• 한국해양학회지
• /
• v.27 no.2
• /
• pp.91-100
• /
• 1992

For the study on the structure and characteristics of the primary production system in the southern waters of the East Sea, chlorophyll, phytoplankton standing stocks. nutrients and hydrographic properties were investigated and analyzed in conjunction with measurement of C-14 based primary productivity. The primary productivity was relatively high in comparison with the previous studies, ranging from 284 to 4,574 mgC$.$m/SUP -2/$.$day /SUP -1/ and averaged to be 2,000 mgC$.$m/SUP 02/$.$day/SUP -1/. The standing stocks within the euphotic zone were fairly high, but ambient inorganic nitrogenous nutrient concentrations were too low to support the high production. This implied that there might be active recycling of nitrogenous nutrients by heterotrophic processes and the upward flux of nutrients by vertical mixing. Subsurface chlorophyll maxima were continuously observed in the lower parts of the euphotic layer and the depth coincided with the nutricline rather than isopycnal surfaces, supporting the view that chlorophyll distributions and primary production were primarily influenced by nutrient supply. Despite low nutrient concentrations, phytoplankton standing stocks and production were fairly high and the fraction of autotrophic nano- and picoplankton production was significant.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.5
• /
• pp.522-526
• /
• 2006

To investigate the characteristics of rainwater in Daegu area, parameters such as pH, electrical conductivity, TOC, TIC and TC were analyzed on 34 samples from January to December 2005. Results revealed that higher values were measured in winter than in summer. Furthermore samples that originated from industrial and commercial areas had higher chemical concentrations and conductivity as compared with those from residential and reference areas. Seldom acid-rain occurrence was recorded(27.2%) as compared with non-acid precipitation(72.8%) incidence. Also higher organic carbon fraction(TOC) was detected(72.5%) than inorganic form(TIC)(27.5%) in terms of component ratio with TC. During frequent rainfalls, the concentration of chemicals was decreased to a degree. Conversely, lower rate of rainfall gave out higher chemical values. Thereby the improvement of air qualify in 2005 compare with 2003 report was influenced by the environment authorities' efforts to reduce air pollutions and various factors by the depression of the region's economy.

• Journal of the Korea Concrete Institute
• /
• v.25 no.2
• /
• pp.209-215
• /
• 2013

This study is aimed to identify the method to use the CaO-$Al_2O_3$ system of rapidly cooled steel making slag (RCSS) as the environment-friendly inorganic accelerating agent by analyzing its physical and chemical properties. The fraction of rapidly cooled steel making slag is distinguished from its fibrous, and the contents of CaO and $Fe_2O_3$ are inversely proportional across different fractions. In addition, as the content of CaO decreased and the content of $Fe_2O_3$ increased, the loss ignition tended to become negative (-) and the density increased. The pore distribution by mercury intrusion porosimetry is very low as compared to the slowly cooled steel-making slag, which indicates that the internal defect and the microspore rate are remarkably lowered by the rapid cooling. To analyze the major minerals the rapidly cooled steel-making slag, XRD, f-CaO quantification and SEM-EDAX analysis have been performed. The results shows that f-CaO does not exist, and the components are mainly consisted of $C_{12}A_7$ and reactive ${\beta}-C_2S$.

• Composites Research
• /
• v.16 no.1
• /
• pp.1-12
• /
• 2003

This study developed SiC$_{p}$/A1$_2$O$_3$$_{f}$/Al composites for electronic packaging to which reinforcements were added with the volume fractions of 49%, 56% and 63% by the squeeze casting method. 0.8 wt. % of the inorganic binder as well as the A1$_2$O$_3$ fiber and SiC Particles with the volume fraction of 1:10 were added to the composites, which were produced in the newly designed mold. For the produced SiC/Al composites, the CTEs (coefficients of thermal expansion) were measured from 30 to 300 and compared with the FEM numerical simulation to analyze the temperature dependent properties. The experiment showed the CTEs of SiC$_{p}$/A1$_2$O$_3$$_{f}$/Al composites that were intermediate values of those of Rule of Mixture and Turner's Model. The CTEs were close to Turner's Model in the room temperature and approached the Rule of Mixture as the temperature increases. These properties analyzed from the difference of the average stress acting between the matrix and the reinforcements proposed in this study.

