• The Journal of Advanced Prosthodontics
• /
• 제10권3호
• /
• pp.184-190
• /
• 2018

PURPOSE. To analyze stress distribution in premolars restored with inlays or onlays using various materials. MATERIALS AND METHODS. Three-dimensional maxillary premolar models of abutments were designed to include the following: 1) inlay with O cavity (O group), 2) inlay with MO cavity (MO group), 3) inlay with MOD cavity (MOD group), and 4) onlay (ONLAY group). A restoration of each inlay or onlay cavity was simulated using gold alloy, e.max ceramic, or composite resin for restoration. To simulate masticatory forces, a total of 140 N static axial force was applied onto the tooth at the occlusal contact areas. A finite element analysis was performed to predict the magnitude and pattern of stresses generated by occlusal loading. RESULTS. Maximum von Mises stress values generated in the abutment teeth of the ONLAY group were ranged from 26.1 to 26.8 MPa, which were significantly lower than those of inlay groups (O group: 260.3-260.7 MPa; MO group: 252.1-262.4 MPa; MOD group: 281.4-298.8 MPa). Maximum von Mises stresses generated with ceramic, gold, and composite restorations were 280.1, 269.9, and 286.6 MPa, respectively, in the MOD group. They were 252.2, 248.0, 255.1 MPa, respectively, in the ONLAY group. CONCLUSION. The onlay design (ONLAY group) protected tooth structures more effectively than inlay designs (O, MO, and MOD groups). However, stress magnitudes in restorations with various dental materials exhibited no significant difference among groups (O, MO, MOD, ONLAY).

• 대한치과의사협회지
• /
• 제54권8호
• /
• pp.651-657
• /
• 2016

Currently with the continuous development of ceramic and cementation materials, CAD-CAM(Computer-aided design/Computer-aided manufacture) restorations are becoming increasingly popular in esthetic dentistry. Preparation design is influenced by the selected restorative material, the fabrication method, and the ability to bond the restoration. For long-lasting CAD/CAM inlay/onlay restoration, clinicians should understand the basic knowledge of CAD/CAM restoration's cavity design to obtain the fracture resistance and proper fitting margin. This article gives an overview of preparation guidelines for CAD/CAM inlay/onlay restorations.

• 정보처리학회논문지A
• /
• 제12A권6호
• /
• pp.515-522
• /
• 2005

본 논문에서는 부분적으로 파손된 치아의 수복에 사용되는 인레이/온레이 인공치아를 효과적으로 모델링하는 기법을 제안한다. 인레이/온레이는 지대치에 부착되는 내면과 밖으로 들어나는 외면으로 구성된다. 내면은 지대치와의 밀착력을 확보하기 위하여 지대치의 삭제된 표면의 확장된 부분으로 Minkowski sum을 이용하여 모델링된다. 외면을 모델링하기 위해서는 표준치아 모델, 환자 치아 석고모형을 스캔한 메쉬 자료, 환자 치아교합을 측정한 FGP(functionally guided plane) 등 세 가지 정보와 DMFFD(direct manipulation free-form deformation)[19]과 MWD(multiple wires deformation)[17]의 3D 메쉬 변형 기술들을 이용한다. 표준치아 모델은 외면의 기본적인 형태를 결정하기 위하여 사용되는 반면 석고모형 데이터와 FGP는 환자 치아 인접면과 교합면마다 약간 다르지만 정확한 기능에 매우 중요한 고유 특성을 반영하기 위해 사용되는 정보이다. 이러한 정보들을 입력으로 DMFFD 기법과 MWD 기법을 각각 적용하여 인레이/온레이 인접면과 교합면을 메쉬 자료로 자동으로 생성해낸다. 연구된 기법은 치과의사에 의한 요구사항을 반영하여 생성된 메쉬 모델을 가시화하면서 보다 정확하게 인레이/온레이를 디자인할 수 있도록 구현되었다.

• 대한심미치과학회지
• /
• 제3권1호
• /
• pp.1-9
• /
• 1995

• 대한치과보철학회:학술대회논문집
• /
• 대한치과보철학회 1999년도 Asian Academy of Prosthodntics. Korean Academy of Prosthodontics
• /
• pp.75.1-75.1
• /
• 1999

