• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.293-300
• /
• 2004

A new earth retention system(Innovative Prestressed Wale System) has been developed and introduced. IPR earth retention system provides an economical benefit, construction easiness, good performance and safety. IPS is a prestressed wale by using a steel wire, which provides a high stiffness to resist the earth pressure. In order to investigate the applicability and the safety of new IPS system, field tests were performed. A new IPS system applied in a trench excavation performed successfully. Basic principles and mechanism of IPS system and measure performance were presented and discussed.

• 소성∙가공
• /
• 제31권3호
• /
• pp.143-150
• /
• 2022

The purpose of this study was to investigate an innovative hydroforming process for the cost-effective manufacturing of double layered tube with circumferentially corrugated patterns. Conventional double pipe heat exchanger has relatively poor heat transfer efficiency because of the limited contact area resulting from the concentrically arranged simple cylindrical structure. As a promising alternative to enhance heat transfer efficiency, double layered tube with corrugated internal pattern was considered in this study. To fabricate corrugated inner tube, innovative tube hydroforming system was developed. The customized loading paths were established using the simulated forming pressure and contracting stroke at various bar diameters. Experimentally obtained cross-sectional profiles were analyzed to evaluate the reliability and applicability of the hydroformed tube with various patterns. The results demonstrate that the proposed hydroforming process can be a feasible alternative for manufacturing high-performance double-tube heat exchangers.

• 국제초고층학회논문집
• /
• 제10권2호
• /
• pp.117-121
• /
• 2021

In 2016, an innovative liquid damper system was installed on the roof of a 35-story modular building in Brooklyn, NY to mitigate wind-induced movement of the structure. The new damper presented several advantages over traditional pendulum, liquid column or sloshing dampers, including lower fabrication and maintenance costs, modularity, and the flexibility to be tuned to a wider range of frequencies. The performance of the system was monitored on a regular basis over the past four years and found adequate, with only minor re-tuning and maintenance operations needed. Based on the experience and data gained through this project, a second iteration of the damper was developed. Called Hummingbird, the improved system further mitigates maintenance and tuning concerns, while allowing significant space savings.

• 경영과학
• /
• 제13권1호
• /
• pp.135-156
• /
• 1996

The purpose of this paper is to study the links between manufacturing strategy and change programs of manufacturing firms in Korea. The nature of our analysis is more descriptive than normative or confirmative. First, we investigate the linkage between manufacturing strategy, manufacturing capability, change programs and performance measurement systems. Secondly, we intend to explore an empirical typology of manufacturing strategy and change programs. The initial findings of the study are as follows: Linkage between manufacturing strategy and change programs of manufacturing firms was not apparent. Flexibility as a strategic priority is positively related to the innovative change programs. There are two distinctive strategies of manufacturing firms in Korea, namely, quality strategy and balanced strategy. We identified three types of change programs, which are incremental change, administrative innovation, and process innovation. Incremental change group has represented low factor score in the change program dimensions. The firms in administrative innovation group mainly depend on information systems and business reengineering. Korean manufacturing firms seem to pursue process improvement by trying simultaneously incremental change in the process, managerial process improvement, and a little bit of innovative change. Performance variable utilization of the firms are not significantly different along with manufacturing strategies and change programs. We found, however, learning and improvement performance dimension is significantly related to flexibility variables. Process innovation group marked high score in usage of learning and improvement indices. The findings of this study seem to have various implications on realigning the manufacturing strategy, change programs, and performance systems in Korean firms.

• Steel and Composite Structures
• /
• 제20권5호
• /
• pp.999-1022
• /
• 2016

The use of Carbon Fiber Reinforced Polymer (CFRP) to strengthen steel structures has attracted the attention of researchers greatly. Previous studies demonstrated bonding of CFRP plates to the steel sections has been a successful method to increase the mechanical properties. However, the main limitation to popular use of steel/CFRP strengthening system is the concern on durability of bonding between steel and CFRP in various environmental conditions. The paper evaluates the performance of I-section steel beams strengthened with pultruded CFRP plate on the bottom flange after exposure to diverse conditions including natural tropical climate, wet/dry cycles, plain water, salt water and acidic solution. Four-point bending tests were performed at specific intervals and the mechanical properties were compared to the control beam. Besides, the ductility of the strengthened beams and distribution of shear stress in adhesive layer were investigated thoroughly. The study found the adhesive layer was the critical part and the performance of the system related directly to its behavior. The highest strength degradation was observed for the beams immersed in salt water around 18% after 8 months exposure. Besides, the ductility of all strengthened beams increased after exposure. A theoretical procedure was employed to model the degradation of epoxy adhesive.

