• 한국기계가공학회지
• /
• 제16권1호
• /
• pp.118-123
• /
• 2017

It is well known that water jetting is now widely used in the advanced cutting processes of polymers, metals, glass, ceramics, and composite materials because of some advantages, such as heatless and non-contacting cutting different from the laser beam machining. In this paper, we proposed the simulation model of waterjet by lengths and the inner spiral structure of the nozzle. The simulation results show that the outlet velocity of the nozzle is faster than the inlet. Furthermore, we found rapid velocity reduction after passing through the outlet. The nozzle of diameter ${\phi}500$ and length 70mm, shows the optimal fluid width and velocity distribution. Also, the nozzle with inner spiral structure shows a Gaussian distribution of velocity and this model is almost twice as fast as the model without spiral structure, within the effective standoff distance (2.5 mm). In the future, when inserting abrasive material into the waterjet, we plan to analyze the fluid flow and the particle behavior through a simulation model.

• 대한전자공학회논문지SP
• /
• 제38권2호
• /
• pp.129-137
• /
• 2001

Matching Pursuit Algorithm은 저 전송 채널에서의 비디오 부호화에 뛰어난 효과를 나타내고 있지만, 주어진 입력 영상을 가장 유사하게 표현 하는데 필요한 구성 신호들을 찾아내기 위한 연산량이 많다는 현실적 문제점을 갖고 있다. 본 논문은 영상에 열화를 주지 않고 연산량을 크게 줄일 수 있는 새로운 방법을 제안한다. 이 방법은 전체적인 Matching Pursuit Algorithm중에서 가장 많은 연산을 요구하는, 영상을 구성하는 기본 신호들을 찾아내는데 필요한 내적 연산을 줄이는데 기초한다. 이를 위해 첫번째 과정으로 기존의 고속 방법인 분리성(Separable property)을 이용한 방법을 사용하여 주어진 입력영상과 수직성분의 1차원 기본 신호를 내적 하여 생성되는 결과값들을 저장한다. 두 번째 단계에서는 수평성분의 1차원 신호와의 내적 연산에 적용되는 부분들로 이루어진 1차원 신호들을 위치벡터의 개념을 도입하여 벡터길이를 측정한 후, 그 길이 값과 현재까지의 최대 내적 절대값을 서로 비교한 후 수평성분과의 내적 연산을 수행할지 하지 않을지를 판단한다. 대부분의 신호들은 다음단계의 내적 연산을 필요로 하지 않기 때문에 내적 연산랑을 크게 줄일 수 있다. 실험결과에 나타난 바와 같이, 대부분의 영상에서 화질에 전혀 열화를 수반하지 않고 기존 Neff의 고속방법보다 약 70%정도의 내적 연산량이 줄어듦을 알 수 있다.

• 대한치과교정학회지
• /
• 제34권2호
• /
• pp.121-129
• /
• 2004

이 연구의 목적은 세 가지 형태의 헤드기어를 이용하여 상악 제1대구치의 후방이동 시 치아 주위 조직에 나타나는 응력분포를 광탄성법을 이용하여 관찰하는 것이다. 광탄성 상악모형에 장착한 헤드기어에 high-pull, straight-pull, cervical-pull의 세 가지 방향에서, face bow의 inner bow와 outer bow를 평행하게 한 상태에서 outer bow의 길이를 세 가지로 다르게 하여 적용시킨 다음 원편광기를 이용하여 응력분포를 분석하였다. 사진기를 이용하여 응력분포를 기록하고, 등색선상의 무늬차수를 이용, 응력분포를 분석하여 이차원적인 광탄성 응력분석을 시행하였다. 그 결과는 다음과 같다. 1. high-pull 헤드기어의 경우, 중간 길이의 outer bow일 때 치체이동에 유리한 응력 분포가 나타났다 2. straight-pull 헤드기어의 경우, 긴 길이의 outer bow일 때 좀더 치체이동에 유리한 응력 분포가 나타났으나, outer bow의 길이에 따른 응력분포의 변화는 적었다. 3. cervical-pull 헤드기어의 경우, 긴 길이의 outer bow일 때 치체이동에 유리한 응력 분포가 나타났다. 임상에서 헤드기어를 이용하여 상악 제1대구치를 후방으로 치체이동시키기 위해서는 facebow outer bow의 높이를 조정하지 않는 경우에는 high-pull 헤드기어에서는 outer bow와 inner bow를 같은 길이로, straight-pull 및 cervical-pull 헤드기어에서는 outer bow를 더 길게 하여 사용하는 것이 추천된다.

