• Geomechanics and Engineering
• /
• v.21 no.1
• /
• pp.23-33
• /
• 2020

An advancing cutting roof for gob-side entry retaining with no-pillar mining under specific geological conditions is more conducive to the safe and efficient production in a coalmine. This method is being promoted for use in a large number of coalmines because it has many advantages compared to the retaining method with an artificial filling wall as the gateway side filling body. In order to observe the inner structure of the gateway cutting roof and understand its stability mechanism, an equivalent material simulation experiment for a coalmine with complex geological conditions was carried out in this study. The results show that a "self-stabilization bearing structure" equilibrium model was found after the cutting roof caving when the cut line deviation angle was unequal to zero and the cut height was greater than the mining height, and the caving roof rock was hard without damage. The model showed that its stability was mainly controlled by two key blocks. Furthermore, in order to determine the optimal parameters of the cut height and the cut line deviation angle for the cutting roof of the retaining gateway, an in-depth analysis with theoretical mechanics and mine rock mechanics of the model was performed, and the relationship between the roof balance control force and the cut height and cut line deviation angle was solved. It was found that the selection of the values of the cut height and the cut line deviation angle had to conform to a certain principle that it should not only utilize the support force provided by the coal wall and the contact surface of the two key blocks but also prevent the failure of the coal wall and the contact surface.

• Korean Institute of Interior Design Journal
• /
• no.6
• /
• pp.15-20
• /
• 1995

In this paper, a strategy for utilizing the Korean tradi-tional spaces and interior design elements in inner space in order to express Korean-style interior design has been studied. Characteristics of Korean tradition was gathered from literatures in two categories; space and el-ements. Space again has been studied in detail in the area of split, continuity, hierarchy, elasticity, dynamics. And study of elements includes floor, wall, ceiling, dan-chung, lattice, laytiles on a roof, rafter, extended eaves, the line of eaves. 30 Korean restaurants were selected, analysed and compared with literature review. Based on the compari-son, a strategy for proper expression and utilization of Korean tradition is suggested. In the process of compari-son, current status of implementation and problems were found. Traditional elements are used in about 50% of Korean restaurants located in hotels, and 25% of those located in department stores. With the survey and other professional's opinions, an implementation plan is suggest-ed as follows; 1. Succession design method of tradition should use main-ly amelioration method and use copy and partly abstraction method. 2. Expression of tradition has to include all of space, ele-ments, and decoration. In space structure, Korean tra-dition space structure must be applied. 3. In order to design with feeling of Korean tradition, various different Korean elements have to be used. 4. In order to express high quality design, high-quality elements has to be used.

• Journal of Korean Association for Spatial Structures
• /
• v.11 no.4
• /
• pp.71-78
• /
• 2011

Interactive media are applied to inner and outer space of small public space to enhance for the interaction between the spectator and works, also widely used in the exterior wall by LED and projector for advertisement. In the other hand, case studies of interactive media for large space have not less accomplished than those of buildings and public spaces. Thus, these studies analyzed 11 large structure examples by display, content, interface, and technology device by comparison of those cases of ordinary building public space. First interactive media for large space are found to be contents(39%), and next one is play(27%), advertisement(17%) and message(17%).

• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.40-50
• /
• 2022

The purpose of this study is to prove the global OTT, Netflix's organizational resilience (OR). For this, we review previous literatures regarding Netflix's OR and the theoretical logic of the OR. Then, we investigate Netflix's organizational culture (OC), corporate structure and business strategies based on the five levers of the OR. As a result, the first lever, the coordination makes Netflix to get rid of the inner wall by creating Netflix terms like 'sunshining,' and 'postmortem,' which makes their employees extraordinarily candid with each other. The second lever, the cooperation provides employees with understanding customers by sharing company and service information openly and broadly through transparent board system, billboard advertising, etc. The third lever, the clout allows Netflix to encourage independent decision-making by their employees. Netflix customers are under scrutiny and served 24/7 via live chat or phone by supporting a high-performance workplace. The fourth lever, the capabilities are related to Netflix's keeping highly effective people and it establishes a culture of highly motivated employees. The "dream team" policy is run by what is known as the "keeper test." The last lever, the connections make Netflix to forge external strategic partnership to stay agile. There is no rule for partnering with key content producers by allowing creative freedom to them.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.38 no.4
• /
• pp.12-24
• /
• 2020