• Computers and Concrete
• /
• 제16권5호
• /
• pp.703-722
• /
• 2015

This study investigates the performance of advanced hollow reinforced concrete (RC) bridge column sections with triangular reinforcement details. Hollow column sections are based on economic considerations of cost savings associated with reduced material and design moments, as against increased construction complexity, and hence increased labor costs. The proposed innovative reinforcement details are economically feasible and rational, and facilitate shorter construction periods. We tested a model of advanced hollow column sections under quasi-static monotonic loading. The results showed that the proposed triangular reinforcement details were equal to the existing reinforcement details, in terms of the required performance. We used a computer program, Reinforced Concrete Analysis in Higher Evaluation System Technology (RCAHEST), for analysis of the RC structures; and adopted a modified lateral confining effect model for the advanced hollow bridge column sections. Our study documents the testing of hollow RC bridge column sections with innovative reinforcement details, and presents conclusions based on the experimental and analytical findings. Additional full-scale experimental research is needed to refine and confirm the design details, especially for the actual detailing employed in the field.

• Advances in concrete construction
• /
• 제7권4호
• /
• pp.219-229
• /
• 2019

This paper presents an experimental study on the structural performance of an innovative ultra-high performance fiber reinforced concrete (UHPFRC) deck with coarse aggregate of composite bridge under shear force. Test parameters included curing method and shear span-to-height ratio. Test results indicated that more short fine cracks developed beside the existing cracks due to the randomly dispersed fibers, resulting in re-distributing and homogenizing of the concrete stress beside cracks and allowing for the occurrence of more cracks with small spacing compared to normal strength concrete beams. Curing methods, incorporating steam curing and natural curing, did not have obvious effect on the nominal bending cracking strength and the ultimate strength of the test specimens. Shear reinforcement need not be provided for UHPFRC decks with a fiber volume fraction of 2%. UHPFRC decks showed superior load resistance ability after the appearance of cracks and excellent post-cracking deformability. Lastly, the current shear provisions were evaluated by the test results.

• 기술경영경제학회:학술대회논문집
• /
• 기술경영경제학회 2004년도 25회 하계학술발표회 논문집
• /
• pp.88-111
• /
• 2004

• 한국지반공학회논문집
• /
• 제21권2호
• /
• pp.27-36
• /
• 2005

본 연구에서는 도심지 굴착 현장에 적용된 IPS(Innovative Prestressed Support) 흙막이 구조물의 거동을 파악하여 시스템의 안정성을 확인하였다. 새로운 흙막이 지보재인 IPS 띠장은 지반 굴착으로 인한 토압을 자체의 휨강성을 이용하여 버팀보에 전달하는 특징을 가지고 있다. IPS 띠장의 휨강성은 기존 굴착 공법에 적용된 띠장에 비해 월등하기 때문에 IPS 띠장을 활용하면 흙막이 벽체를 지지하는 버팀보의 설치 간격을 획기적으로 법힐 수 있으며 굴착시에 법은 작업 공간을 제공한다. 이로 인해 굴착 공사에 사용되는 강계의 물량을 줄일 수 있다. 또한 IPS 띠장에 강선의 인장력을 도입하여 선행 하중을 가함으로써 지반 굴착으로 인한 흙막이 벽체의 변형을 제한할 수 있다. 본 연구에서는 IPS 흙막이 공법을 적용한 도심지 굴착 현장에 시공 전기간 계측을 수행하여 그 적용성과 안정성을 확인하였다. 현장 계측 결과를 분석하여 혁신적인 흙막이 지보재인 IPS 띠장과 IPS 흙막이 벽체 그리고 코너 스트친의 거동을 분석하였다.

• Earthquakes and Structures
• /
• 제8권6호
• /
• pp.1325-1348
• /
• 2015

Real-time hybrid testing (RTHT) involves virtual splitting of the structure into two parts: physical substructure that contains the key region of interest which is tested in a laboratory and numerical substructure that contains the remaining part of the structure in the form of a numerical model. This paper numerically assesses four step-by-step integration methods (Central difference method (CDM), Operator splitting method (OSM), Rosenbrock based method (RBM) and CR-integration method (CR)) which are widely used in RTHT. The methods have been assessed in terms of stability and accuracy for various realistic damping ratios of the physical substructure. The stability is assessed in terms of the spectral radii of the amplification matrix while the accuracy in terms of numerical damping and period distortion. In order to evaluate the performance of the methods, five carefully chosen examples have been studied - undamped SDOF, damped SDOF, instantaneous softening, instantaneous hardening and hysteretic system. The performance of the methods is measured in terms of a non-dimensional error index for displacement and velocity. Based on the error indices, it is observed that OSM and RBM are robust and performs fairly well in all the cases. CDM performed well for undamped SDOF system. CR method can be used for the system showing softening behaviour. The error indices indicate that accuracy of OSM is more than other method in case of hysteretic system. The accuracy of the results obtained through time integration methods for different damping ratios of the physical substructure is addressed in the present study. In the presence of a number of integration methods, it is preferable to have criteria for the selection of the time integration scheme. As such criteria are not available presently, this paper attempts to fill this gap by numerically assessing the four commonly used step-by-step methods.