• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.4
• /
• pp.122-128
• /
• 2010

On the international provision on prohibition of ocean dumping of waste, tap water sludge has been buried or recycled on th low value added product as landfill. Due to the tap water sludge having high inorganic content, differing from the sewage sludge, it is possible to use as a usable resource by suitable process. We have studied on hydro thermal processing of tap water sludge with phosphoric acid and finally synthesize a artificial zeolite having a deodorization property. To use it as a building material, it has to be solidification. This study is on the properties of artificial zeolite synthsized and solidification properties by various types of solidifier. It is showed that the slaked lime is the best on setting property and its optimum content is 30-60 weight proportion. Solid by solidified by slaked lime has low strength and excellent deodorization performance, so it is possible to use as a functional pannel as gypsum board.

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.6
• /
• pp.701-717
• /
• 2003

The objective of this study was to extensively estimate the air quality trends of the study area by surveying con-centration trends in months or seasons, after analyzing the mass concentration of PM-10 samples and the inorganic lements, ion, and total carbon in PM-10. Also, the study introduced to apply the PMF (Positive Matrix Factoriza-tion) model that is useful when absence of the source profile. Thus the model was thought to be suitable in Korea that often has few information about pollution sources. After obtaining results from the PMF modeling, the existing sources at the study area were qualitatively identified The PM-10 particles collected on quartz fiber filters by a PM-10 high-vol air sampler for 3 years (Mar. 1999∼Dec.2001) in Kyung Hee University. The 25 chemical species (Al, Mn, Ti, V, Cr, Fe, Ni, Cu, Zn, As, Se, Cd, Ba, Ce, Pb, Si, N $a^{#}$, N $H_4$$^{+}$, $K^{+}$, $Mg^{2+}$, $Ca^{2+}$, C $l^{[-10]}$ , N $O_3$$^{[-10]}$ , S $O_4$$^{2-}$, TC) were analyzed by ICP-AES, IC, and EA after executing proper pre - treatments of each sample filter. The PMF model was intensively applied to estimate the quantitative contribution of air pollution sources based on the chemical information (128 samples and 25 chemical species). Through a case study of the PMF modeling for the PM-10 aerosols. the total of 11 factors were determined. The multiple linear regression analysis between the observed PM-10 mass concentration and the estimated G matrix had been performed following the FPEAK test. Finally the regression analysis provided source profiles (scaled F matrix). So, 11 sources were qualitatively identified, such as secondary aerosol related source, soil related source, waste incineration source, field burning source, fossil fuel combustion source, industry related source, motor vehicle source, oil/coal combustion source, non-ferrous metal source, and aged sea- salt source, respectively.ively.y.

• Korean Journal of Environmental Agriculture
• /
• v.16 no.2
• /
• pp.166-169
• /
• 1997

The fresh food waste compost, which was composted in a small bin for average one month, was cured in a pile in the field for seven months. The pile was turned once a month. The various components of the compost were investigated for the curing period. The maximun temperature rised to $65^{\circ}C$ after curing of four months. The moisture content of the compost droped to 61.7% after twelve months. After that, the rainfall affected very much the moisture content of the compost. pH of the compost increased gradually to 8.92 for curing. Ash content rised continually to 60.5% for curing. However, it did not exceed 25% ash content, which is the by-product limit value. The accumulation of the inorganic components occured and most of the heavy matals except for Cd generally were accumulated as curing proceeded.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.7
• /
• pp.683-687
• /
• 2008

When suspended solids are removed by natural sedimentation, it is necessary to use mainly huge equipments and waste great cost. This is a problem that must be solved certainly as soon as possible. In this study, suspended solids of yellow soil water were rapidly removed by controlling pH and amounts of magnetic powder, organic and inorganic flocculants. In the case of the suspended solids of 0.3% yellow soil water, the most excellent turbidity was achieved at pH between 7 and 7.5.

• Resources Recycling
• /
• v.11 no.1
• /
• pp.9-18
• /
• 2002

Printed wiring boards(PWBs) of the obsolete computers are composed of various organic and inorganic compounds as well as metals and alloys. As convinced that the valuable metals obtained from the PWBs are effectively utilized as secondary resources when recovered by economical methods, in this study, an investigation for characterizing the physical separation techniques is conducted. For the recovery of them, the sockets and chips dismantled from PWBs by scraping and residual resin boards are subjected to the appropriate separation processes according to the physical properties of each part. In the case of crushed socket scraps size ranged from -2.36 mm to +1.18 mm, approximately 97 wt% of the product obtained by magnetic separation consists of metallic compounds. In the case of chip scraps, 97% of Fe-Ni alloy and 95% of Cu metal are recovered by the combined process of air classification and dry magnetic separation in the size range from -2.36 mm to +0.15 mm. Ball milling is adopted in order to improve the removal efficiency of the thin-printed metallic materials on the residual resin boards and approximately 77% of Cu metal is recovered by zigzag separation after ball milling.