• Applied Biological Chemistry
• /
• v.43 no.3
• /
• pp.163-168
• /
• 2000

To remove phosphate accumulated in the soil and water, Acinetobacter lwoffi PO8 possessing a high ability to accumulate phosphate was isolated from a active sludge. Bacterium was cultured in the liquid medium containing $150\;{\mu}g/mL$ of phosphate at $30^{\circ}C$ in different culture conditions to examine intracellular phosphate uptake. The initial pH in the range of $7.5{\sim}8.5$ was effective on the growth and phosphate uptake of the strain. Glycerol and arabinose used as a carbon sources showed 93 and 91% the phsphate uptake, respectively. Among the nitrogen sources, ammonium salt such as $NH_4NO_3$ and $(NH_4)_2SO_4$ was effectively utilized on the phosphate uptake compared with amino compounds. The rate of phosphate uptake of $NH_4NO_3$, and $(NH_4)_2SO_4$, was 95 and 96%, respectively The growth and Phosphate uptake ability in the strain were significantly promoted when metal ions were added in the medium; $Co^{2+}$, however, was not utilized by the strain. The capacity of phosphate uptake was enhanced to $10{\sim}20%$ when arginine, methionine, or lysine was added. Using $^{32}P$ to examine the uptake Pattern of intracellular phosphate, experiment result showed that polyphosphate was largely found in the fraction of intracellular inorganic phosphate of Acinetobacter lwoffi PO8.

• Elastomers and Composites
• /
• v.55 no.4
• /
• pp.306-313
• /
• 2020

To investigate the reinforcing effects of functional fillers in nitrile rubber (NBR) materials, high-structure carbon black (HS45), coated calcium carbonate (C-CaCO3), silica (200MP), and multi-walled carbon nanotubes (MWCNTs) were used as functional filler, and carbon black (SRF) as a common filler were used for oil-resistant rubber. The curing and mechanical properties of HS45-, 200MP-, and MWCNT-filled NBR compounds were improved compared to those of the SRF-filled NBR compound. The reinforcing effect also increased with a decrease in the particle size of the fillers. The C-CaCO3-filled NBR compound exhibited no reinforcing effect with increasing filler concentration because of their large primary particle size (2 ㎛). The reinforcing behavior based on 100% modulus of the functional filler based NBR compounds was compared by using several predictive equation models. The reinforcing behavior of the C-CaCO3-filled NBR compound was in accordance with the Smallwood-Einstein equation whereas the 200MP- and MWCNT-filled NBR compounds fitted well with the modified Guth-Gold (m-Guth-Gold) equation. The SRF- and HS45-filled NBR compounds exhibited reinforcing behavior in accordance with the Guth-Gold and m-Guth-Gold equations, respectively, at a low filler content. However, the values of reinforcement parameter (100Mf/100Mu) of the SRF- and HS45-filled NBR compounds were higher than those determined by the predictive equation model at a high filler content. Because the chains of SRF composed of spherical filler particles are similarly changed to rod-like filler particles embedded in a rubber matrix and the reinforcement parameter rapidly increased with a high content of HS45, the higher-structured filler. The reinforcing effectiveness of the functional fillers was numerically evaluated on the basis of the effectiveness index (��SRF/��f) determined by the ratio of the volume fraction of the functional filler (��f) to that of the SRF filler (��SRF) at three unit of reinforcing parameter (100Mf/100Mu). On the basis of their effectiveness index, MWCNT-, 200MP-, and HS45-filled compounds showed higher reinforcing effectiveness of 420%, 70%, and 20% than that of SRF-filled compound, respectively whereas C-CaCO3-filled compound exhibited lower reinforcing effectiveness of -50% than that of SRF-filled compound.

• Radiation Oncology Journal
• /
• v.9 no.1
• /
• pp.1-6
• /
• 1991

The effect of 2-deoxy-d-glucose (2-DDG) on $C_3H$ mouse fibrosarcoma(FSall) was studied. Metabolic status, especially for energy metabolism, was studied using in vivo $^{31}P$-MRS, proliferative capacity was observed on flow cytometry(FC) and growth rate was measured after transplantation of $10^6$ viable tumor cells in the dorsum of foot of $C_3Hf/Sed$ mice. One gram of 2-DDG Per kg of body weight was injected intraperitoneally on 12th day of implantation. Average tumor size on 12th day of implantion was $250mm^3$. Growth rate of Fsall tumor was measured by tumor doubling time and slope on semilog plot. After 2-DDG injection, growth rate slowed down. Tumor doubling time between tumor age 5-12 days was 0.84 days with slope 0.828 and tumor doubling time between tumor age 13-28 days was 3.2 days with slope 0.218 in control group. After 2-DDG injection, tumor doubling time was elongated to 5.1 days with slope 0.136. The effect of 2-DDG studied in vivo $^{31}P$-MRS suggested that the increase of phosphomonoester (PME) and inorganic phosphate (Pi) by increasing size of tumor, slowed down after 2-DDG injection. Flow cytometry showed significantly increased S-phase and $G_2+M$ phase fraction suggesting increased proliferative capacity of tumor cells in the presence of 2-DDG. Authors observed an interesting effect of 2-DDG on FSall tumor and attempt to utilize as an adjunct for radiotherapy.

