• 제목/요약/키워드: Inorganic and organic coagulants

검색결과 10건 처리시간 0.024초

응집제 종류에 따른 하수 슬러지의 침강 및 탈수 특성 변화 (Variation of Sedimentation & Dewaterability Characteristics of Sewage Sludge under Various Coagulants)

  • 백선재;조정민;송현우;한인섭
    • 한국물환경학회지
    • /
    • 제30권3호
    • /
    • pp.311-318
    • /
    • 2014
  • The purpose of this study is to investigate the effect of various types of coagulant on dewaterability and settleability of sewage sludge for the application of dewatering process. Cationic organic coagulants and inorganic coagulants of the aluminium base were used; PAC (Poly Aluminium chloride, $Al_2O_3$ 17%) and C-210P (0.2%). After Jar test, PAC 26 mg/L and 0.2% C-210P 55 mg/L was decided as the optimum concentration of the coagulant according to zeta potential measurement. pH, alkalinity and viscosity were measured in all experiments and the data on sedimentation characteristics is analyzed by SDI, SVI sedimentation rate and solid flux. The SRF(Specific Resistance of Filtration) experiment was conducted with the result of single and dual injection system as the dewaterability experiment. As a result, the organic coagulant making large floc has good characteristics of sedimentation and agglutination. Also, it is observed that the organic coagulants injection has a better dewaterability efficiency of coagulants under the condition of the lowest SRF value, followed by dual and inorganic coagulants injection.

Formation, Breakage and Reformation of Humic Flocs by Inorganic and Organic Coagulants

  • Kam, Sang-Kyu;Lee, Min-Gyu;Kang, Kyung-Ho;Xu, Mei-Lan
    • 한국환경과학회지
    • /
    • 제17권3호
    • /
    • pp.275-285
    • /
    • 2008
  • The floc formation, breakage and reformation of humic acid by inorganic (alum and PAC) and organic coagulants (cationic polyelectrolytes) at several conditions (pH, ionic strength and floc breakage time) were examined and compared among the coagulants at different conditions using a continuous optical monitoring method, with controlled mixing and stirring conditions. For alum, the shapes of formation, breakage and reformation curves at different pH (5 and 7) were different, but the shapes and the sizes of initial floc and reformed floc were nearly the same in the absence and presence of electrolytes at pH 7. For PAC, similar shapes of the curves were obtained at different pH and ionic strength, but the sizes were different, except for those of reformed flocs at different pH. However, for these coagulants, reformed flocs after floc breakage, occurred irreversibly for all the conditions used in this study. For organic coagulants, the time to attain the initial plateau floc size, the extent of floc strength at high shear rate and reversibility of reformed floes were different, depending floc formation mechanism. Especially, for the cationic polyelectrolyte forming humic flocs by charge neutralization or electrostatic patch effect mechanism, reformed flocs occurred reversibly, regardless of pH and floc breakage time, but occurred irreversibly in the presence of electrolytes.

정수공정 개선을 위한 유기성 Polymer의 사용 (Utilization of Organic Polymers for Improvement of Drinking Water Treatment Process)

  • 이화자;김정숙;강임석
    • 한국환경과학회지
    • /
    • 제7권2호
    • /
    • pp.217-222
    • /
    • 1998
  • Organics matters including algae are the major contaminants of Nak-dong river and it's concentration Is more Increasing now. The use of coagulants has been Incresed for the effective treatment of drinking water, and aluminum coagulants have been the most widely used in raw water treatment. However, when inorganic metal coagulant is excessively used for long period, it would result in secondary problems, such as increasing sludge production, enhancing the cost of water treatment process, and increasing concentration of residual metal, especially aluminum. Therefore, recently. in order to reduce the use of metal coagulant and enhance the coagulation effectiveness, several alternative coagulants, such as polymeric Inorganic coagulants and organic polymers, have been used In water treatment plants. The objectives of thins research were (11 to determine optimum dosage concentration and compare the coajuiation efnciency at various pH ranees with alum alone, alum+cationic polymer, and alum+anlonlc polymer, (21 to evaluate the amount of alum reduced by using organic polymer, (31 to maximize removal officiency of organic matter and minimize the concentration of residual aluminum.

