• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.33-38
• /
• 2007

This paper reports an attempt to develop 7-wire steel tendon which is instrumented with optical FBG sensors. The tendon is devised to replace the king cable, which is located in the center of the tendon, by a steel tube in which the FBG sensor are attached along the hole using a high-mobility polyester resin. The circular steel tube has typical of 5 mm outer diameter and 1 mm inner diameter, and can easily be manufactured by means of an pultrusion process. Using the tube, in this study, three different types of one meter-long smart tendons are fabricated depending on mixture ratio of polyester resin and initiator. The performance of the FBG sensors as well as mechanical characteristics of the prototype are tested through the tensile test. Test results shows that the proposed smart tendon is in principle very effective for measuring the working strain of the tendon.

• 한국군사과학기술학회지
• /
• 제3권2호
• /
• pp.244-249
• /
• 2000

Thermal gradient chemical vapor infiltration (TG-CVI) process, which is one of the CVI techniques to densify a porous fiber preform, requires for a heater to have uniform surface temperature distribution. Thus, it is essential to design the shape of the heater and to predict the temperature distribution when the heater has a profile which is not a simple cylinder. In this study, an analytical method has been used to design the inner profile of a conical heater showing uniform temperature distribution, if its outer shape is specified. Temperature distribution on the heater surface has been calculated with the finite difference method and compared with the experimental results. When a heater had a combined profile with a large cone and a small cylinder, temperature was higher in the cylindrical part. To reduce the temperature difference between these areas, a hole-machining method has been proposed including other possible ones. A shape design and optimization program has been made to improve the temperature uniformity of the TG-CVI heater better than that designed with the analytical method.

• 산업공학
• /
• 제13권4호
• /
• pp.591-598
• /
• 2000

In this paper, an efficient algorithm is proposed to find parting lines(PL) and generate parting surfaces(PS) for an injection mold design. We used a Face-Edge Graph which can be made by B-rep information of solid model. The graph is useful for finding the peripheral-loop edges for PL and the inner-loop edges for hole-patch. The PS can be generated automatically by selecting pre-defined direction lines. We can create a core and cavity molds by trimming the raw stock block with the PS and the upper/lower faces of a product model. We implemented proposed method with Unigraphics API functions and C language, and tesed on Unigraphics V15.

• Journal of Korean Neurosurgical Society
• /
• 제37권5호
• /
• pp.386-388
• /
• 2005

The authors present a case in which an organized chronic subdural hematoma(CSDH) was incidentally found in a 9-year-old boy with no significant medical history after a pedestrian traffic accident. Preoperative magnetic resonance(MR) imaging showed calcification on the inner membrane and an irregular heterogeneous structure in the hematoma cavity. The findings from the preoperative brain computed tomogram(CT) and MR image were very useful for making the preoperative diagnosis and surgical decision. In choosing the proper surgical strategy for removing the organized CSDH, it was thought that burr hole trephination would present unnecessary difficulties. Thus, craniotomy was selected and the organized CSDH was successfully removed with no complications.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 추계학술대회 논문집
• /
• pp.181-188
• /
• 1999

For weight reduction of the gearbox of power bogie of high speed train, aluminum alloy is recommended for the material of the gerabox case. In this paper, three models(Steel G/B Case-Steel BRG. Case[model-S], Aluminum G/B Case-Aluminum BRG. Case[model-A], Aluminum G/B Case-Steel BRG. Case[model-AS]) were compared to each other in the view of thermal expansion. The evaluation of the internal load, thermal expansion deformation and lug analysis were executed. It results that the 'model-A' is excessively deformed and fail in the bolt hole of bearing case. Material change of the bearing case to steel(model-AS) is effective to restrain the deformation of the inner radios of the bearing case and to prevent the failure of that.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제7권10호
• /
• pp.377-382
• /
• 2018

본 연구는 홍삼 등급 판정을 위한 내부 상태 및 조직의 치밀도 분석 방법에 관한 것이다. 홍삼 내부 측정을 위해 1990년대 이후부터는 자기공명영상법(MRI), X-ray 판별 등의 비파괴 검사 방법에 대한 연구가 다양하게 이루어졌지만, 등급 판정에 가장 중요한 내공(內空), 내백(內白)을 파악하는데 어려움이 있어 정확한 내부 판정이 불가능하였다. 그리하여 본 연구에서는 적외선 조명 환경의 폐쇄형 영상 취득 장치를 제작하고 내공, 내백의 유무와 직경을 파악할 수 있는 내부 측정 시스템을 개발하였다. 제작한 장치는 홍삼 내부 투과율이 높은 950nm 파장대역의 적외선 조명, 적외선 대역 촬영이 가능한 카메라, 카메라에 홍삼의 초점을 자동제어 할 수 있는 Y축 제어 액추에이터 그리고 홍삼을 $1^{\circ}$의 간격으로 $360^{\circ}$ 회전하며 영상을 취득할 수 있는 회전 액추에이터로 구성이 되어있다. 제안하는 알고리즘은 Y축 액추에이터에서 Auto-Focus 알고리즘을 수행하여 홍삼의 크기와 두께 변화에 따라 객체의 선명한 초점을 자동으로 맞춰준다. 그다음 홍삼을 $1^{\circ}$ 간격으로 $360^{\circ}$ 회전하며 총 360장의 홍삼 영상을 취득하면 라돈 변환(Radon transform)을 통해 사이노그램(Sinogram)으로 재구성하고, 역 라돈 변환(Inverse Radon transform)을 통해 단층영상복원(Back-projection) 알고리즘이 수행되어 홍삼 내부 영상을 획득하였다. 알고리즘 수행 결과 홍삼 두께나 모양에 관계없이 내부 단면영상 획득이 가능하였고 영상을 통해 내공, 내백의 유무와 직경을 파악할 수 있었다. 추후 10,000개 이상의 다양한 모양과 크기를 가지는 홍삼에 대하여 내부 영상을 취득하여 등급 판별 기준을 적용한다면 신뢰성 있는 홍삼 등급 자동화 측정 방법으로 사용가능 할 것이다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권8호
• /
• pp.1240-1247
• /
• 2008