• Journal of Veterinary Science
• /
• 제22권6호
• /
• pp.66.1-66.9
• /
• 2021

Background: Maedi/Visna virus (MVV) is a contagious viral pathogen that causes considerable economic losses to the sheep industry worldwide. Objectives: In China, MVV has been detected in several regions, but its molecular characteristics and genetic variations were not thoroughly investigated. Methods: Therefore, in this study, we conducted next-generation sequencing on an MVV strain obtained from northwest China to reveal its genetic evolution via phylogenetic analysis. Results: A MVV strain obtained from Inner Mongolia (NM) of China was identified. Sequence analysis indicated that its whole-genome length is 9193 bp. Homology comparison of nucleotides between the NM strain and reference strains showed that the sequence homology of gag and env were 77.1%-86.8% and 67.7%-75.5%, respectively. Phylogenetic analysis revealed that the NM strain was closely related to the reference strains isolated from America, which belong to the A2 type. Notably, there were 5 amino acid insertions in variable region 4 and a highly variable motif at the C-terminal of the surface glycoprotein (SU5). Conclusions: The present study is the first to show the whole-genome sequence of an MVV obtained from China. The detailed analyses provide essential information for understanding the genetic characteristics of MVV, and the results enrich the MVV library.

• Tribology and Lubricants
• /
• 제34권3호
• /
• pp.107-114
• /
• 2018

This paper presents a computational model of a gas foil journal bearing with shim foils between the top foil and bumps, and predicts its static and dynamic performance. The analysis takes the previously developed simple elastic foundation model for the top foil-bump structure and advances it by adding foil models for the "shim foil" and "outer top foil." The outer top foil is installed between the (inner) top foil and bumps, and the shim foil is installed between the inner top foil and outer top foil. Both the inner and outer top foils have an arc length of $360^{\circ}$, but the arc length of the shim foil is shorter, which causes a ramp near its leading edge in the bearing clearance profile. The Reynolds equation for isothermal and isoviscous ideal gas solves the hydrodynamic pressure that develops within the bearing clearance with preloads due to the ramp. The centerline pressure and film thickness predictions show that the shim foil mitigates the peak pressure occurring at the loading direction, and broadens the positive pressure as well as minimum film thickness zones except for the shortest shim foil arc length of $180^{\circ}$. In general, the shim foil decreases the journal eccentricity, and increases the power loss, direct stiffness, and damping coefficients. As the shim foil arc length increases, the journal eccentricity decreases while the attitude angle, minimum film thickness, and direct stiffness/damping coefficients in the horizontal direction increase.

• 복식문화연구
• /
• 제21권2호
• /
• pp.261-271
• /
• 2013

This study aimed to identify professional climbers'demand for movement functionality in pants worn for rock climbing and ice climbing. Data were collected through in-depth interviews with 12 professional climbers using a semi-constructed questionnaire. The respondents were instructor-level experts whose climbing ability ranged from 5.9 to 5.14 on the Yosemite Decimal System rating scale. The research findings were as follows. Experts wore different climbing pants depending on the type of climbing. For example, they mostly wore high-stretch, second layer pants for rock climbing, while layering first layer, second layer, and third layer pants for ice climbing. There were gender differences regarding the parts of the body in which climbers reported the most discomfort when wearing climbing pants; male climbers most commonly responded 'knees', 'inner thighs' and 'hips' while their female counterparts most commonly responded 'inner thighs', 'exposed back and waist' and 'hips' in that order. Differences were found between rock climbing and ice climbing in terms of wear and tear on pants, preferred fabric properties, and length of pants. Wear and tear was found mainly on the hips and knees of rock climbing pants and on the inner lower hem of ice climbing pants. Listed in the order of preference, the most preferred fabric properties were elasticity, light weight, and durability for rock climbing pants and elasticity, insulation, and protection against water and wind for ice climbing pants. Regarding the length of rock climbing pants, respondents preferred ankle-length pants and cropped pants that did not cover the feet. For ice climbing pants, respondents favored heel-length pants that prevented pieces of ice from entering the clothing. Men showed a high level of preference for ergonomically cut climbing pants. Respondents said the waistband on climbing pants should be simplified so as not to adversely affect climbing maneuvers.

• 대한의용생체공학회:의공학회지
• /
• 제18권3호
• /
• pp.253-259
• /
• 1997

Von Mises stress and compliance distribution was evaluated using a finite element analysis on the anastomosis of an artery with length of 20mm(z direction, along the horizental artery), inner diameter of 4mm, thickness fo 0.5mm and a PTFE graft with length of 5.7mm, inner diameter of 2mm, thickness of 0.2mm when anastomotic angle was $45^{\circ}$ and inner pressure of 1330 dyne/mm2 was applied inside the 2 conduits. From the analysis results were obtained as follows. (1) Artery diameter increased in both horizontal x(along the length of artery) and vertical y(perpendicular to the length of artery)directions and the magnitude of that in x direction was bigger than that in y direction. (2) The compliance was maximum on the anastomosis, especially on that with acute angle. The reduction of compliance was observed from the anastomosis area to the either right or left end. (3) The equivalent stress was maximum on top in the y direction and minimum on the nodes apart $110^{\circ}$ in circumferential direction from the top. (4) The equivalent stress was maximum in t도 vicinity of anastomosis with acute angle along the longitudinal direction of the artery. This trend was also observed along the PTFE graft.