  • PDF

병원폐수의 전기화학적 처리시 무기응집제 주입 효과에 관한 연구 (Effect of Inorganic Coagulants on the Performance of Electro-Chemical Treatment Process Treating Hospital Wastewater)

  • 정승현;정병곤
    • 대한환경공학회지
    • /
    • 제33권10호
    • /
    • pp.709-716
    • /
    • 2011
  • 전해질 농도가 낮은 병원폐수를 전기화학적으로 처리할 경우 무기응집제 주입 효과에 대해 고찰한 결과, 무기응집제 주입으로 전해질 농도가 높아져 병원폐수 내 유리염소의 농도의 증가로 유기물질의 간접산화효과가 증가하여 전류밀도 $1.76A/dm^2$, 반응시간 120분에서 무기응집제를 주입하지 않은 경우보다 COD 제거효율이 약 2배 향상되었다. 또한, 무기응집제에 의한 전해질의 증가로 HOCl과 같은 유리 잔류염소의 증가로 병원폐수 내의 클로라민이 질소로 전환되는 속도가 증가함에 따라 전류밀도 $1.76A/dm^2$, 반응시간 120분 및 응집제 주입량 700 ppm에서 T-N 제거율을 약 2배 향상시킬 수 있었다. 동일 조건에서 90% 이상의 높은 T-P 제거율을 얻을 수 있었는데, 이는 무기응집제에 의한 전해질의 증가로 양전극에서의 발생되는 용존산소에 의해 생성된 불용성 금속 화합물과 인산염의 화학적 흡착반응 속도가 증가하였기 때문인 것으로 판단된다. 이상의 실험에서 전해질이 부족한 병원폐수의 전기화학적 처리시 무기응집제를 전해질로 첨가할 경우 유기물질 및 영양염 제거에 모두 매우 효과적임을 알 수 있었다.

상수처리용 합성 무기고분자 Al(III)계 응집제의 응집특성 (Characterization of Coagulation on Synthetic Polymerization Al(III) Inorganic Coagulants for Water Treatment)

  • 한승우;정철우;강임석
    • 한국환경과학회지
    • /
    • 제8권6호
    • /
    • pp.717-724
    • /
    • 1999
  • This experiment was performed on three parts with prepared coagulants. (1) The characterization of coagulation for PACI coagulants. (2) Comparison of the characterization of coagulation with PAS and PACI coagulants. And (3) Comparison of the characterization of coagulation for the addition of calcium with PACI. Coagulation experiments were conducted with several dosages and pH for each coagulants. For the characterization of coagulation with PACI coagulants, coagulation of Nakdong river waters with three PACls (r=2.0, 2.2, 2.35) showed that the effectiveness of the three coagulants can be considered as r=2.2 > 2.0 > 2.35 which are also the order of higher polymeric aluminum contents. For the comparison of the characterization of coagulation for PAS and PACI coagulants, PAS (r=0.75) coagulants was more effective than other coagulant for the removal of organic matters by sweep floc mechanism with $A;(OH)_{3(S)}$. For comparison of the characterization of coagulation for the addition of calcium with PACI, the presence of divalent cation like $Ca^{2+}$ was supposed to influence the complex formation of organic anions. From the result of test on coagulation at various pH ranges, the PACI was least affected by the coagulation pH, and the addition of calcium to PACI was very effective for the removal of turbidity and organic materials over broader pH range (pH 4-9).

