Addition of nano-$SiO_2$ (NS) to geopolymer composites has been studied through measurement of compressive strengths, FTIR and XRD analysis. Alumino-silicate materials are coarse aggregate included waste concrete and demolished walls with its cementing binder, cement kiln dust (CKD) used and can possess a pronouncing activation for the geopolymer reaction resulting from the high alkali contents within. Materials prepared at water/binder ratios in a range of 0.30: 0.40 under curing of $40^{\circ}C$ and 100% Relative Humidity (R.H.), while the used activator is sodium hydroxide in the ratio of 2 wt. %. First, CKD is added in the ratio from 10 up to 50 wt., %, and the demolished walls was varied depending on the used CKD content, while using constant ratio of waste concrete (40 wt., %). Second step, depending on the optimum CKD ratio resulted from the first one (40 wt. %), so the control geopolymer mix composed of cement kiln dust, demolished walls and waste concrete in the ratio (40:20:40, wt %). Nano-silica partially replaced waste concrete by 1 up to 8%. Results indicated that, compressive strengths of geopolymer mixes incorporating nano-silica were obviously higher than those control one, especially at early ages and specially with 3%NS.
Geopolymer materials are attractive as inorganic binders due to their superior mechanical and eco-friendly properties. In the current study, geopolymer-based cement was prepared using aluminosilicate minerals from fly-ash with KOH as an alkaline-activator and $Na_2SiO_3$ as liquid glass. Then, calcium carbonate powder from a clam shell was mixed with the geopolymer and the mixture was coated on a concrete surface to provide points of attachment for environmental organisms to grow on the geopolymers. We investigated the effect of the shell powder grain size on the microstructure and bonding property of the geopolymers. A homogeneous geopolymer layer coated well on the concrete surface via aluminosilicate bonding, but the adhesiveness of the shell powder on the geopolymer cement was dependent on the grain size of the shell powder. Superior adhesive characteristics were shown in the shell powder of large grain size due to the deep penetration into the geopolymer by their large weight. This kind of coating can be applied to the adhesiveness of eco-materials on the surface of seaside or riverside blocks.
Esparham, Alireza;Moradikhou, Amir Bahador;Andalib, Faeze Kazemi;Avanaki, Mohammad Jamshidi
Advances in concrete construction
/
제11권3호
/
pp.219-229
/
2021
In recent years, geopolymer cements, have gained significant attention as an environmental-friendly type of cement. In this experimental research, effects of different alkaline activator solutions and variations of associated parameters, including time of addition, concentration, and weight ratio, on the mechanical strengths of Granulated Ground Blast Furnace Slag (GGBFS)-based Geopolymer Concrete (GPC) were investigated. Investigation of the effects of simultaneous usage of KOH and NaOH solutions on the tensile and flexural strengths of GGBFS-based GPC, and the influence of NaOH solution addition time delay on the mechanical strengths is among the novel aspects investigated in this research. four series of mix designs and corresponding specimen testing is conducted to study different parameters of the active alkali solutions on GPC mechanical strengths. The results showed that addition of NaOH to the mix after 3 min of mixing KOH and Na2SiO3 with dry components (1/3 of the total mixing duration) resulted in the highest compressive, tensile and flexural strengths amongst other cases. Moreover, increasing the KOH concentration up to 12 M resulted in the highest compressive strength, while weight ratio of 1.5 for Na2SiO3/KOH was the optimum value to achieve highest compressive strengths.
Organophosphorus (OP) pesticides, particularly malathion, parathion, diazinon, and chlorpyrifos, are widely used in both agricultural and residential contexts. This refractory quality is shared by certain organ phosphorus insecticides, and it may have unintended consequences for certain non-target soil species. Bioremediation cleans organic and inorganic contaminants using microbes and plants. Organophosphate-hydrolyzing enzymes can transform pesticide residues into non-hazardous byproducts and are increasingly being considered viable solutions to the problem of decontamination. When coupled with system analysis, the multi-omics technique produces important data for functional validation and genetic manipulation, both of which may be used to boost the efficiency of bioremediation systems. RNA-guided nucleases and RNA-guided base editors include zinc-finger nucleases (ZFNs), transcription activator-like effector nucleases (TALENs), and clustered regularly interspaced short palindromic repeats (CRISPR), which are used to alter genes and edit genomes. The review sheds light on key knowledge gaps and suggests approaches to pesticide cleanup using a variety of microbe-assisted methods. Researches, ecologists, and decision-makers can all benefit from having a better understanding of the usefulness and application of systems biology and gene editing in bioremediation evaluations.
