• 한국해안·해양공학회논문집
• /
• 제23권6호
• /
• pp.442-450
• /
• 2011

장기간 시행된 새만금 건설단계별 환경변화 분석을 위해 3차원 무작위 행보에 의한 입자추적 기법을 이용한 해석이 시도되었다. 방조제 공사로 만경 동진강 및 금강 하구역의 운동 양상이 크게 변화되었다. 변산반도 외해 부근 운동 감소와 호 내 북측구간의 흐름 정체가 특이하다. 조류 이동거리를 건설단계별로 평가한 결과도 유사한 결과를 보인다. 연직혼합형태의 변화 분석을 위해 수온, 염분을 고려한 밀도성층을 재현한 결과 방조제 착공 전 잘 혼합된 연직구조 형태는 공사 중 개방구간 존재 시 부분적으로 혼합된 구조로 변화되고, 완공 후에는 만경 동진강 하구 입구부에 염분쐐기 구역과 호소 측에는 강한 밀도성층이 발생한다. 해석결과 수평방향의 확산과 연직 방향의 혼합능력 감소로 새만금 내외측 수질환경에 부정적 영향으로 작용할 수 있음이 추론된다.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제15권1호
• /
• pp.1-9
• /
• 2007

This study concerns the characteristics of helical flow in a concentric and eccentric annulus with a diameter ratio of 0.52 and 0.9, whose outer cylinders are stationary and inner ones are rotating. Pressure losses and skin friction coefficients have been measured for fully developed flows of water and 0.2% aqueous of sodium carboxymethyl cellulose (CMC), respectively, when the inner cylinder rotates at the speed of 0-500 rpm. The effect of rotation on the skin friction is significantly dependent on the flow regime. In all flow regimes, the skin friction coefficient is increased by the inner cylinder rotation. The change of skin friction coefficient corresponding to the variation of rotating speed is large for the laminar flow regime, whereas it becomes smaller as Re increases for the transitional flow regime and, then, it gradually approach to zero for the turbulent flow regime.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2003년도 추계 학술발표회 논문집
• /
• pp.153-158
• /
• 2003

This study concerns the characteristics of helical flow in a concentric annulus with a diameter ratio of 0.52 and 0.9, whose outer cylinders are stationary and inner ones are rotating. Pressure losses and skin friction coefficients have been measured for fully developed flows of water and 0.2％ aqueous of sodium carboxymethyl cellulose(CMC), respectively, when the inner cylinder rotates at the speed of 0∼500rpm. The effect of rotation on the skin friction is significantly dependent on the flow regime. In all flow regimes, the skin friction coefficient is increased by the inner cylinder rotation. The change of skin friction coefficient corresponding to the variation of rotating speed is large for the laminar flow regime, whereas it becomes smaller as Re increases for the transitional flow regime and, then, it gradually approach to zero for the turbulent flow regime.

• 복합신소재구조학회 논문집
• /
• 제4권2호
• /
• pp.31-38
• /
• 2013

As the Sewer Pipe is transformed by the expansion of life cycle as a result of the technology development, flexible pipe is developed by the transformed environmental conditions. To change pipe design, three phases(compaction ration - inner deflection ratio - ring stiffness) should be considered in design conditions. The input data of pipe design were provided by compaction-inner deflection ratio-ring stiffness. M oreover, The guidelines of sewerage pipes should be considered by flexible pipes design criteria.

• 대한기계학회논문집A
• /
• 제20권2호
• /
• pp.540-552
• /
• 1996

In this paper, a compensation method of disturbance using a disturbance observer is proposed for a force control of a pneumatic robot manipulator. The generated torque by a pneumatic actuator can be estimated based on the pressure signals. The inner torque control system is constructed by feeding back the generated torque to improve the dynamic characteristics of the actuator. In order to reduce the influence of disturbances comprising friction torque, parameter variations of plant and environment and so on, the reaction torque control system is constructed with a disturbance observer which estimates the disturbances based on the reference input to the inner torque control system and the reaction torque sensed with a forced sensor. From some simulations and experiments, it is confirmed that the proposed control system is effective to improve the robustness for the friction torque and the parameter change of object in the force control of a pneumatic robot manupulator.