  • PDF

Comparison of Flocculation Characteristics of Humic Acid by Inorganic and Organic Coagulants: Effects of pH and Ionic Strength

  • Xu Mei-Lan;Lee Min-Gyu;Kam Sang-Kyu
    • 한국환경과학회지
    • /
    • 제14권8호
    • /
    • pp.723-737
    • /
    • 2005
  • The effects of pH (5, 7 and 9) and ionic strength of different salts on the flocculation characteristics of humic acid by inorganic (alum, polyaluminum chloride (PAC) with degree of neutralization, r=(OH/Al) of 1.7) and organic (cationic polyelectrolyte) coagulants, have been examined using a simple continuous optical technique, coupled with measurements of zeta potential. The results are compared mainly by the mechanisms of its destabilization and subsequent removal. The destabilization and subsequent removal of humic acid by PAC and cationic polyelectrolyte occur by a simple charge neutralization, regardless of pH of the solution. However, the mechanism of those by alum is greatly dependent on pH and coagulant dosage, i.e., both mechanisms of charge neutralization at lower dosages and sweep flocculation at higher dosages at pH 5, by sweep flocculation mechanism at pH 7, and little flocculation because of electrostatic repulsion between negatively charged humic acid and aluminum species at pH 9. The ionic strength also affects those greatly, mainly based on the charge of salts, and so is more evident for the salts of highly charged cationic species, such as $CaCl_2$ and $MgCI_2.$ However, it is found that the salts have no effect on those at the optimum dosage for alum acting by the mechanism of sweep flocculation at pH 7, regardless of their charge.

응집침전 및 부상분리에 의한 돈사폐수의 고액분리에 관한 연구 (A Study on Solid-liquid Separation of Swine Wastewater Using Coagulation and Dissolved Air Flotation)

  • 김종오;정성욱
    • 유기물자원화
    • /
    • 제12권2호
    • /
    • pp.101-109
    • /
    • 2004
  • 본 연구는 응집 및 부상분리를 이용하여 돈사폐수의 고액분리 특성을 조사하였다. 응집은 jar-tester를 이용하여 응집제 종류 및 주입량에 대해, DAF를 이용한 부상분리에서는 돈사폐수 원수 자체에 대한 부상조건과 pH만을 조정한 원수, 그리고 응집제를 주입한 후 부상을 통한 고액분리 특성을 실험적으로 연구하였다. 돈사폐수를 무기응집제 만으로 응집침전 처리하는 경우 $FeCl_3$ > PAC > Alum 순으로 응집침전효과가 나타났으며, 적정 응집제 주입량은 각각 $1,000mg/{\ell}$, $1,500mg/{\ell}$, $1,500mg/{\ell}$으로 나타났다. 고분자응집제 만으로 응집침전 처리하는 경우 양이온 응집제만이 유효한 응집침전 효과가 나타났으며 적정 응집제 주입량은 $200mg/{\ell}$로 나타났다. 무기응집제와 고분자응집제를 혼합 적용한 경우 각 무기응집제를 $500mg/{\ell}$ 투여한 후 양이온 고분자응집제 주입 농도를 달리하여 응집침전효과를 고찰한 결과 무기응집제의 처리 효율은 $FeCl_3$ > Alum > PAC순으로 나타났으며, 적정 양이온 응집제 주입농도는 $25mg/{\ell}$, $25mg/{\ell}$, $100mg/{\ell}$로 나타났다. DAF를 이용한 부상분리 실험에서 응집처리를 하지 않은 원수와 pH만을 조정한 원수에서의 실험결과를 종합하여 순환비 400%, 압력 4 atm, pH 3이하에서 DAF의 적정 운전 조건이 나타남을 알 수 있었다. 그러나 응집처리를 하지 않은 돈사폐수 원수를 대상으로 DAF를 적정하게 운전하기는 곤란한 것으로 판단되었으며, 또한 무기응집제로만 응집처리한 후 부상분리를 실시하였을 경우 floc의 강도가 약해 floc의 깨짐 현상이 나타나 부상분리가 이루어지지 않았다. 한편 무기응집제와 고분자응집제를 혼합하여 응집처리한 후 부상분리를 실시하는 경우 효과적인 부상분리가 이루어졌으며, Alum $500mg/{\ell}$를 기준으로 양이온 고분자응집제 주입농도가 $50mg/{\ell}$에서 가장 양호한 처리 결과를 나타내었다.

