• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.639-643
• /
• 2002

The main purpose of this study was to investigate the formation mechanisms of imperfections such as irregular humps, outer cavity and inner cavity in the laser fusion zone of diamond saw blade. Laser beam welding was conducted to join two parts of blade; mild steel shank and Fe-Co-Ni sintered tip. The variables were beam power and travel speed. The microstructure and elements distributions of specimens were analyzed with SEM, AES, EPMA and so on. It was found that these imperfections were responded to heat input. Irregular humps were reduced in 10.4∼17.6kJ/m heat input range. However there were no clear evidences, which could explain the relations between humps formation and heat input. The number of outer cavity and inner cavity decreased as heat input was increased. Considering both possible defects formations mechanisms, it could be thought that outer cavity was caused by insufficient refill of keyhole, which was from rapid solidification of molten metal and fast molten metal flow to the rear keyhole wall at low heat input. More inner cavities were found near the interface of the fusion zone and sintered segment and in the bottom of the fusion zone. Inner cavity was mainly formed in the upper fusion zone at high heat input whereas was in the bottom at low heat input. Inner cavity was from trapping of coarsened preexist pores in the sintered tip and metal vapor due to rapid solidification of molten metal before the bubbles escaped.

• International Journal of Korean Welding Society
• /
• 제2권1호
• /
• pp.21-24
• /
• 2002

The main purpose of this study was to investigate the formation mechanisms of imperfections such as irregular humps, outer cavity and inner cavity in the laser fusion zone of diamond saw blade. Laser beam welding was conducted to join two parts of blade; mild steel shank and Fe-Co-Ni sintered tip. The variables were beam power and travel speed. The microstructure and elements distributions of specimens were analyzed with SEM, AES, EPMA and so on. It was found that these imperfections were responded to heat input. Irregular humps were reduced in 10.4∼l7.6kJ/m heat input range. However there were no clear evidences, which could explain the relations between humps formation and heat input. The number of outer cavity and inner cavity decreased as heat input was increased. Considering both possible defects formations mechanisms, it could be thought that outer cavity was caused by insufficient refill of keyhole, which was from rapid solidification of molten metal and fast molten metal flow to the rear keyhole wall at low heat input. More inner cavities were found near the interface of the fusion zone and sintered segment and in the bottom of the fusion zone. Inner cavity was mainly formed in the upper fusion zone at high heat input whereas was in the bottom at low heat input. Inner cavity was from trapping of coarsened preexist pores in the sintered tip and metal vapor due to rapid solidification of molten metal before the bubbles escaped.

• 한국태양에너지학회 논문집
• /
• 제22권4호
• /
• pp.77-84
• /
• 2002

In order to investigate forced convection heat transfer due to the wind from the inner surface of a cavity receiver for a parabolic dish type solar energy collecting system, a two-dimensional rectangular cavity receiver is prepared and installed in a wind tunnel. The convection heat transfer coefficient of the inner surface of the receiver is dependent on the direction and the velocity of the wind. The attack angle of the cavity and the air velocity in the tunnel are controlled in a wide range so that the effects of the attack angle and the wind velocity on the heat transfer coefficient can be studied. The skirt is installed at the aperture of the cavity in order to reduce convective heat loss. The effects of the length and the installation angle of the skirt on convection heat transfer of the cavity are tested. It is found that convection heat loss can be significantly reduced by installing the skirt. Also, it is known that heat transfer from the cavity can be minimized if the angle of the skirt is $90^{\circ}$ to the outer surface of the cavity.

• 대한수의학회지
• /
• 제40권2호
• /
• pp.373-381
• /
• 2000

Serial ultrasonographic examinations were performed on pregnant Korean Jindo bitches. Measurements of inner chorionic cavity diameter and fetal head diameter were made from pregnancy day 15 to parturition. These measurements were converted retrospectively based on the day of parturition (day 0). The data of inner chorionic cavity diameter obtained from day -42 to day -25 and fetal head diameter obtained from day -24 to day -1 were used to prediction of parturition day. Formulas for the prediction of parturition day using the method of least squares were derived. These formulas were then used to predict parturition dates based on single measurements of inner chorionic cavity diameter or fetal head diameter in 17 additional pregnant Korean Jindo bitches. Predicted date of parturition was then compared to actual whelping date. In the prediction of parturition based on inner chorionic cavity diameter, 7 of 10 bitches were coincided prediction date and actual whelping date, and the prediction was accurate to within 1 day in 3 of 10 bitches. The prediction of parturition based on fetal head diameter was accurate to within 1 day in 6 of 7 bitches and within 2 days in 1 of 7 bitches. In conclusion, the ultrasound measurement of inner chorionic cavity diameter and fetal head diameter are practical and accurate tool in the prediction of parturition.

• 한국음향학회지
• /
• 제19권2호
• /
• pp.3-7
• /
• 2000

본 논문은 air cavity가 삽입된 중공 층상복합체 맨드릴형 광-음향센서의 감도특성에 관한 것이다. 유한요소법으로 air cavity의 두께, 포밍(foaming)층의 두께 및 맨드릴의 내경/외경비 등의 형상변수에 따른 광-음향센서의 감도특성을 분석하였다. 그 결과, 두꺼운 air cavity 및 얇은 포밍층이 설치되고, 상대적으로 높은 내경/외경 비를 갖는 맨드릴을 사용하는 것이 음향감도의 향상을 위하여 바람직하다. Air cavity를 삽입한 중공 층상복합체 맨드릴을 사용할 경우, 음향감도는 air cavity가 없는 중공 층상복합체 맨드릴형 센서에 비해 약 0.8dB 정도 향상되는 것으로 나타났다.