Leakage trouble on the sea water pipeline in engine room is often resulted from a localized corrosion due to severe corrosive environment caused by both high speed and high pressure of sea water flowing through the inner pipe. In addition, when the ship is in stand-by or emergency condition, underwater welding to control the leakage of sea water from a hole of its pipe is very important in an industrial safety point of view. In this study possibility of underwater welding to control leakage of sea water and corrosion property of its welding zone were investigated with the electrochemical methods by parameters of welding methods and welding electrodes when underwater welding is achieved with a such case that sea water is being leaked out with a height at 50mm from a hole of $2.5mm{\emptyset}$ of test pipe. Corrosion resistance of weld metal zone is better than the base metal and its hardness is higher than that of the base metal. However corrosion potential of weld metal zone showed a negative value than that of the base metal, therefore weld metal zone is preferentially corroded rather than the base metal by performance of galvanic cell due to difference of corrosion potential between weld metal zone and base metal. Eventually it is suggested that leakage of sea water is successfully controlled by underwater welding,

• Journal of Welding and Joining
• /
• 제24권2호
• /
• pp.71-78
• /
• 2006

It has been reported that good quality weld beads are not easily obtained during the $CO_2$ CW laser welding of primer coated plate. However, by introducing a small gap clearance in the lap position, the zinc vapor can escape through it and sound weld beads can be acquired. Therefore, this study examines for keyhole behavior by observing the laser-induced plasma and investigates the relation between keyhole behavior and formation of weld defect. Laser-induced plasma has accompanied with the vaporizing pressure of zinc ejecting from keyhole to surface of primer coated plate. This dynamic behavior of plasma was very unstable and this instability was closely related to the unstable motion of keyhole during laser welding. As a result of observing the composition of porosity, much of Zn element was found from inner surface of porosity. But Zn was not found from the dimple structure fractured at the weld metal. By analyzing of vaporizing element in laser welding, a component ratio of Zn was decreased by introducing a small gap clearance. Therefore we can prove that the major cause of porosity is the vaporization of primer in lap position. Mechanism of porosity-formation is that the primer vaporized from the lap position accelerates dynamic behavior of the key hole and the bubble separated from the key hole is trapped in the solidification boundary and romaines as porosity.

• 천문학회보
• /
• 제39권2호
• /
• pp.74.1-74.1
• /
• 2014

We study a wraping instability of a geometrically thin, non-self-gravitating disk surrounding binary supermassive black holes on a circular orbit. Such a circumbinay disk is subject to not only tidal torques due Line 8 to the binary gravitational potential but also radiative rorques due to radiation emitted from each accretion disk. We find tat a circumbinary disk initially aligned with the binary orbital plane is unstable to radiation-driven warping beyond the marginally stable warping radius, which is sensitive to both the ratio of vertical to horizontal shear viscosities and the mass-to-energy conversion efficiency. As expected, the tidal torques give no contribution to the growth of warping modes but tend to align the circumbinary disk with the orbital plane. Since the tidal torques can suppress the warping modes in the inner part of circumbinary disk, the circumbinaary disk starts to be warped at the radii larger than the marginally stable warping radius. If the warping radius is of the order of 0.1 pc, a resultant semi-major axis is estimated to be of the order of 10-2 pc to 10-4 pc for 107 Msun black hole. We also discuss the posibility that the central objects of observed warped maser disks in active galactic nuclei are binary supermassive black holes with a triple disk: two accretion disks around the individual black holes and one circumbinary disk surrounding them.

• 천문학회지
• /
• 제53권5호
• /
• pp.103-115
• /
• 2020

We analyze the spatially resolved kinematics of gas and stars for a sample of ten hidden type 1 AGNs in order to investigate the nature of their central sources and the scaling relation with host galaxy stellar velocity dispersion. We select our sample from a large number of hidden type 1 AGNs, which are identified based on the presence of a broad (full width at half maximum ≳1000 km s^-1) component in the Hα line profile and which are frequently mis-classified as type 2 AGNs because AGN continuum and broad emission lines are weak or obscured in the optical spectral range. We used the Blue Channel Spectrograph at the 6.5-m Multiple Mirror Telescope to obtain long-slit data with a spatial scale of 0.3 arcsec pixel^-1. We detected broad Hβ lines for only two targets; however, the presence of strong broad Hα lines indicates that the AGNs we selected are all low-luminosity type 1 AGNs. We measured the velocity, velocity dispersion, and flux of stellar continuum and gas emission lines (i.e., Hβ and [O III]) as a function of distance from the center. The spatially resolved gas kinematics traced by Hβ or [O III] are generally similar to the stellar kinematics except for the inner center, where signatures of gas outflows are detected. We compare the luminosity-weighted effective stellar velocity dispersions with the black hole masses and find that our hidden type 1 AGNs, which have relatively low back hole masses, follow the same scaling relation as reverberation-mapped type 1 AGN and more massive inactive galaxies.