  • PDF

PAC를 이용한 인제거 공정에서 음이온계 고분자 첨가가 입도 분포에 미치는 영향 (Effect of Anionic Polymer on Particle Size Distribution in PAC Coagulation Process for Phosphorus Removal)

  • 김성홍;이동우;김동한;김두일
    • 한국물환경학회지
    • /
    • 제29권2호
    • /
    • pp.170-175
    • /
    • 2013
  • Achieving very low phosphorus levels in treated wastewater will require the installation of additional treatment. Phosphorus removal experiments by chemical coagulation were carried out for the effluent of wastewater treatment plant in this study. TP (total phosphorus) or phosphate were highly related to the addition of PAC (poly aluminium chloride) which is one of the inorganic coagulants. But, organic polymer did not significantly affect the phosphorus removal efficiency. Polymer affected the flocculation of particle especially particle matter less than 10 micrometer so, the number of micro particles was decreased by polymer dose. Chlorination would not affect on chemical coagulation process and TP and turbidity could be effectively removed by the co-addition of PAC and polymer.

국내 비점오염 현황 및 제어방안: 총설 (Assessment and its control of non-point source pollution in Korea: Review)

  • 강민우;이상수
    • 상하수도학회지
    • /
    • 제33권6호
    • /
    • pp.457-467
    • /
    • 2019
  • Because non-point source pollution is very closely related to hydrological characteristics, its importance is highly emphasized nowadays along with accelerating climate change. Especially for Korea, the non-point source pollution and its control are entirely depending on runoff, precipitation, drainage, land use or development, based on geographical and topographical reasons of Korea. Many studies reported the physical (e.g., apparatus- and natural-type facilities, etc.) and chemical methods (e.g., organic and inorganic coagulants, etc.) of controling non-point pollutant source pollution, however, those are needed to be reconsidered along with climate change causing the unexpected patterns and amounts of precipitation and strengthen complexity of social community. The objectives of this study are to assess recent situations of non-point source pollution in Korea and its control means and to introduce possible effective ways of non-point source pollution against climate change in near future.

에폭시수지 생산 공정에서 발생되는 brine 폐수의 전처리를 위한 응집 및 침전 반응의 최적화 연구 (A Study on The Optimization of Pre-treatment for the Brine Wastewater from the Epoxy-resin Process by the Coagulation and Sedimentation Reactions)

  • 조욱상;이은영;강성욱;이장수;진수익
    • 청정기술
    • /
    • 제11권2호
    • /
    • pp.57-67
    • /
    • 2005
  • 에폭시 수지는 ECH(Epichlorohydrin)와 BPA(Bisphenol-A)를 원료로 가성소다 존재 하에 탈수응축 반응을 통해 생성되며 반응 부산물로 소금물이 폐수로 발생되는데 이를 Brine이라 부르며 글리시돌과 같은 에멀젼 상태의 ECH 유도체와 수지성 폴리머를 함유하는 알카리성 폐수이다. 이러한 폐수는 폐수처리 과정에서 반응기 내부와 배관 내벽에 폴리머 입자가 침적 및 응고되어 plugging을 일으키는 등 전체적으로 후처리 공정에서 fouling 현상이 발생되고 있는데 이는 미생물의 분해 활성도를 급격히 떨어뜨려 폐수처리 효율이 낮아지는 문제점을 야기 시키고 있다. 본 연구에서는 무기 응집제와 유기 고분자 응집제를 이용하여 에폭시 수지 생산 공정에서 발생하는 brine 폐수에 존재하는 ECH 유도체와 수지성 폴리머를 반고상 슬러지 형태로 응집 및 침전시킴으로써 fouling 현상을 일으키는 요인을 제거하고자 최적의 응집반응 조건을 도출하였고 경제성 분석 등 이를 실제 공정에 적용할 수 있는 방안을 제시하고자 하였다.

  • PDF