• Journal of Korean Ophthalmic Optics Society
• /
• v.12 no.1
• /
• pp.35-40
• /
• 2007

Most of eyeglasses manufacturers in Korea consist of relatively small-sized enterprises with less than 10 employees. In terms of scale, it performs considerably poor compared to other competing nations like Italy and the People's Republic of China. As a result, domestic eyeglasses industry is facing a difficult position between high-priced products of developed countries and low-priced goods of China, South East Asia, and etc. Considering these factors, the urgent solution for revitalization of domestic eyeglasses industry could be seen as major structural changes in eyeglasses producers. In addition, it is also noted that procurement of competitiveness is an essential scheme to reinvigorate the Korean eyeglasses industry. This objective can be achieved via improvement of ability to develop new designs, exploitation of new material and technology, intensification of own innovative brand and public relations, development of new products such as functional glasses, reduction of sample producing period, provision of administrative support, and designation of special economic zone.

• Smart Structures and Systems
• /
• v.14 no.5
• /
• pp.811-830
• /
• 2014

A numerical study has been carried out to simulate an innovative monitoring procedure to detect and localize damage in reinforced concrete beams retrofitted with carbon fiber reinforced polymer (CFRP) unidirectional laminates. The main novelty of the present simulation is its ability to conduct the electromechanical admittance monitoring technique by considerably compressing the amount of data required for damage detection and localization. A FEM simulation of electromechanical admittance-based sensing technique was employed by applying lead zirconate titanate (PZT) transducers to acquire impedance spectrum signatures. Response surface methodology (RSM) is finally adopted as a tool for solving inverse problems to estimate the location and size of damaged areas from the relationship between damage and electromechanical admittance changes computed at PZT transducer surfaces. This statistical metamodel technique allows polynomial models to be produced without requiring complicated modeling or numerous data sets after the generation of damage, leading to considerably lower cost of creating diagnostic database. Finally, a numerical example is carried out regarding a steel-reinforced concrete (RC) beam model monotonically loaded up to its failure which is also retrofitted by a CFRP laminate to verify the validity of the present metamodeling monitoring technique. The load-carrying capacity of concrete is predicted in the present paper by utilizing an Ottosen-type failure surface in order to better take into account the passive confinement behavior of retrofitted concrete material under the application of FRP laminate.

• Journal of Powder Materials
• /
• v.26 no.6
• /
• pp.508-514
• /
• 2019

In the development of advanced ceramic tools, material improvements and design freedom are critical in improving tool performance. However, in the die press molding method, many factors limit tool design and make it difficult to develop innovative advanced tools. Ceramic 3D printing facilitates the production of prototype samples for advanced tool development and the creation of complex tooling products. Furthermore, it is possible to respond to mass production requirements by reflecting the needs of the tool industry, which can be characterized by small quantities of various products. However, many problems remain in ensuring the reliability of ceramic tools for industrial use. In this study, alumina inserts, a representative ceramic tool, was manufactured using the digital light process (DLP), a 3D printing method. Alumina inserts prepared by 3D printing are pressurelessly sintered under the same conditions as coupon-type specimens prepared by press molding. After sintering, a hot isostatic pressing (HIP) treatment is performed to investigate the effects of relative density and microstructure changes on hardness and fracture toughness. Alumina inserts prepared by 3D printing show lower relative densities than coupon specimens prepared by powder molding but indicate similar hardness and higher fracture toughness values.

• The Journal of the Korea Contents Association
• /
• v.18 no.5
• /
• pp.23-33
• /
• 2018

As there have been many cases where successful regional festivals acts as the promotion of regional brand images and as the driving force of regional economic development, changes in awareness that significantly accepts external promotion effects and the commercial value of regional festivals are greatly expanding. When seen from this perspective, the regional festival, which has Tojeong Lee Ji-Ham, a scholar in the Joseon Dynasty period in the 16th century and Geolincheong as subject matter, is expected to contribute greatly to the establishment of Chungnam Asan region's identity and to the vitalization of the regional economy. He is one of the all-time eccentrics and at the same time he is an intellectual who practiced innovative spirit of the times and a sense of economy for the relief and self-support of common people and the balanced development of the nation during his life. In this sense, the regional festival that is based on Lee Ji-Ham's Geolincheong has meaning and values as a cultural content from and device, which realizes and continues the spirit of the times and the thoughts that he pursued, in the modern context in time and space.

• Safety and Health at Work
• /
• v.6 no.3
• /
• pp.227-232
• /
• 2015

Background: In comparison with other industries, the construction industry still has a higher rate of fatal injuries, and thus, there is a need to apply new and innovative approaches for preventing accidents and promoting safe conditions at construction sites. Methods: In this study, the effectiveness of a new incentive system-the surprising incentive system-was assessed. One year after the implementation of this new incentive system, behavioral changes of employees with respect to seven types of activities were observed. Results: The results of this study showed that there is a significant relationship between the new incentive system and the safety performance of frontline employees. The new incentive system had a greater positive impact in the first 6 months since its implementation. In the long term, however, safety performance experienced a gradual reduction. Based on previous studies, all activities selected in this study are important indicators of the safety conditions at workplaces. However, there is a need for a comprehensive and simple-to-apply tool for assessing frontline employees' safety performance. Shortening the intervals between incentives is more effective in promoting safety performance. Conclusion: The results of this study proved that the surprising incentive would improve the employees' safety performance just in the short term because the surprising value of the incentives dwindle over time. For this reason and to maintain the surprising value of the incentive system, the amount and types of incentives need to be evaluated and modified annually or biannually.