• 대한치과의사협회지
• /
• 제26권8호통권231호
• /
• pp.700-704
• /
• 1988

• 한국컴퓨터그래픽스학회논문지
• /
• 제11권2호
• /
• pp.1-8
• /
• 2005

하나의 치아가 일부 파손되어 수복되어야 할 보철물을 인레이/온레이(Inlay/Onlay)라 한다. 본 논문에서는 3차원 메쉬 기반 모델에서 보다 정확한 인레이/온레이를 효과적으로 모델링하기 위한 기법을 제안한다. 인레이/온레이는 지대치와 접하는 내면과 밖으로 들어나는 외면으로 구성된다. 인레이/온레이의 내면 모델링은 2차원 다각선상의 Minkowski Sum 알고리즘을 이용하여 지대치와의 접합력을 확보한다. 그리고 미리 데이터베이스에 저장된 표준 치아 모델, 치과의사에 의해 만들어진 FGP(functionally guided plane) 및 메쉬의 변형 기법인 DMFFD(direct manipulation free-form deformation) 기법[16]과 MWD(multiple wires deformation) 기법[24]을 이용하여 외면을 모델링한다. 데이터베이스에 저장된 표준 치아는 인레이/온레이 외면의 형태를 결정하기 위해 사용되며, FGP는 환자의 인접면과 교합면의 특성을 반영하기 위해 사용되었다. 마지막으로 3차원 메쉬의 두 변형 기법인 DMFFD와 MWD 기법은 환자의 인접면과 교합면을 반영한 치아의 형태를 만들어 내기 위해 사용된다. 본 논문에서 제안한 방법은 인레이/온레이의 내면과 외면을 설계할 때 필요한 정보를 미리 설정하여 처리하므로 기존의 방법에 비해 짧은 시간에 보다 정확한 인레이/온레이를 설계할 수 있었다.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2001년도 추계학술대회(제116회) 및 13회 Workshop 제3회 한ㆍ일 치과보존학회 공동학술대회 초록집
• /
• pp.594-594
• /
• 2001

Increased demand for esthetic restorations has promoted a growing interest in tooth-colored restorations even in the posterior regions. Preparation for specific types of indirect inlay and onlays may vary because of differences in fabrication steps for each commercial system and variations in the physical properties of the restorative materials. Preparations for indirect inlay/onlay basically are meant to provide adequate thickness for restorative material and at the same time a passive insertion pattern with rounded internal angles and well defined margins after deciding what type of restoration is indicated.(omitted)

• 대한치과보철학회지
• /
• 제38권3호
• /
• pp.366-374
• /
• 2000

FRC/ceromer system provides the clinician with a durable, flexible, and esthetic alternative to conventional porcelain fused to metal crowns. FRC is the matrix which is silica-coated and embedded in a resin matrix. The ceromer material which is a second generation indirect composite resin contains silanized, microhybrid inorganic fillers embedded in a light-curing organic matrix. FRC/ceromer restoration has a several advantages: better shock absorption, less wear of occluding teeth, translucency, color stability, bonding ability to dental hard tissues, and resiliency. It has versatility of use including inlay, onlay, single crown, and esthetic veneers. With adhesive technique, it can be used for single tooth replacement in forms of inlay adhesion bridge. In single tooth missing case, conventional PFM bridge has been used for esthetic restoration. However, this restoration has several disadvantages such as high cost, potential framework distortion during fabrication, and difficulty in repairing fractures. Inlay adhesion bridge with FRC/ceromer would be a good alternative treatment plan. This article describes a cases restored with Targis/Vectris inlay adhesion bridge. Tooth preparation guide, fabrication procedure, and cementation procedure of this system will be dealt. The strength/weakness of this restoration will be mentioned, also. If it has been used appropriately in carefully selected case, it can satisfy not only dentist's demand of sparing dental hard tissue but also patient's desire of seeking a esthetic restorations with a natural appearance.

• Archives of Plastic Surgery
• /
• 제35권4호
• /
• pp.431-438
• /
• 2008

Purpose: The common deformity after the correction of unilateral cleft lip nasal deformity is nasal asymmetry, and it is caused by the hypoplasia of the pyriform aperture. To correct this, many procedures have been applied, but still many problems are present. Authors performed the inlay and onlay insertion of porous high density polyethylene sheet(1 mm thickness $Medpor{(R)}$ sheet) in the hypoplastic pyriform margin of cleft side and obtained satisfactory results. Methods: 11 cases were performed and the mean follow up period was 15.1 months. Their mean age was 23.6 years. Under general anesthesia, bilateral pyriform margin was exposed. $Medpor{(R)}$ sheets in "match stick" like shaped were inlay inserted, and kidney shaped were onlay inserted fixating with two 6 mm titanium screws. After the surgery, the results was evaluated by photogrammetric analysis. On the basal view, the distance from the subalare and labiale superius' to the transverse baseline connecting the both cheilions was measured from the cleft side and the non-cleft side. Then, the postoperative symmetry was assessed by obtaining the cleft side against the non-cleft side as proportion index, defined as lateral and medial upper lip contour index. Results: There were 2 infections. The cause was because the inserted implant was too long and thus protruded to the base of nasal cavity. The lateral upper lip contour index was from 95.49 to 103.27, and medial upper lip contour index was from 90.92 to 100.49, it was statistically increased, and thus the symmetry was improved. However clinically mild depression remained at nostril floor. Conclusion: Authors performed porous high density polyethylene sheet inlay and onlay insertion for the hypoplasia of the pyriform margin in unilateral cleft lip nasal deformity. It was found that depressed pyriform margin and upper lip were corrected effectively except for the nostril floor, for which an additional soft tissue augmentation would be necessary. The inlay insertion has risk of protrusion, thus the guideline of the use of artificial prosthesis should be observed strictly.