The purpose of this study is to analyze the influence of the water system on the location, spatial structure, and construction method of Hongju-eupseong, centering on Hongjumok-eupchi. During the Joseon Dynasty, the water system in Hongjumok-eupchi is composed of artificially constructed Seong-an Runnel and ponds based on a branch-shaped natural waterways flowing from south to north and west to east. Compiling the results of various literature records, excavations and analysis of map data, it can be seen that the water system has an important influence on the construction of Hongju-seong. Firstly, Hongju-seong from the Goryeo Dynasty to the late Joseon Dynasty is located using a circular shape of topographical structure and a small erosion basin formed on the inner side of the Hongseongcheon and Wolgyecheon streams without significant change in location. In particular, Wolgyecheon and Hongseongcheon are natural moats, which are harmonized with Sohyangcheon and riverside topographical structures, affecting the location and construction method of Hongju-seong, water related facilities, and the spatial structure of eupseong. It is understood that location characteristic of Hongju-seong reflects the urban location structure harmonized with waterways in ancient China and Korea. Secondly in harmony with the water system and topographic structure of Hongju-seong, it is an important factor in deciding the land use of the town, the arrangement of the town hall facilities and inducing various non-subsidiary measures such as the establishment of embankment forest with a secret function and the closure of the south gate. In addition, artificial drainage facilities such as Seongan runnel and ponds are being actively introduced from early on to protect the walls or towns from flooding of Wolgyecheon. Especially there were typical methods for protecting the walls from water damage such as the Joseon Dynasty stone castle structure that was integrated with saturn(soil wall) in the Goryeo Dynasty, retreating wall in the northern gate area in the late Joseon Dynasty, and the method of constructing wall using korean tile and stone floors between reinforced soil layers in the western and northern wall.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.41 no.4
• /
• pp.77-85
• /
• 1999

In this study, a computer program considering initial imperfection of axisymmetric reinforced concrete shell which plastic deformation by large external loading was developed . Initial imperfection of dome was assumed as 'dimple type' which can be expressed as Wi=(Wo/h)(1-x$^2$)$^3$. The developed model applied to the analysis of dynamic response of axisymmetric reinforced concrete shell when it has initial imperfection. The initial imperfection of 0.0, -5.0, and 5cm and steel and steel layer ratio 0,3, and 5% were tested for numerical examples . The results can be summarized as follows ; 1. Dynmaic response of vertical deflection at dome crown showed slow increased if it has not inital imperfection . But the response showed relatively high amplitude when initial imperfection was inner directed (opposite direction to loading). Similar trends also appeared for different steel layer ratios. 2. Dynamic responses of radial displacement at the junction of dome and wall showed the highest amplitude when initial imperfection was inward directed (opposite direction to loading). The lowest amplitude occurred when initial imperfection was outward directed (same direction to loading). Vibration period also delayed for inward directed initial imperfection . These trends were obvious as steel layer ratio increasing. 3. The effects of imperfection for the dynamic response of radial displacement a the center of wall scarely appeared. The effects of initial imperfection of dome on the dynmaic response of the wall can be neglected. 4. Effect of steel on the dynmic response of axisymmetric shell structure was great when initial imperfection did not exist. And the effect of direction of initial imperfection (inward or outward) did not show big difference.

• Journal of Forest and Environmental Science
• /
• v.8 no.1
• /
• pp.51-66
• /
• 1992

