• Journal of Preventive Medicine and Public Health
• /
• v.26 no.4 s.44
• /
• pp.587-598
• /
• 1993

Hydrofluoric acid is one of the strongest irritating, corrosive and poisonous inorganic chemicals. Hydrofluoric acid burns are occurring with ever-increasing frequency due to the wide use of this acid in industries. Hydrofluoric acid burns are characterized by severe progressive tissue destruction and excruciating pain due to the unique properties of the freely dissolvable fluoride ion. The authors reviewed medical records of 32 cases (36 spells) of hydrofluoric acid burns which occurred in a hydrofluoric acid manufacturing factory from Sep. 1, 1990 to June 30, 1993. The results are as follows; 1. Eleven measurements of air concentrations of hydrofluoric acid by detection tube method from 1990 to 1992 were all below TLV (Department of Labor, R.O. K). 2. There were 19 cases (22 spells) of hydrofluoric acid burns which occurred during the study period among regular employees. The overall incidence density of hydrofluoric acid was 17.8 cases (20.6 spells) per 100 person-year. Incidence density was 19.0 cases (22.0 spells) per 100 person-year among male workers and there were no female cases. Incidence density was 32.9 cases (38.3 spells) per 100 person-year among production workers and 1.9 cases (1.9 spells) per 100 person-years among management workers with the difference being statistically significant (P<0.01). 3. Of 32 cases (36 spells) of hydrofluoric acid burns among workers who were regularly employed or temporarily employed, 26 spells (81.2%) were between age 20 to 39. In 15 spells(41.7%) burns occurred between 12:00 and 17:59 with 16 spells(44.3%) having arrived at hospital within 2 hours after the accident. 4. Of 36 spells, the main cause of hydrofluoric acid burns were by splashes (8 spells, 22.2 %). The most frequent site of burns were fingers and pain was the most frequent symptom. Thirty spells (83.3%) of the hydrofluoric acid burns were treated with local injection of antidote (calcium gluconate). Complete recovery without scarring were observed in most of the cases (34 out of 36 cases, 94.4%). The study results suggest that to prevent hydrofluoric acid burns, environmental control and the wearing of hydrofluoric acid resistant protective clothes and gloves are important. It is also stressed that establishment of an emergency management and a transfer system for hydrofluoric acid burn victims is necessary.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.12
• /
• pp.1717-1724
• /
• 2004

The study was conducted to determine the effect of Salmonella typhymurium lipopolysaccharide (LPS) challenge on egg-laying performance, inflammatory response, zinc metabolism in layer fed diets supplemented with organic or inorganic zinc since 3-wk-old. The three dietary treatments were corn-soybean meal basal diet without supplemental zinc or with supplemental zinc at 60 mg/kg zinc from $ZnSO_4$ or zinc amino acid complex (ZnAA). At the age of 58 wk-old, twelve hens from each dietary treatment were allotted into two sub-groups. On day 1, 3, 5, 7 of the $58^{th}$ week of age, six birds of one sub-group were injected intraperitoneally (i.p.) with 2 ml LPS (1.0 $\ell$/ml) or sterile saline. Neither zinc source ${\times}$ immune challenge interaction nor zinc source effect on egg production performance was observed (p>0.05), LPS-challenge decreased egg production (p<0.04) and increased percentage of cracked eggs (p <0.01). With LPS challenged, the fever response of hens fed ZnAA peaked and subsided earlier than in hens fed $ZnSO_4$ or basal diet. Serum IL-1$\beta$ at 3 h was higher (p<0.01), but lower (p<0.001) at 12 h post-challenge with LPS in hens fed ZnAA than $ZnSO_4$. In salinetreated groups, serum IL 1$\beta$ was higher in hens fed ZnAA than the basal diet at 3 h post-injection (p<0.01). LPS-challenged birds had lower serum zinc and higher zinc sequestered in liver and spleen (p<0.001). In saline-treated birds, there was no difference in zinc concentration of serum, liver and spleen among different dietary treatments (p>0.05). Supplementation of 60 mg/kg zinc from either ZnAA or $ZnSO_4$ significantly (p<0.05) elevated metallothionein (MT) concentration in liver and spleen. MT concentration in liver of birds fed ZnAA diet was higher than in those fed $ZnSO_4$ diet (p<0.05). The magnitude of increase of hepatic and splenic MT due to LPS challenge was higher by supplementation of ZnAA than $ZnSO_4$. The results suggest that zinc amino acid complex enhanceed MT synthesis and zinc sequestered in liver and spleen and increased the sensitivity to immune response due to LPS challenge.

