in the PC. These signals become the input conditions of the AWS ECU. The AWS ECU is stimulated by arbitory input conditons, and responses of the system are observed.

• 융합정보논문지
• /
• 제9권1호
• /
• pp.136-141
• /
• 2019

본 논문은 Cortex-M4 기반 소형 데이터수집, 융합 및 고속 전송시스템 대해서 기술하였다. 본 논문에서 설계한 데이터 수집 및 전송 시스템은 산업현장에서 발생되는 각종 데이터를 실시간 수집하여 서버 컴퓨터로 직접 자료를 전송할 수 있으며 간단한 필드-프레임을 개발해서 데이터 전송 속도를 향상 시켰다. 또한 각종 센서에서 수집된 여러종류의 데이터를 데이터 수집장치로 쉽게 전달할 수 있도록 디지털 신호 입력부와 아나로그 신호 입력부, 디지털 신호 출력부와 아나로그 신호 출력부가 별도로 구성되도록 설계하였다. 이러한 소형 데이터수집 시스템은 실시간으로 각종 데이터의 수집 및 고속 데이터 전송이 실시되어 산업현장에서 정밀한 제품들의 품질향상에 크게 기여하리라 판단된다.

• 한국기계가공학회지
• /
• 제18권5호
• /
• pp.74-81
• /
• 2019

This study reports the CW $CO_2$ laser scribing of soda lime glass. In this study, scribing experiments are carried out at different laser powers, scan speeds, and focal positions to investigate the effect of the process parameters on the interaction characteristics between a laser beam and glass. In particular, the interaction characteristics are analyzed and described with the input laser energy per unit length. According to the experimental results, the damage threshold for the glass surface was found to exist between 0.072 and 0.08 J/mm. The input laser energy in this region induced partial melting of the surface and grain-shaped cracks. These cracks tended to increase as the input laser energy increased. At the laser input energy larger than 1 J/mm, a huge crack propagating along the scan direction was produced, and the volume below the scribed area was fully melted. The growth of this crack finally resulted in the complete cutting of the glass at the input laser energy above 8 J/mm. It was found that both the width and depth of the scribed line increased with increasing input laser energy. For the beam focusing at the rear surface, the width of the scribed line varied irregularly. This could be ascribed to the increased asymmetry of the beam intensity distribution when the laser beam was focused at the rear surface. Under this condition, a large burr was only produced on one side of the scribed line.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.744-749
• /
• 2005

The train configuration is based on one unit like basic 4 cars to multiple unit operation. Each unit has unique node such as train formation number. Some equipments(TC, CC) of TCMS are connected to the master TC through the LonWorks network. When the train is consist of multiple unit, TCMS has to implement quick network for data communication overall train. But a variable time delay is generated when it is performed communication with point to point type using train formation number. In this paper we propose new method to know the node information of adjacent unit. that is to add digital input signals notifying cab direction at any cabin. Also, we provide the optimized screen design that all collected information via network is displayed by each unit.