• Korean Journal of Environmental Biology
• /
• v.36 no.4
• /
• pp.665-671
• /
• 2018

This paper represents an investigation into the pattern of carbon transportation and composition on an open estuary in the transition zone between the river and marine environment in Tamjin River where stream water flows into the Gangjin Bay. To conduct the study, seven plots were established along an environmental gradient from river and estuary to the ocean. Surface water samples were collected thrice during the summer rainfalls and non-flooding seasons in 2017. The samples were then measured for the concentrations of dissolved organic carbon ([DOC]), particulate organic carbon ([POC]) and dissolved inorganic carbon ([DIC]). An analysis of the results showed that [POC] did not increase in the river even during the summer rainfall. However, [DOC] increased resulting in a higher [DOC]:[POC] ratios for the non-flooding season compared to summer rainfall events. On the other hand, the marine site of the estuary bay showed the highest [DIC] which was stable relative to those of river sites. The results suggest that in an open estuary zone, river and ocean supplied the open estuary zone with different types of carbon materials; mainly DOC supplied from the river and DIC sourced from the ocean.

• Polymer(Korea)
• /
• v.37 no.3
• /
• pp.342-346
• /
• 2013

In this study, it was attempted to disperse carbon nanotubes (CNTs) in a polymer matrix using a twin-screw extruder which was good for dispersing fillers of micron sizes but not suitable for dispersing nanometer-sized materials. Improved dispersion of CNTs could be achieved by the addition of inorganic fillers with different geometrical shapes. An increase in the matrix viscosity provided a high shear stress on aggregated CNTs, leading to a good dispersion of CNTs. The presence of the inorganic fillers was supposed to suppress the re-aggregation of CNTs in the regions where a lower shear stress was applied. As a result, the CNTs dispersion was well stabilized.

• Elastomers and Composites
• /
• v.20 no.1
• /
• pp.13-24
• /
• 1985

It is generally agreed that strong linkages exist between rubber chains and reinforcing filler particles. The purpose of this study is to examine the effect of rubber-filler attachments on the various mechanical properties of the rubber. In particular, the modulus and strength will be altered by these attachments. For this study, the curing properties are examined by means of ODR (Oscillating Disk Rheometer), the physical properties by means of Instrong. The results of this study can be summarized as follows. In the ODR test, the carbon black filled stock has shorter scorch time than gum stock and, the silica and clay filled stock has longer scorch time than gum stock. In the modulus, ten sile and swelling properties, the vulcanizates filled with carbon black had higher those values than inorganic filler loaded NR vulcanizates, but the rebound rate showed that the silica filled NR vulcanizates was lower than other inorganic filler contained NR vulcanizates and the ISAF filled NR vulcanizates was lower than other carbon block contained NR vulcanizates.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.1
• /
• pp.76-82
• /
• 2014

1-Methylimidazole-2-thiol, as a kind of mercaptans, is a typical organic pollutant which has not been efficiently removed. In this study, titanium dioxide ($TiO_2$) photocatalyst based on magnetic multi-walled carbon nanotubes (MWCNTs) was synthesized via hydrothermal and sol-gel methods. The as-prepared photocatalyst was extensively characterized by X-ray diffraction (XRD), X-ray energy diffraction spectrum (EDS), transmission electron microscope (TEM), Fourier transform infrared (FT-IR) spectra, UV-Vis diffuse reflectance spectra (UV-vis DRS) and vibrating sample magnetometer (VSM). This photocatalyst of $TiO_2$/$Fe_3O_4$/MWCNTs was proved to exhibit high photocatalytic efficiency and the photodegradation rate could reach nearly 82.7% for the degradation of 1-methylimidazole-2-thiol under ultraviolet irradiation. In addition, the results demonstrated that inorganic ions had a negative impact on photodegradation of 1-methylimidazole-2-thiol to varying degrees. Moreover, pH had a great and complex effect on photocatalytic degradation of 1-methylimidazole-2-thiol under ultraviolet irradiation.

• Resources Recycling
• /
• v.20 no.2
• /
• pp.3-15
• /
• 2011

Current, Registration fields of CDM projects are being conducted in a variety of parts such as mostly energy, chemical processing and manufacturing processes. However, there are not many CDM project registrations by recycling of inorganic waste. In this paper, analysis abroad CDM project and applications in order to review possibility of CDM project registration through the recycling of domestic inorganic waste were investigated. As a results, registered case of CDM project by inorganic waste recycling was researched to registrate in raw material alternative field of cement industry that inorganic waste can be used in large quantities. Application prospects of CDM project in Korea will be possible to analysis industrial scale, industry using inorganic raw materials, green house gas emissions and inorganic waste generated in large quantities.