원자력산업에서의 지르코늄합금 튜브 제조공정은 튜브 산세 시 질산과 불산을 사용하고 있어 세척 시 발생되는 폐수의 주요 오염물질은 질산성질소와 불소성분으로 이루어져 있다. 오염물질인 불소와 질산성질소의 처리를 위해, 다양한 실험을 거쳐 처리기술을 검토한 결과를 토대로, 당사의 폐수처리공정은 1차 화학응집처리에 의한 불소성분 제거공정, 황산화 탈질반응을 이용한 SOD (Sulfur Oxidation Denitrification)공법에 의한 독립영양탈질공정, 2차 화학응집처리공정으로 구성하여 운영하고 있다. 본 폐수처리공정의 특징은, 질산성질소제거를 위해 황산화 탈질공법(SOD Process)을 적용한 것이다. SOD공법은 기존의 황탈질공법과는 달리 황과 알칼리성물질을 일체화한 충진담체(JSC Pellet)를 사용한 기술로, 유기탄소원이 전혀 없는 무기계폐수의 탈질기술로서 주목받고 있다. 현재까지 폐수처리장의 운영결과를 보면, 유입수의 평균 T-N농도가 설계값인 100 mg/L를 상회하는 147.55 mg/L이었지만, 처리수의 평균 T-N농도는 12.72 mg/L로 91%의 높은 제거율을 안정하게 유지하고 있다. 이상의 결과로, SOD공법이 무기계 산업폐수의 질산성질소제거에 매우 유용한 공법임이 확인되었으며, 신규 개발한 미생물활성화제(특허출원 중)를 사용함에 의해 증식속도가 늦은 독립영양미생물의 활성이 안정적으로 유지되었다.
본 연구에서는 acrylonitrile-butadiene rubber(NBR)/타이어고무분말(Ground Tire Rubber, GTR) 블렌드계의 발포체를 제조하고, 이들의 난연성을 증진시키고자 하였다. 그 결과 난연제 중 유기인 화합물 및 무기금속 수산화물의 함량 증가에 따라 난연성이 증진됨을 확인할 수 있었다. 유기인 화합물의 경우 함량 증가에 따라 한계산소지수(LOI)가 증가하고, 열 방출 속도(HRR) 및 유효 연소열(EHC)이 감소하는 반면에 CO 방출률(량) 및 역기밀도가 증가함을 확인 할 수 있었다. 무기금속 수산화물은 함량 증가에 따라 난연효과 뿐만 아니라 열기발생 억제효과를 동시에 가짐으로써 LOI, HRR, EHC가 유기인 화합물 첨가에서와 같은 경향성을 보여주었지만 CO 방출률(량) 및 연기밀도에 있어서는 유기인 화합물 첨가에서와 상이하게 감소하였다. 그리고 난연성을 판단함에 있어 중요한 변수들인 열 방출속도, 유효 연소열, 무게감소, 한계산소지수간의 상관관계를 확인하였는데, A-HRR과 LOI가 증가함에 따라 질량손실이 각각 증가 혹은 감소하는 뚜렷한 경향성을 확인하였다. 이로써 NBR/GTR의 조성비기 $100{\sim}80/0{\sim}20 wt.%$이고 고무/난연제의 조성비가 $1/1.55{\sim}3.60 wt.%$일 때, 원활한 핵의 생성 및 cell의 성장으로 인해 균일한 closed cell 및 semi-closed cell을 보여주었다. 또한 $225{\sim}250 %$의 발포율을 보이며, 낯은 HRR과 높은 LOI($28.0{\sim}39.3$)를 갖는 난연성 및 발포성이 우수한 발포체를 얻을 수 있었다.