• Journal of the Korean Vacuum Society
• /
• v.17 no.6
• /
• pp.538-543
• /
• 2008

Recently a nano-scale diamond is possible to manufacture forms of powder(below 100 nm) by new processing of explosion or deposition method. Using a sintering of nano-scale diamond is possible to manufacture of grinding tools. We have need of a processing development of coated uniformly inorganic to prevent an abnormal grain growth of nano-crystal and bonding obstacle caused by sintering process. This paper, in order to improve the sintering property of nano-scale diamond, we coated ZnO thin films(thickness: $20{\sim}30\;nm$) in a vacuum by ALD(atomic layer deposition) Economically, in order to deposit ZnO all over the surface of nano-scale diamond powder, we used a new modified fluidized bed processing replaced mechanical vibration effect or fluidized bed reactor which utilized diamond floating owing to pressure of pulse(or purge) processing after inserted diamond powders in quartz tube(L: 20 mm) then closed quartz tube by porosity glass filter. We deposited ZnO thin films by ALD in closed both sides of quartz tube by porosity glass filter by ALD(precursor: DEZn($C_4H_{10}Zn$), reaction gas: $H_2O$) at $10^{\circ}C$(in canister). Processing procedure and injection time of reaction materials set up DEZn pulse-0.1 sec, DEZn purge-20 sec, $H_2O$ pulse-0.1 sec, $H_2O$ purge-40 sec and we put in operation repetitive 100 cycles(1 cycle is 4 steps) We confirmed microstructure of diamond powder and diamond powder doped ZnO thin film by TEM(transmission electron microscope) Through TEM analysis, we confirmed that diamond powder diameter was some $70{\sim}120\;nm$ and shape was tetragonal, hexagonal, etc before ALD. We confirmed that diameter of diamond powders doped ZnO thin film was some $70{\sim}120\;nm$ and uniform ZnO(thickness: $20{\sim}30\;nm$) thin film was successfully deposited on diamond powder surface according to brightness difference between diamond powder and ZnO.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.10
• /
• pp.1446-1451
• /
• 2010

Silk sericin protein was hydrolyzed by seven proteolytic enzymes to examine the effectiveness of the hydrolysates to bind iron. The amino acid nitrogen contents of hydrolysates by Flavourzyme were higher than the others enzymes, and its iron binding capacity showed dose-dependent increase. The bioavailability of iron binding peptide from sericin hydolysates was investigated in iron-deficient rats. Three-week-old male rats were fed iron-deficient diet for three weeks. Rats were divided into four groups (DD: no treated group on iron deficient diet, DD+HI: heme-iron treated group, DD+OI: sericin-Fe, and DD+II: inorganic iron ($FeSO_4$) treated group, and then iron supplemented by injection for one week. After oral administration for one week, the iron contents of serum and liver were significantly higher in DD+OI ($4.2\;{\mu}g/mL$ and $80.1\;{\mu}g/mL$) and DD+HI ($3.2\;{\mu}g/mL$ and $70.6\;{\mu}g/mL$) than DD ($2.0\;{\mu}g/mL$ and $47.9\;{\mu}g/mL$). Hemoglobin content of treated groups was significantly higher than DD, but the significant difference among groups was not shown. Aspartate aminotransferase (AST) and alanine aminotransferase (ALT) levels did not show any significant difference among all groups. Binding iron to peptide from sericin hydolysates seems to improve its bioavailability and to hasten the cure of iron deficiency in experimental rat.