This study was carried out to investigate the micromorphology of vessel wall sculpture such as shape of perforation plate, perforation rim, steepness of perforation plate, occurrence of vestured pit, warty layer and ray-vessel pitting on 13 species of Fagaceae in Korea. The results were summarized as follows ; 1. In the species examined, all sample species except Fagus crenata var. multinervis have simple perforation plate. But Fagus crenata var. multinervis has simple and scalariform perforation plate (it was called to combination perforation plate) in a tree stem. 2. The shapes of perforation rim could be classified into five types; Type A without tail, Type B with small tail on both sides, Type C with long tail on both sides, Type D with tail only one side and Type E with the very short interval between perforations. Among five types, Type Band C have higer frequency of distribution than the others. 3. The steepness of perforation plate measured was about 20 degree on pore zone and 43 degree on outside parts of pore zone. 4. Species with vestured pit were Q. aliena, Q, dentata, Q. variabilis, Fagus crenata var. multinervis, Castanopsis cuspidata var sieboldii, Q. acuta, Q. stenophylla, and Q. glauca. But the extent of vesturing was very slight and vestured pits were observed mainly in ray-vessel pit of some vessel elements. 5. Species with warty layer on the inner surface wall of all vessel elements were Q. acuta, Q. stenophylla, Q. glauca, Fagus crenata var. multinervis and species with warty layer of some vessel elements were Q. aliena, Q, dentata, Q. variabilis, Castanopsis cuspidata var. sieboldii. 6. Species with palisade ray-vessel pit were Q. acuta, Q. stenophylla, Q. glauca, Castanea crenata, Castanea bungeana, Q. aliena, Q. serrata, Q. mongolica, and species with scalariform ray-vessel pit was Fagus crenata var. multinervis and species with oval ray-vessel pit were Q, dentata, Castanopsis cuspidata var sieboldii.

• Journal of the Microelectronics and Packaging Society
• /
• v.9 no.4
• /
• pp.55-60
• /
• 2002

This paper presents a technique for the preparation of vertically grown CNTs by ICPHFCVD(inductively coupled plasma hot filament chemical vapor deposition) below $580^{\circ}C$. Purification of the CNTs(carbon nanotubes) using RE(radio frequency) plasma in a one step process, based on the different etching property of the Ni-tip, amorphous carbon and carbonaceous materials is also discussed. After purifying the grown materials. CNTs shown the multi walled and hollow typed structure. The typical outer and inner diameters or CNT were 50 nm and 25 nm, respectively. The graphitic wall was composed of 82 layers and the distance between wall and wall was 0.34 nm. From the results of TEM observation, the Ni catalyst at the tip of the carbon nanotubes were effectively removed by using a RF plasma etching, continuously.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.1
• /
• pp.1-9
• /
• 2018

In this paper, we propose a film-type dual-band frequency selective structure for improving the wireless communication environment in a building. The proposed frequency-selective structure is a miniaturized structure that can control the resonant frequencies of 2.4 GHz and 5 GHz dual band through simple design parameters. We fabricated the frequency-selective surface by screen printing using conductive ink on a thin transparent film and confirmed its performance by measurement. We analyzed the attenuation performance of the unnecessary signal from the outside when the frequency-selective structure designed using the software to analyze the propagation environment performance is applied to the building. To verify the analytical results, the signal strength of the indoor environment was measured by applying the frequency-selective film fabricated on the inner wall of the actual building. The measurement results show that the dual-band frequency-selective film has 29.4 dB and 15.94 dB attenuation performance in the 2.4 GHz and 5 GHz, respectively.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.11
• /
• pp.755-759
• /
• 2016

The use of heat pipes in the electronic telecommunication field is increasing. Among the various types of heat pipes, the thin flat heat pipe has relatively high applicability compared with the circular heat pipe in the electronic packaging application. The thin flat heat pipe based on extrusion fabrication has a simple capillary wick structure consisting of rectangular cross sectional grooves on the inner wall of the pipe. Although the groove serves as a simple capillary wick, and many such grooves are provided on the inner wall, it is difficult for the grooves to realize a sufficiently high capillary force. In the present study, a thin flat heat pipe with a wire bundle was developed to overcome the drawback of poor capillary force in the thin flat heat pipe with grooves, and was evaluated by conducting tests. In the performance test, the thin flat heat pipe with the wire bundle showed a lower thermal resistance of approximately 3.4 times, and a higher heat transfer rate of approximately 3.8 times with respect to the thin flat heat pipe with grooves as the capillary wick respectively. The possibility of using the wire bundle as a capillary wick in the heat pipe was validated in the present study; further study for commercializing this concept will be taken up in the future.