Kim, Won-Il;Jung, Goo-Bok;Kim, Min-Kyeong;Park, Kwang-Lai;Yun, Sun-Gang
한국환경농학회지
/
제20권5호
/
pp.310-316
/
2001
To find out the effect of low temperature on the regulation of tomato chloroplast genes, the optimization of the system in chloroplast protein synthesis and the identification of the changes in chloroplast protein synthesis induced by chilling were studied. Incorporation reaction occurred rapidly at the first 30 minutes and was constantly maintained after 60 minutes. A broad optimal temperature on protein synthesis was found around 20 to $30^{\circ}C$. No difference was shown in the chloroplast protein synthesis under high light intensity (1600 ${\mu}E/m^2/s$) as well as under low light intensity (400 ${\mu}E/m^2/s$) even darkness. $K^+$, $Mg^{++}$ and ATP at an optimal concentration act as an activator, while DTT, chloramphenicol, cycloheximide, $Ca^{++}$ and inorganic phosphate act as an inhibitor in the chloroplast protein synthesis. Synthesis of 15, 55 and 60 kd chloroplast encoded stromal proteins and 18, 24, 33 and 55 kd chloroplast encoded thylakoid membrane proteins were reduced by chilling, while 17 kd chloroplast encoded stromal protein and 16 kd chloroplast encoded thylakoid membrane protein was induced by chilling. It was expected that the 55 kd stromal protein would be the large subunit of rubisco and the 33 kd thylakoid membrane protein would be the D1 protein which was drastically reduced by chilling.
본 연구는 $CO_2$발생으로 인한 지구 온난화에 따른 해결책으로 고로슬래그, 레드머드, 실리카 흄 등을 시멘트를 대체하기 위한 기초적인 연구를 수행한 것으로 고로슬래그, 레드머드, 실리카 흄 및 알칼리 자극제를 사용하여 시멘트와 같은 성질을 가지는 경화체의 제조가 가능한지에 대한 실험적 검토를 실시하였다. 이를 위하여 시멘트 대체재로 고로슬래그, 레드머드, 실리카 흄 등의 무기결합재와 수산화나트륨(NaOH), 규산나트륨($Na_2SiO_3$)등을 사용하여 비빔시간 변화에 따른 강도특성을 선행실험에 실시하였다. 선행실험을 바탕으로 본 실험에서는 기건양생, 수중양생, 피막양생, 한지양생을 실시함으로써 경화체의 강도특성에 대하여 분석을 실시하였다. 그 결과, 수중양생 $80^{\circ}C$의 경우 재령 28일에서 압축강도 및 휨강도가 가장 우수하였으며 무시멘트 경화체의 제조가 가능해서 친환경적인 콘크리트 생산에 커다란 영향을 미칠 수 있을 것으로 판단된다.
본 연구는 사과의 자가불화합성 현상에 효과적인 저해제와 활력제를 탐색하기 위해 여러 종류의 물질을 조사하였다. 후지 사과의 화주조직에서 분비되는 S RNase에 대한 저해효과를 조사하기 위해 $In$$vitro$ 상에서 효소 저해제를 넣어 효소활성을 측정한 결과, Iron(II) Sulfate에서 현저하게 활성이 24.3% 감소되어 저해효과가 뛰어난 것으로 나타났다. $In$$vitro$ 상에서 후지 사과의 화분관 신장 억제 효과를 분석한 결과, 후지 사과의 화분은 2% Sucrose 신장배지 보다 10% Sucrose 신장배지에서 약 90% 이상의 높은 발아율을 나타났다. 또한 저해제와 첨가제 처리에 의한 안동지역과 영주지역의 Field에서 후지 사과 착과율 조사 결과, 안동지역에서는 $A^+$+V6 2회 처리가 86.1%로 중심화착과율이 가장 높았으며, 영주지역에서는 $A^+$+V1 1회 처리가 91.9%로 중심화 착과율이 가장 높은 것으로 나타났다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.