• Economic and Environmental Geology
• /
• v.50 no.3
• /
• pp.215-224
• /
• 2017

Arsenic (As) is known to be the most toxic element and frequently detected in groundwater environment. Inorganic As exists as arsenite [As(III)] and arsenate [As(V)] in reduced and oxidized environments, respectively. It has been reported that the toxicity of arsenite is much higher than that of arsenate and furthermore arsenite shows relatively higher mobility in aqueous environments. For this reason, there have been numerous researches on the process for oxidation of arsenite to arsenate to reduce the toxicity of arsenic. In particular, photooxidation has been considered to be simple, economical, and efficient to attain such goal. This study was conducted to evaluate the applicability of naturally-occurring goethite as a photocatalyst to substitute for $TiO_2$ which has been mostly used in the photooxidation processes so far. In addition, the effects of several factors on the overall performance of arsenite photocatalytic oxidation process were evaluated. The results show that the efficiency of the process was affected by total concentration of dissolved cations rather than by the kind of those cations and also the relatively higher pH conditions seemed to be more favorable to the process. In the case of coexistence of arsenite and arsenate, the removal tendency by adsorption onto goethite appeared to be different between arsenite and arsenate due to their different affinities with goethite, but any effect on the photocatalytic oxidation of arsenite was not observed. In terms of effect of humic acid on the process, it is likely that the higher concentration of humic acid reduced the overall performance of the arsenite photocatalytic oxidation as a result of competing interaction of activated oxygen species, such as hydroxyl and superoxide radicals, with arsenite and humic acid. In addition, it is revealed that the injection of oxygen gas improved the process because oxygen contributes to arsenite oxidation as an electron acceptor. Based on the results of the study, consequently, the photocatalytic oxidation of aqueous arsenite using goethite seems to be greatly feasible with the optimization of process.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.36 no.3
• /
• pp.115-127
• /
• 2018

This study was attempted to find out the value of cultural assets through the clear diagnosis and prescription of the dead and weakness factors of the Population of Retusa Fringe Trees in Pyeongji-ri, Jinan(Natural Monument No. 214), The results are as follows. First, Since the designation of 13 natural monuments in 1968, since 1973, many years have passed since then. In particular, despite the removal of some of the buried soil during the maintenance process, such as retreating from the fence of the primary school after 2010, Second, The first and third surviving tree of the designated trees also have many branches that are dead, the leaves are dull, and the amount of leaves is small. vitality of tree is 'extremely bad', and the first branch has already been faded by a large number of branches, and the amount of leaves is considerably low this year, so that only two flowers are bloomed. The second is also in a 'bad'state, with small leaves, low leaf density, and deformed water. The largest number 1 in the world is added to the concern that the s coverd oil is assumed to be paddy soils. Third, It is found that the composition ratio of silt is high because it is known as '[silty loam(SiL)]'. In addition, the pH of the northern soil at pH 1 was 6.6, which was significantly different from that of the other soil. In addition, the organic matter content was higher than the appropriate range, which is considered to reflect the result of continuous application for protection management. Fourth, It is considered that the root cause of failure and growth of Jinan pyeongji-ri Population of Retusa Fringe Trees group is chronic syndrome of serious menstrual deterioration due to covered soil. This can also be attributed to the newly planted succession and to some of the deaths. Fifthly, It is urgent to gradually remove the subsoil part, which is estimated to be the cause of the initial damage. Above all, it is almost impossible to remove the coverd soil after grasping the details of the soil, such as clayey soil, which is buried in the rootstock. After removal of the coverd soil, a pestle is installed to improve the respiration of the roots and the ground with Masato. And the dead 4th dead wood and the 5th and 6th dead wood are the best, and the lower layer vegetation is mown. The viable neck should be removed from the upper surface, and the bark defect should undergo surgery and induce the development of blindness by vestibule below the growth point. Sixth, The underground roots should be identified to prepare a method to improve the decompression of the root and the respiration of the soil. It is induced by the shortening of rotten roots by tracing the first half of the rootstock to induce the generation of new roots. Seventh, We try mulching to suppress weed occurrence, trampling pressure, and soil moisturizing effect. In addition, consideration should be given to the fertilization of the foliar fertilizer, the injection of the nutrients, and the soil management of the inorganic fertilizer for the continuous nutrition supply. Future monitoring and forecasting plans should be developed to check for changes continuously.