• 소성∙가공
• /
• 제19권7호
• /
• pp.405-410
• /
• 2010

Double layered tube that has been used for transportation and oil piping system is occasionally exposed to elevated temperature. The change in stress state at elevated temperature is important for the safe design of double layered tube. In this study, the variation of stress state for hydroformed double layered tube of which inner tube is stainless steel and outer tube is mild steel has been analytically analyzed. To characterize the thermal stress at elevated temperature, analytical model to provide thermal stresses between outer tube and inner tube was developed by using theories of elasticity and Lame equation. The feasibility of analytical model is verified by finite element analysis using ANSYS $CLASSIC^{TM}$, commercially available code. The variation of thermal stress at various thickness combination of inner and outer tube has also been investigated by proposed analytical model.

• 한국세라믹학회지
• /
• 제34권8호
• /
• pp.834-842
• /
• 1997

Controlled Ca impurity implanted inner crack-like pore in the high purity alumina single crystal, sapphire, had been created by micro-fabrication technique, which includes ion implantation, photo-lithography, Ar ion milling, and hot press technique. The morphological change and the healing of cracklike pore in Ca doped high purity single crystal alumina, sapphire, during high temperature heat treatment in vacuum were observed using optical microscopy. The dot-like surface roughening was developed and hexagon like crystal appeared on inner surface of crack-like pore after heat treatment. Bar type crystals, probably CaO.6Al2O3, were observed on the inner surface after 1 hour heat treatment at 1, 50$0^{\circ}C$, but this bar type crystal disappeared after 1 hour heat treatment at 1, $600^{\circ}C$. This disappearance means that there should be a little increase of Ca solubility limit to alumina at this temperatures.

• International Journal of Automotive Technology
• /
• 제8권5호
• /
• pp.593-598
• /
• 2007

A new continuously variable transmission for bicycles(B-CVT) is developed by using a traction drive mechanism having inner and outer spherical rotors. The B-CVT has high power efficiency, large torque capacity, improved drivability and good packageability. The ratio change mechanism for the B-CVT is very simple, in contrast with other traction drive CVTs. After completing a conceptual design, a performance analysis and a detail design, a prototype of the B-CVT has been manufactured. The prototype has rated power of 100 watts, pedal speed of 6 rad/s and an overall speed ratio of 1.0-4.0. A bench test and an actual bicycle test have been performed to verify the practicability of the B-CVT.

• Journal of Ecology and Environment
• /
• 제47권4호
• /
• pp.177-186
• /
• 2023

Background: Inner Mongolia, desertification is happening due to climate change and land use alterations. In order to evaluate desert restoration effectiveness, this study compares number of species and species diversity in restored (with planted trees), unrestored area, and the reference ecosystem (Ref-E, typical steppe and woody steppe). Results: The Ref-E had the most plant species (64 taxa), while the unrestored area had the fewest (5 taxa). Among restored areas (restored in 2012, 2008, 2005), older restoration sites had more species (18-42). Similarly, species richness (3.93-0.41) and diversity (1.99-0.40) were highest in the Ref-E and lowest in unrestored areas, with older restored sites having higher values. Conclusions: More plant species and diversity in older restoration areas suggest progress toward ecosystem stabilization, approaching the Ref-E. Therefore, tree planting in Inner Mongolia's Hulunbuir semi-arid desert is a successful restoration effort.

• 건축역사연구
• /
• 제26권3호
• /
• pp.19-30
• /
• 2017

This paper studies the style emergence of Liujin Dougong in the ancient Chinese architecture. Dougong is the bracket set of the ancient Chinese wood structural architecture, and Liujin Dougong is one of the late styles of Chinese Dougong. It emerged in the period of the Ming Dynasty and has been installed in imperial palaces and imperial temples till the late period of the Qing Dynasty. Through the long term field survey and documental investigation, this research found out the some prototypes of Liujin Dougong among the earlier Xia-ang style Dougongs in the Song and Yuan Dynasty architectures. The symptom of style change appeared in the bracket composition. In the beginning, because Shuatou, the horizontal member just on Xia-ang was needed to be fixed to the inner main structure system, it was changed to the diagonal member and replaced Xia-ang. It brought continuous changes, the other horizontal members of Dougong also began to change to the diagonal form. And in accordance with these compositional changes of Dougong members, the decoration of inner parts also began to change. This paper analyzed every step of the compositional and decorative changes from Xia-ang Dougong style to Liujin Dougong style. In the addition, it also proposed the typical model of Qing style Liujin Dougong of which tail end is not placed on the beam and is just placed under the purlin, based on the its own research and analysis.