• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2001년도 제23회 KOSCO SYMPOSIUM 논문집
• /
• pp.27-34
• /
• 2001

The soot formation characteristics have been studied experimentally in concentric co-flow ethylene/propane diffusion flames. Comparing to the homogeneously mixed propane/ethylene case, the increase of soot formation is observed when propane is supplied through the outer nozzle, while the decrease is observed when propane is supplied through the inner nozzle. The reaction path of PAHs formed from the pyrolysis process of propane is likely to be responsible to the observed difference. When propane is supplied through the outer nozzle, PAHs formed during the combustion process are easy to be exposed to the oxidization environment; however, when propane is supplied through the inner nozzle, PAHs are not likely to be oxidized and thus get involved in soot formation process. The synergistic effect in ethylene/propane diffusion flames is affected not only by the composition of mixture but also by the way of mixing.

• 지질공학
• /
• 제34권2호
• /
• pp.207-216
• /
• 2024

이 연구는 울릉도 나리분지 추산용천수의 유동 경로를 파악하는 것이다. 칼데라 내부 가장자리를 따라 발달하는 단층과 단열구조들의 발달 방향이 추산용천수 유동 경로에 영향을 주는 요소로 파악되었다. 추산용천수는 함양된 지하수가 동서 방향과 남북 방향의 단열대를 따라 추산용출소 방향으로 흐른다. 이와 더불어 북북동 방향으로 경사진 칼데라의 부등함몰의 영향으로 북동 내지 북북동 방향으로 흐르는 것으로 파악되었다. 장내세균과인 Entrobacteriaceae을 이용하여 나리지하수 쪽의 물이 추산용출소 방향으로 유동하는 것으로 파악되었다. 다만, 분석에 사용된 시료수가 매우 적어 성인계곡수로부터 나리분지와 추산용출소까지의 유동경로를 전체적으로 파악할 수 없다는 제한성이 있다.

• 수산해양기술연구
• /
• 제28권2호
• /
• pp.117-131
• /
• 1992

A studies on the pattern of sea water circulation was carried out by using drogue experiments, tidal current measurement and hydrographic data in Kamak Bay which has two channels. At the flood, the water inflowed from the northern narrow channel flows mostly to the southward then the westward because Daekyung-island located at the flow path, at the same time the water from the southern channel of bay directed strongly to the north with a spine centered at around Gunnaeri. And these waters converged at the area between eng-Island and Deakyung-Island in the bigining of the flow, and placed at less southern part than the area at the late. The water of the north west inner bay having concave bottom topography inflows to Najin inlet with a spin of anti-clockwise. At the ebb, those waters in the bay turn back to two channels respectively, but most of waters directed to the southern channel of the bay. The directions of residual current of two channels are the southward mainly, and the current of inner area are influenced by the prevailing wind. The north-west inner bay which has the weak tidal current less than 10 cm/sec shows a similar upwelling by off-shore wind in winter, and the stratification in summer, respectively.

• Nuclear Engineering and Technology
• /
• 제56권7호
• /
• pp.2458-2473
• /
• 2024

The turbulent flow in reactor pressure vessel (RPV) of pressurized water reactor (PWR) is important for the flow rate distribution at core inlet. Thus, it is vital to study the turbulent flow phenomena in RPV. However, the complicated fluid channel consisted of inner structures of RPV will block or refract the laser sheet of particle image velocimetry (PIV). In this work, the matched index of refraction (MIR) of sodium iodide (NaI) solution and acrylic was applied to support optical path for flow field measurements by PIV in the 1/10th scaled-down RPV model. The experimental results show detailed velocity field at different locations inside the scaled-down RPV model. Some interesting phenomena are obtained, including the non-negligible counterflow at the corner of nozzle edge, the high downward flowing stream in downcomer, large vortices above vortex suppression plate in lower plenum. And the intensity of counterflow and the strength of vortices increase as inlet flow rate increasing. Finally, the case of asymmetry flow was also studied. The turbulent flow has different pattern compared with the case of symmetrical inlet flow rate, which may affect the uniformity of flow distribution at the core inlet.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.500-502
• /
• 2008

In generally, a high pressure fuel injection pipe has been often used as a fuel supply line in automobiles or other diesel engines. Such conventional high pressure fuel injection pipe, however, has suffered from the problem that is folding and hair cracks created therein. The defects can be locally formed in the inner wall surface of the pipe at the connecting head leading to a flow path when the pipe is deformed by the heading process. In the study, in order to prevent the folding in the inner wall surface of the pipe during the heading process, FE-analysis has been used in the die design.