• Korean Journal of Soil Science and Fertilizer
• /
• v.21 no.3
• /
• pp.272-279
• /
• 1988

A pot experiment was conducted to define the effect of various soil phosphorus fractions for soybean yield and the relations of between various soil phosphorus fraction and each other in 11 upland soils with different capacities of phosphorus fixation and physico-chemical properties of soils. The effect of phosphorus fertilization was high in soils with high capacities of phosphorus fixation and low available phosphorus, and soybean yield was showed significant relationship with available phosphorus and inorganic soil phosphorus fractions. Fractional recovery of added phosphorus in soils were showed various range of 2.5-91.7%, and mean value of soils was 48.5%. In the relationships among the soybean yield, plant phosphorus content, phosphorus uptake and available phosphorus, inoganic phosphorus at flowering stage, soybean yield were showed significant relationship with available phosphorus content, phosphorus uptake were all showed significant correlation without Fe-P, but Fe-P was showed except Jeju soil. Al-P/Fe-P ratio was increased by phosphorus fertilization in soils at flowering stage, and in the relationships between Al-P/Fe-P ratio and soybean yield, phosphorus uptake, soil and plant phosphorus were showed high significant correlation, but Fe-P was not showed at flowering stage. P sorbed by soils from P 20ppm solution was decreased by phosphorus fertilization, and then decreasing rate was higher in soils with low capacity of phosphorus fixation then high phosphorus fixing soils. Also P sorbed was showed negatively high significant correlation with available phosphorus, plant phosphorus, phosphorus uptake and soil inorganic phosphours except Fe-P, and soybean yield was not showed.

• Applied Biological Chemistry
• /
• v.13 no.1
• /
• pp.43-50
• /
• 1970

To study the productivity of single cell protein from the petroleum hydrocarbon utilizing yeasts, 242 soil samples, such as oil soaked soil of gas stations and garage, coal, farm soil, and sewage, from 135 places in Korea were collected. From these samples 468 yeast strains which utilize petroleum hydrocarbon as a sole organic carbon source were isolated and identified by observing the growth rates. For the identified strains optimum culture conditions were determined and analysis of cell components were performed. 1. 90.8% of petroleum hydrocarbon utilizing yeast strains were found from oil soaked soil and about 10% from coal, farm soil and sewage etc. 2. The yeast strain of the highest cell productivity was isolated from oil soaked soil and was identified as Candida curvata HY-69-19. 3. The optimum culture conditions for the selected yeast strain were found to be pH 5.0, $28^{\circ}C$ and affluent aerated state. 4. Candida curvata HY-69-19 was found to utilize favorably the heavy gas oil fractionated at above $268.9^{\circ}C$ as carbon source and urea as inorganic nitrogen source. 5. The growth curve of this strain on heavy gas oil medium showed that the yeast has a lag phase up to 18 hours and logarithmic growth phase between 24 to 42 hours. Generation time was found to be between 3.8 and 4.5 hours during the logarithmic growth phase. 6. About 300 mg dried cells per heavy gas oil was harvested under the culture conditions of adjusted pH to 5.0 at time intervals of 6 hours for 54 hours and heavy gas oil urea for shaking culture medium. 7. Chemical composition of the yeast cell was found to be 40.25%, 14.81%, 24.32% and 10.63% for crude protein, crude lipid, carbohydrate and ashes, respectively.

• Analytical Science and Technology
• /
• v.29 no.1
• /
• pp.19-28
• /
• 2016

The objective of this study was to determine the acidification of precipitation in the Jeju area. Precipitation samples were collected from the Jeju area from 2009-2014, and the major ionic species were analyzed. In the regression analysis, through a comparison of ion balance, electric conductivity, and acid fraction, the correlation coefficients showed a good linear relationship within the range of 0.927~0.983. The volume-weighted means of the pH and electric conductivity were 4.9 and 22.7 µS/cm, respectively. The ionic strength of precipitation was 0.27±0.38 mM, indicating about 35.9 % of total precipitation within the pure precipitation criteria. The volume-weighted mean concentrations (ìeq/L) of the ionic species in the precipitation were in the order of Na⁺ > Cl⁻ > nss-SO₄²⁻ > NO₃⁻ > NH₄⁺ > Mg²⁺ > H⁺ > nss-Ca²⁺ > PO₄³⁻ > K⁺ > HCOO⁻ > CH₃COO⁻ > NO₂⁻ > F⁻ > HCO₃⁻ > CH₃SO₃⁻ . The acidification contributions by sulfuric and nitric acids were 54.5 % and 36.5 %, respectively. Meanwhile the acidification contributions by formic and acetic acids were 4.8 % and 4.2 %, respectively. Thus, it was found that the acidification of the precipitation in the Jeju area was mainly due to the inorganic acids. The neutralization factors by NH₃ and CaCO₃ were also 33 % and 20 %, respectively.