• Carbon letters
• /
• v.3 no.1
• /
• pp.1-5
• /
• 2002

The regional bio-wastes available in abundance in India were converted into porous carbon by heat treatment at different temperatures from $650-950^{\circ}C$. The wood retain shapes after pyrolysis though shrinkage occured both in axial and radial directions. The shrinkage in radial direction was found to be more than in axial direction in all woods. The density of woods and chars from these at a given temperature has been found to follow linear relationship. Chars were steam activated at temperature $700-800^{\circ}C$ for different times between 45-240 min. Both the temperature and time of activation with steam has a profound effect on surface area. Chars from softwoods like bagasse and castor oil plant were activated at lower temperature, i.e. $700-750^{\circ}C$ whereas hard wood chars have to be activated at higher temperature around $800^{\circ}C$. The morphology of wood as well as of chars has been studied by SEM. The comparison of the two showed that the nature of porosity in chars depends on precursor morphology, nature and physical state of wood and presence of inorganic compounds in the wood. Hard wood results in cross inter connected pores while softwood leads to fibriller structure. The present studies show that activated carbon with reasonably good surface area (${\sim}1000m^2/gm$) can be prepared from soft wood bio-wastes like bagasse and castor oil plant, while surface area ${\sim}1370m^2/gm$ was achieved from hard wood bio waste of pine wood.

• Microbiology and Biotechnology Letters
• /
• v.9 no.3
• /
• pp.145-152
• /
• 1981

Microorganisms from the waste water of starch industry, were isolated and a strain, Y-124, possessing a powerful enzymic activity was selected and identified as a member of the genus Bacillus. The ideal cultural condition for the formation of $\alpha$-amylase form Bacillus Y-124 and its preservation was investigated in connection with the biotechnological and industrial approach to the bulk enzyme production. High yield of $\alpha$-amylase was observed in medium containing casein as well as calcium pantothenate in this work. Calcium ions were found to have an effect in forming this particular enzyme. Ammonium phosphate dibasic was an important inorganic nitrogen source for the formation of $\alpha$-amylase. And preservation of this enzyme was greatly affected by calcium or sodium salts. The addition of calcium carbonate or sodium sulfate presented the most effective result for the prevention of its denaturation to various factors. The above data was obtained with crude enzyme preparation.

• Analytical Science and Technology
• /
• v.16 no.5
• /
• pp.418-425
• /
• 2003

Inorganic elemental content of bottom ash generated from municipal solid waste incinerator was determined by neutron activation analysis. Bottom ash samples were collected monthly from incinerator located in city D, strained out by the 5 mm sieve, dried by oven and pulverized by agate mortar. The samples were irradiated at NAA #1 irradiation hole in HANARO research reactor of Korea Atomic Energy Research Institute and the irradiated samples were measured by HPGe-gamma-ray spectrometer. From the activity of measured nuclides, 33 elements including As, Cr, Cu, Fe, Mn, Sb and Zn were determined applying activity creation formula and nuclear data. The quality control was conducted by simultaneous analysis with NIST standard reference materials.

• Applied Chemistry for Engineering
• /
• v.7 no.3
• /
• pp.518-529
• /
• 1996

To develope chemical heat pump using available energy sources such as solar heat and many kinds of waste thermal energy we have studied the enhancement effect of inserted fins in cylindical packed bed reactor. Two dimensionnal(radial and circumferential) partial differential eqaetions, concerning heat and masstransfer in CaO packed bad, are solved numerically to describe the characteristics of the reaction of fins inserted reactor and heat transfer. The results obtained by numerical analysis about two dimensional profiles of temperature and conversion in the reactant in the packed bed and exothermic heat amount released from the reactor are follows; -. The insertion of fins in reactor can redue the reaction completion time by half. -. The rate of thermochemical reaction depends of the temperature and concentration and it is also governed by the boundary conditions and heat transfer rate in the particle packed bed.

• Applied Chemistry for Engineering
• /
• v.7 no.6
• /
• pp.1181-1191
• /
• 1996

To develope chemical heat pump, which is operated by heat of high temperature using available energy sources such as solar heat and many kinds of waste thermal energy we have studied theoretically the enhancement effects of inserted fins on the rate of heat transfer and reaction in cylinderical $Ca(OH)_2$ packed bed reactor. The results obtained by numerical analysis about profiles of temperature, completion time of reaction and exothermic heat amount released from the reactor read as the inserted copper fins in reator reduce the completion time of dehydration reaction in packed bed by half, and the rate of thermochemical reaction depends on the temperature and concentration, and it is also governed by the boundary conditions and the rate of heat transfer in the particle packed bed.