• 한국자동차공학회논문집
• /
• 제13권2호
• /
• pp.178-185
• /
• 2005

The synergistic effect of ethylene/propane mixture on soot formation is studied experimentally using a concentric co-flow diffusion burner, which provides the stratified fuel mixture. The soot volume fraction, soot particle diameter, number density and PAH concentrations are measured with various fuel supply configurations and compared to the homogeneously mixed case. When propane is supplied through the inner nozzle, an increase of soot formation is observed. However, when propane is supplied through the outer nozzle, a decrease is observed. The reaction path of PAH's formed from the pyrolysis process of propane is likely to be responsible to the observed differences. When propane is supplied through the outer nozzle, PAH's are formed in the relatively near oxidation region and exposed to the oxidization environment; on the other hand, when propane is supplied through the inner nozzle, PAH's are not likely to be oxidized and thus get involved in soot formation process. The synergistic effect in ethylene/propane diffusion flames is found to be affected not only by the com position of the mixture but also by the way of mixing.

• 건축역사연구
• /
• 제31권4호
• /
• pp.29-44
• /
• 2022

This thesis is a study to Haengnang(行廊, a series of buildings) of Sijeon(市廛, licensed markets), which was built along with palaces, Jongmyo(宗廟) and roads in order to establish Hanyang(漢陽) as the capital of Joseon (朝鮮). Sijeon, built on Jongno and Namdaemun-ro, the main roads in Hanyang, created two-row lands on both sides of the road, and formed Pimat-gil as an inner road between the Jeonbang and Doga. The formation of the city proceeded along with the maintenance of the water path, and the situation of the water path parallel to the flow of Sijeon was achieved. The Sijeon building was a spatial structure managed by independent rooms as a result of reflecting the unique operation method of Sijeon. The Sijeon of Hanyang had an impact on the formation of land, architecture, roads, and waterways, and acted as a major factor in determining the urban spatial structure of Hanyang City.

• 반도체디스플레이기술학회지
• /
• 제10권1호
• /
• pp.1-6
• /
• 2011

In this paper, the air flow induced by the rotating flat disk is numerically investigated in a hope to better understand the air flow structures inside the wax spin coater for a silicon wafer polishing station. Due to the complex inner geometry of actual spin coater such as the casing around the rotating ceramic block and servo motor, recirculation of air flow is inevitably found on the coating target if the internal space of spin coater is closed at the bottom and it could be the possible source of contamination on the wax coating. By numerical flow simulation, we found that it is necessary to install the air vent at the bottom and to apply the sufficient air suction in order to control the path of air flow and to eliminate the air recirculation zone above the spinning surface of coating target.

• 설비공학논문집
• /
• 제18권1호
• /
• pp.24-30
• /
• 2006

Three liquid cooling heat exchangers for cooling of telecommunication equipment were designed and their cooling performances were tested. The liquid cooling heat exchangers had twelve rectangular channels $(5\times3 mm)$ with different flow paths of 1, 4, and 12. Silicon rubber heaters were used to provide heat flux to the test section. Heat input was varied from 75 to 400 W, while flow rate and inlet temperature of working fluid were altered from 1.2 to 4.0 liter/fin and from 15 to 3$30^{\circ}C$, respectively. The 4-path heat exchanger showed lower and more uniform average inner temperatures between heaters and the surface of heat exchanger than those of the others. To obtain optimal distribution of working fluid to each channels of liquid cooling heat exchangers, 2-3-2 and 4-3 type tube distributors were designed, and their distribution performances of working fluid were numerically and experimentally investigated. The distributor of the 2-3-2 type showed superior distribution performance compared with those of the 4-3 type distributor.

• 한국전산구조공학회논문집
• /
• 제20권5호
• /
• pp.551-556
• /
• 2007

소화시스템에 사용되는 고압의 소화가스 저장용기에는 저장용기의 파손을 막아주는 안전밸브가 있다. 이러한 안전밸브의 내부에는 원형 박판의 파열 판이 들어 있는데, 저장용기의 내압이 위험수준에 도달하면 파열 판이 파손하여 내압을 배출하는 역할을 한다. 안전밸브의 설계인자는 파열 판의 두께, 안전밸브의 유로 직경, 플라스틱 패킹 링의 내부 직경 그리고 파열 판을 고정하는 볼트 안쪽의 필렛 반경이 있다. 이중에서 파열 판의 두께는 0.2mm로 고정을 하였다. 요인배치법을 사용하여 주효과를 결정하였고 회귀방정식을 유도하였다. 이러한 회귀방정식은 추후 안전밸브의 설계에 있어서 기초 설계 자료로서 활용할 수 있도록 실험 결과와 비교하여 검증하였다. 검증실험 및 회귀방정식에 의한 결과의 오차는 약 $2{\sim}5%$ 정도인 것을 확인하였다. 그리고 반응표면법을 사용하여 기밀테스트 압력인 25MPa에서 파열할 수 있는 안전밸브의 최적 모델을 결정하였다.