• Archives of Pharmacal Research
• /
• 제15권2호
• /
• pp.152-161
• /
• 1992

Selective quenching of 1, 6-diphenyl-1, 3, 5-hexatriene (DPH) by trinitrophenyl groups was utilized to examine the transbilayer fluidity asymmetry of model membranes of phospholipids (SPMVPL) extracted from synaptosomal plasma membrane vesicles (SPMV). The polarization (P), anisotropy (r), limiting anisotropy $(r_\infty$), and order parameter (S) of DPH in the inner monolayer were 0.019, 0.014, 0.018, and 0.047, respectively, greater than calculated for the outer monolayer of SPMVPL. Selective quenching of DPH by trinitrophenyl groups was also utilized to examine the effects of n-alkanols on the individual monolayer structure of SPMVPL. n-Alkanols fluidized the hydrocarbon region of bulk SPMVPL and the potencies of n-alkanols up to 1-nonanon increased with carbon chain length. It appears that the potencies in bilayer fluidization increase by 1 order of magnitude as the carbon chain length increases by two carbon atoms. The cut-off phenomenon was reached at 1-decanol, where further increase in hydrocarbon length resulted in a decrease in pharmacological activity. The n-alkanols had greater fluidizing effects on the outer monolayer as compared to the inner monolayer of SPMVPL, even though these selective effects tended to become weaker as the carbon chain length increased. Thus, it has been proven that n-alkanols exhibit selective rather than nonselective fludizing effects within transbilayer domains of SPMVPL.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제32권6호
• /
• pp.566-574
• /
• 2006

Purpose : This study was performed to provide an anatomical information of the mandibular ramus for the successful inferior alveolar nerve block. Three dimensional images were reconstructed from the computerized tomography (CT) and the anatomical evaluation of the mandibular ramus was done. Materials and methods : Sixty-four patients who had been taken the facial CT scans from 2000, Jan to 2003, June was selected. The patients who had the anterior or posterior teeth misssing, edentulous ridge, and jaw fracture were excepted. In the occulusal plane, the lingual surface angle (LSA) between the mid-sagittal plane and the mandibular molar lingual surface from the 2nd premolar to the 2nd molar, the inner ramal surface angle (IRSA), the maximum inner ramal surface angle (MxIRSA), and the outer ramal surface angle (ORSA) to the-mid sagittal plane were measured. The inner ramal surface angle in the ligular tip level (IRSA-L) and the outer ramal surface angle in the ligular tip level (ORSA-L), the ramal length (RL), and the anterior ramal length (ARL) were also measured in the lingular tip level. Results : In the lingular tip level, the mean IRSA-L and ORSA-L were $28.6{\pm}6.3^{\circ}$ and $17.9{\pm}4.9^{\circ}$ respectively. The larger was the IRSA, the larger was the ORSA. In the lingular tip level, the mean ramal length was 35.8${\pm}$3.4 mm. The larger was the IRSA-L, the shorter was the ramal length. On the lingular tip level, the mean anterior ramal length from anterior ramus to lingular tip was 19.6${\pm}$3.3 mm. when the ramal length was longer, the anterior ramal length was also longer. On the lingular tip level, there was positive correlation vetween the IRSA and the ORSA, negative correlation between the IRSA and the ramal length, and positive correlation between the ramal length and the lingular tip level to the anterior ramus. There was no statistical meaning of data between sex and age. Conclusion : In the clinical view of the results so far achieved, if the direction of needle is closer to posterior it is able to contact bone on lingular tip when the internal surface of ramus is wided outer.

• 대한약리학회지
• /
• 제28권2호
• /
• pp.191-199
• /
• 1992

한국산 2년생 소의 대뇌피질로부터 synaptosomal plasma membrane vesicles(SPMV)를 분리한 후 이 SPMV로부터 추출한 총지질로서 인공세포막(SPMVTL)을 제제하였다. SPMVTL의 outer monolayer에 trinitrophenyl group을 공유결합시킴으로써 SPMVTL이중층에 분포된 형광 probe 1,6-diphenyl-1,3,5-hexatriene(DPH)중 outer monolayer에 분포된 DPH형광만을 소광케 하였다. 형광분석기를 통하여 SPMVTL의 inner monolayer에 비하여 outer monolayer의 유동성이 크다는 것을 확인하였다. n-Alkanols는 SPMVTL지질 이중층(inner+outer monolayers)의 회전확산운동을 증가시키되 탄소수 두개가 증가될 때마다 그 효력이 약10배 가량 증가된다는 것을 알았다. 그러나 1-decanol의 경우에는 1-nonanol에 비하여 그 효력이 낮아지는 소위 cut-off현상이 나타났다. 뿐만 아니라 n-alkanols는 SPMVTL의 inner monolayer에 비하여 outer monolayer의 회전확산운동을 주로 증가시켰다. 하지만 n-alkanols의 탄소수가 증가됨에 따라 outer monolayer에 대한 선택적인 작용이 감소된다는 것도 확인되었다.