• Smart Structures and Systems
• /
• v.13 no.6
• /
• pp.993-1014
• /
• 2014

In civil engineering, revolving structures (RS) are a unique structural form applied in innovative architecture design. Such structures are able to revolve around themselves or along a certain track. However, few studies are dedicated to safety design or health monitoring of RS. In this paper, a wireless dynamic sensing system is developed for RS, and field tests toward a large revolving auditorium are conducted accordingly. At first, a wheel-rail problem is proposed: The internal force redistributes in RS, which is due to wheel-rail irregularity. Then the development of the sensing system for RS is presented. It includes system architecture, network organization, vibrating wire sensor (VWS) nodes and online remote control. To keep the sensor network identifiable during revolving, the addresses of sensor nodes are reassigned dynamically when RS position changes. At last, the system is mounted on a huge outdoor revolving auditorium. Considering the influence of the proposed problem, the RS of the auditorium has been designed conservatively. Two field tests are conducted via the sensing system. In the first test, 2000 people are invited to act as the live load. During the revolving process, data is collected from RS in three different load cases. The other test is the online monitoring for the auditorium during the official performances. In the end, the field-testing result verifies the existence of the wheel-rail problem. The result also indicates the dynamic sensing system is applicable and durable even while RS is rotating.

• The Journal of Society for e-Business Studies
• /
• v.17 no.4
• /
• pp.197-208
• /
• 2012

Recently, the development of smart devices such as smart phones and tablet PCs, with mobility, convenience and real-time computing, promotes proliferation and activation of social media. It also causes innovative changes in communication methods. Since 2010, researches in SNS (Social Networking Services) have focused on developing marketing strategies using SNS. On the other hand, the main purpose of this study is to provide a requirement analysis method of smart phone users by using content analysis of SNS. An information systems developed in this study in order to analyze content of SNS automatically because it is very difficult and time consuming to analyze it manually. In addition, this study compares the result of content analysis with that of Kano survey in order to examine consistency between the two results.

• Korea Journal of Hospital Management
• /
• v.18 no.2
• /
• pp.33-56
• /
• 2013

The purpose of this study is to analyze the change of hospitals that patients safety and quality improvement by accreditation process and to examine the impact or interrelation of leadership, organizational culture, hospital management activities and recognition of hospital management performances. The data were collected through a review of the literature, and selfadministered survey with a structured questionnaires to 714 subjects from several medical staff members, administration staff members, nursing staff members, medical technicians and other staff members working in 23 accredited hospitals in Korea. In this analysis hierarchical multiple regression and structural equation model were used. The conclusion of this study provides a theoretical model for understanding organizational changes brought about by accreditation system. Factor on improvement of efficiency and raise the morale, rather than increase of medical income and reduce of the cost factors, had a stronger influence on the accreditation process. In the future, the hospital's participation to induce the accreditation program voluntarily will come up with an alternative policy concern about financial perspective. Also, the hospitals which preparing accreditation program to achieve the goal efficiently, will make use of transformational leadership through enhancing individual consideration and intellectual development to leading members participation. Additionally, non-accredited hospitals should aim at professional culture by innovative and creative approaches, and inviting members to learning and growth in the organization.

• Journal of the Korean Home Economics Association
• /
• v.38 no.1
• /
• pp.25-38
• /
• 2000

This study focuses on the Russian Constructivist Textile Design in the post-revolutionary period, of the early 20th century. Russian textile of the time is highly valued in the west in terms of innovative changes in aesthetic directions, which has become one of the most important centers for the development of new textiles, or the origin of industrial design. Most of brilliant mass-production patterns were produced specially by the pioneers of constructivists such as Stepanova and Popova who were influenced by 'Maxism' through the Revolution regarded themselves as productivists for the proletariat. They were inspired by the avant-garde movements, which were involved with traditionalism, futuristic mechanism, stylization of nature, pure geometrical and abstract form. Early textile design was based on the relationship between the graphic methods of design and the technology because they regarded art as physical, intellectual and technical production. They created all the excitement made from the primary simplest forms of precise mathmatical shapes, such as the circle, the triangle, the rectangle and horizontle and vertical lines. These geometric design can be interpreted as the mechanization of the artists'labor, or methods in line with the technology of mass production, however partly roots in the rich tradition of Russian decorative art. On the other hand, stable crystalline construction on the surface reflect urban architectural complex, and the world of industry in graphic form. They were interested in illusion of movement, cinematic movement of vertical linear rhythms, optical formations and vibrations, by composing a multi-leveled constructions by several spatial planes, or color-field, and combining structures of several intersecting matrices, and superimposing parts of the forms on each other. All these characteristics of the Russian textile designs reflect the complex interactions between 'art and society' of Constructivist's idea and represent the traits of the epoch.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.5
• /
• pp.197-202
• /
• 2018

The world's ageing population continues to rise rapidly while fertility levels have dropped to low rates in many developed and developing countries, and life expectancy is expected to extend compared to previous decades. Because of demographic changes, a new concept of technology should be introduced. Ambient Assisted Living(AAL) is an innovative form of technology that can be used to provide elderly people with quality of life, to live longer and independently, to monitor and assist elderly, and improve social communication. As far as an AAL system are working, however, the dataset size is continuously increasing. As the AAL data increases in size, therefore, the problem of effectively managing it becomes more difficult. In this paper, therefore, we propose a data management scheme for AAL system on the characteristics of the collected AAL data. Simulation results show that the proposed data management scheme allows achieving space efficiencies higher.