• 한국자동차공학회논문집
• /
• 제10권3호
• /
• pp.18-27
• /
• 2002

Flame behavior in inner and outer the cavity and flame temperature have an important influence on the formation and oxidation of NOx and soot. Therefore, in this study, the combustion chamber of toroidal and reentrant that have different flow characteristics of inside and outside the cavity and load, and so forth are determined as parameters of experimental conditions. An attempt has been made to obtain the effect of flame temperature and KL value in idler and outer cavity on the formation and oxidation of soot using the two-color method.

• Journal of Welding and Joining
• /
• 제21권3호
• /
• pp.58-67
• /
• 2003

In this study, the formation mechanism of discontinuities in the laser fusion zone of diamond saw blade was investigated. $CO_2$ laser weldings were conducted along the butt between Fe base sintered tip and carbon steel shank with sets of variable welding parameters. The effect of heat input on irregular humps, outer cavity, inner cavity and bond strengh was evaluated. The optimum heat input to have a proper humps was in the range of 10.4~$17.6kJm_{-1}$. With increasing heat input, both outer and inner cavities were reduced. The outer cavity was caused by insufficient refill of keyhole, while inner cavity was caused by trapping of bubble in molten metal. The bubble came from sintered tip and intensive vaporization at bottom tip of the keyhole. A gas formation and low melting point element vaporization were not occurred during welding. We could not find any relationship between bond strength and amount of discontinuities. Because the fracture were occurred in not only sintered tip but also carbon steel shank due to hardness distributions.

• Applied Microscopy
• /
• 제27권2호
• /
• pp.165-175
• /
• 1997

This paper aims to prove the effects of Squalene (SQ) on the cellular toxicity of 5-FU to the mouse which pretreated with SQ and then treated with 5-FU. The results of the group A (treated with only 5-FU) are as follows. The nucleus was destroyed at 24 hours and 48 hours group, however, somewhat repaired at 72 hours group. The dilated inner cavity and the irregular lamellae of the rough surfaced endoplasmic reticulum (RER) were observed continually until 72 hours group. The inner cavity of the smooth surfaced endoplasmic reticulum (SER) were dilated in all groups. However, the destroyed and the normal membrane were observed simultaneously at 72 hours group. The inner membrane of the mitochondria were almost repaired at 96 hours group. The results of the group B (treated with 5-FU and squalene) are as follows. The nucleus was a little influenced by the toxicity of 5-FU at 24 hours and 48 hours, RER were observed to keep the typical lamella structure of cisternae from 24 to 72 hours group, but inner cavity kept on dilating. In SER, inner cavity were also observed to flatten from 24 to 72 hours group. Mitochnodria were always shown normal. All cell organelles were simillar to those of normal groups at 96 hours. Accordingly, it can be said that the treatment of 50 prevents the cytotoxicity of 5-FU on cell organelles of liver cell and that is concerned with the formation of membrane system of cell organelles.

• 한국인터넷방송통신학회논문지
• /
• 제13권4호
• /
• pp.201-208
• /
• 2013

본 논문은 한쪽 면이 열린 동축 공동 공진기의 경험적 설계 방법에 대한 연구이다. 공진기의 내부 도체 반경과 공진기의 내경 그리고 길이를 이용하여 설계한다. 그러나 기본 동축 선로 이론을 적용하면 내부 도체 반경과 공진기의 내경 값에 관계없이, 길이 변화에 의해서만 공진 주파수와 Q값의 특성이 달라지는 것을 알 수 있다. 따라서 내부 도체 반경과 공진기 내경 그리고 길이의 영향을 알아내고, 경험적 설계를 통해 이론값과 설계값의 오차를 줄여 최적화된 공진기 설계 방법을 제안한다. 모의실험 결과를 바탕으로 공진기의 내경은 14 mm, 내부 도체 반경은 각각 2 mm, 5 mm, 10 mm 그리고, 공진기의 길이는 8.5 mm로 제작하였다. 제작된 공진기의 공진 주파수는 6.1, 5.7, 6.5 GHz로 측정되었다. 모의실험과 제작된 공진기를 측정한 결과에 의하면, 공진기의 길이가 10 mm이하일 때는 기본 동축 전송 이론을 직접 적용하고, 10 mm이상 일 때는 계산된 공진 주파수에 0.5 GHz보정인자 값을 더함으로써 비교적 오차가 작은 한쪽 면이 열린 동축 공동 공진기를 설계 할 수 있음을 알 수 있었다.

• 비파괴검사학회지
• /
• 제17권4호
• /
• pp.237-247
• /
• 1997

경계요소법에 최소 에너지기법을 적용하여 적외선 스캐닝을 이용한 물체 내부 미지의 공동(cavity)을 탐지하는 기하학적 역 열전도 문제의 해를 구하였다. 이 문제에서 경계요소식은 에너지 최소화 과정을 적용한, quadratic programming 문제로 전환되었으며, 가상적인 내부 경계가 실제 공동의 영역 내부에 위치하도록 정의되었다. 적외선 스캐닝 표면 온도가 측정 오차의 구속 조건을 만족하도록 가상 내부 경계에서의 온도 분포를 결정한 후, 이를 내부 경계 조건으로 하는 경계요소 해석을 수행하여 미지 경계의 위치를 결정하였다. 공동 탐지 알고리듬이 제시되었고 수치해석을 통하여 역 해법에 대한 최소에너지 기법의 효과를 분석하였다.