• The Korean Journal of Mycology
• /
• v.48 no.3
• /
• pp.273-284
• /
• 2020

Calocybe indica is an edible mushroom commercially cultivated in India and other tropical countries. In this study, the culture characteristics and optimal conditions of milky mushroom strains were determined. The growth temperature and pH range of milky mushrooms was extensively investigated between 15-35 ℃ and pH 3-11. For efficient cultivation, 20 types of nutrient sources were selected that consisted of one of 21 types of carbon sources, 6 organic nitrogen sources, 6 inorganic nitrogen sources, 13 amino acids, 6 organic acids and 12 inorganic salts. The impact of each of the selected nutrition sources and their concentration on growth was investigated. The optimum pH and temperature were determined to be pH 6.0 and 15 ℃, respectively. The optimum concentration of medium elements for the mycelial growth of C. indica was determined to be as follows: carbon source, 2% maltose; organic nitrogen source, 1% yeast extract; inorganic nitrogen source, 0.1% NaNO₃; amino acid, 0.7% asparagine; organic acid, 0.07% acetic acid; inorganic salt, 0.07 mM MnSO₄.

• Korean Chemical Engineering Research
• /
• v.62 no.3
• /
• pp.233-237
• /
• 2024

This study is about the fabrication of a flexible electrode based on PAN-based carbon fibers tow using organic/inorganic nanocomposite and its application of non-enzymatic sensor. The organic/inorganic nanocomposite was composed of the conductive polymer polyaniline (PANI) and the metal oxide CuO. And glucose was used as the target of the electrochemical sensor. Commercialized CFTs were pretreated through heat treatment for desizing and electrochemical oxidation for activation. This nanocomposite was sequentially synthesized on the pretreated CFT surface using electrochemical polymerization and electrochemical deposition. Finally, the CFT/PANI/CuO NPs electrode was obtained. The electrochemical properties and sensing performance of the CFT/PANI/CuO NPs electrode were analyzed using chronoamperometry (CA), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). The sensitivity of the CFT/PANI/CuO NPs electrode was about 8.352 mA/mM (in a linear range of 0.445~6.674 mM) and 3.369 mA/mM (in a linear range of 6.674~50 mM), respectively. So, the CFT/PANI/CuO NPs electrode exhibited the enhanced sensing performances due to unique properties such as small peak potential separation, low electron transfer resistance, and large specific surface area.

• Journal of odor and indoor environment
• /
• v.17 no.4
• /
• pp.372-380
• /
• 2018

To abate the problem of odor from restaurants, a hybrid adsorbent consisting of organic and inorganic materials was developed and evaluated using acetaldehyde as a model compound was deveioped and evaluated. Powders of activated carbon, bentonite, and calcium hydroxide were mixed and calcinated to form adsorbent structure. The surface area of the hybrid adsorbent was smaller than that of high-quality activated carbon, but its microscopic image showed that contours and pores were developed on its surface. To determine its adsorption capacity, both batch isotherm and continuous flow column experiments were performed, and these results were compared with those using commercially available activated carbon. The isotherm tests showed that the hybrid adsorbent had a capacity 40 times higher than that of the activated carbon. In addition, the column experiments revealed that breakthrough time of the hybrid adsorbent was 2.5 times longer than that of the activated carbon. These experimental results were fitted to numerical simulations by using a homogeneous surface diffusion model (HSDM); the model estimated that the hybrid adsorbent might be able to remove acetaldehyde at a concentration of 40 ppm for a 5-month period. Since various odor compounds are commonly emitted as a mixture when meat is barbecued, it is necessary to conduct a series of experiments and HSDM simulations under various conditions to obtain design parameters for a full-scale device using the hybrid adsorbent.

• Membrane Journal
• /
• v.7 no.1
• /
• pp.11-14
• /
• 1997

Two membrane-rdated research projects are now being developed in Japan and their main target is to develop new inorganic membranes. The first project is the R & D of membranes for carbon dioxide recovery at high temperature, conducted by the Japan Fine Ceramics Center (JFCC) and Japan Fine Ceramics Association (JFCA) under the supervision by the New Energy and Industrial Technology Development Organization (NEDO). The second one is the R & D of membranes for petroleum refinery and chemical processes, conducted by the Japan High Polymer Center (JHPC) under the supervision by the Petroleum Energy Center (PEC). Cooperating with these projects researchers in many universities and research institutes have been publishing many interesting data of inorganic membranes manufactured by various methods. Many such results are summarized and reported.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1995.09a
• /
• pp.15-20
• /
• 1995

Two membrane-related research projects are now being developed in Japan and their main target is to develop new inorganic membranes. The first project is the R & D of membranes for carbon dioxide recovery at high temperature, conducted by the Japan Fine Ceramics Center (JFCC) and Japan Fine Ceramics Association (JFCA) under the supervision by the New Energy and Industrial Technologu Development Organization (NEDO). The second one is the R & D of membranes for petroleum refinery and chemical processes, conducted by the Japan High Polymer Center (JHPC) under the supervision by the Petroleum Energy Center (PEC). Cooperating with these projects researchers in many universities and research institutes have been publishing many interesting data of inorganic membranes manyfactured by various methods. Many such results are summarized and reported.