• Clinical and Experimental Reproductive Medicine
• /
• v.41 no.1
• /
• pp.9-14
• /
• 2014

Objective: The aim of this study was to evaluate the efficiency of the intracytoplasmic morphologically selected sperm injection (IMSI) technique compared with conventional ICSI and previous ICSI attempts in oligo-astheno-teratozoospermia (OAT) patients. Methods: The sperms were selected under high magnification ($6,600{\times}$) and used to induce fertilization in previous ICSI patients by IMSI. These results were compared with previous conventional ICSI cycles in patients with OAT infertility. Results: These results demonstrated no significant difference in the fertilization rate between IMSI and previous ICSI cycles (67.7% vs. 65.0%). However, the pregnancy and implantation rates with IMSI were significantly higher than those of the ICSI cycles (33.3% vs. 12.5% and 14.6% vs. 5.4%, respectively; p<0.05). The miscarriage rate among pregnant patients (18.2% vs. 37.5%) showed no statistically significant difference between groups. Conclusion: Compared to conventional ICSI, this study found that IMSI increased the IVF-ET success rates in patients with OAT.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.376-379
• /
• 2004

The purpose of this work is to develop an effective active control system for combustion instabilities of premixed combustors. For the first step, the natural modes of combustion oscillation were investigated for a methane-air premixed combustor and the controls by secondary fuel injection were examined. The main premixed flame is stabilized by a swirler with orifices for secondary injection installed on the central hub. For sensing purposes, a pressure transducer and a chemiluminescence sensor were placed on the appropriate positions. The acoustic characteristics and the source of the oscillation were analyzed by those signals. To test the controllability, two methods of actuations by secondary fuel injection were examined. One is the open loop control and the other is the closed loop control. The comparison of the reduction levels of p $_{rms}$ shows that the closed loop control with a phase-shift injection performs best in this condition.ition.n.

• Korean Journal of Clinical Pharmacy
• /
• v.8 no.1
• /
• pp.54-58
• /
• 1998

The stability of ceftriaxone sodium 100 mg/ml in the water for injection was tested at two temperature conditions (refrigerator and room temperature) and two storage containers (vitro and syringe). The stability of each sample was determined by high-performance liquid chromatography while storing for 5 days at room temperature and 27 days at refrigerator. The concentration of ceftriaxone sodium was 100 mg/ml which the hospital usually use as a filling preparation for I.V. push or Y-site injection. There was no significant difference between the storage in vials and syringes. There was no significant difference in the change of concentration until storing the reconstituted ceftriaxone sodium injection for 2 days at room temperature and 14 days at refrigerator. In conclusion, the ceftriaxone sodium 100 mg/ml in the water for injection can be stored in vial or syringe for 2 days at room temperature and 14 days at refrigerator after preparation.

• Journal of Korean Foot and Ankle Society
• /
• v.17 no.4
• /
• pp.309-315
• /
• 2013

Purpose: The purpose of the study was to investigate five cases with chronic Achilles tendon rupture that occurred after steroid injections. Materials and Methods: In our hospital, we experienced five cases of chronic Achilles tendon rupture from September 2010 to March 2012. All patients had got steroid injection for Achilles tendinitis at the other hospitals, and their heel pain was aggravated when they visited our outpatient department. After treatment, signs and symptoms of Achilles tendon rupture were developed and the diagnosis was confirmed by ultrasonography or magnetic resonance imaging (MRI). Surgical treatment was done for Achilles tendon rupture. Results: There was difference between intra-operative findings of Achilles tendon rupture and usual chronic Achilles tendon rupture. Unlike usual findings of chronic Achilles tendon rupture whose scar tissue or tissue attenuation are found around the defect area of Achilles tendon, there were partial necrosis of tendon severe adhesion with surrounding tissue, extensive defect and longitudinal rupture on ruptured area. Also, severe inflammation of paratenon, granulation and fibrinoid deposit were found on biopsy findings in four cases. Conclusion: Based on review of data about relative risk and benefit of local corticosteroid injection to inflammatory lesion in Achilles tendon, it requires more attention to Achilles tendon rupture following local corticosteroid injection.

• Design & Manufacturing
• /
• v.11 no.3
• /
• pp.25-28
• /
• 2017

The production of carbon fiber reinforced thermoplastics(CFRTP) parts using an injection/compression molding process that differs from the conventionally used fabrication methods was investigated Before the application of composite molding in the injection/compression molding process, a simple compression molding experiment was performed using a hydraulic press machine to determine the characteristics of resin impregnation and to obtain a basic physical property data for the CFRTP. Based on these results, injection/compression molded specimens were manufactured and an additional insert/over molding process was applied to improve the impregnation rate of the molded specimens. The results demonstrated that the tensile strength of the molded parts using the faster injection/compression process was similar to that of a hydraulic press molded product.

• International Journal of Automotive Technology
• /
• v.8 no.2
• /
• pp.127-135
• /
• 2007

The objective of this study is to analyze the effect of velocity and vorticity on stratified mixture formation in the visualization engine. In order to investigate spray behavior, the pray velocity is obtained through the cross-correlation PIV method, a useful optical diagnostics technology and the vorticity calculated from the spray velocity component. These results elucidated the relationship between vorticity and entropy, which play an important role in the diffusion process for the early injection case and the stratification process for the late injection case. In addition, we quantified the homogeneous diffusion ate of spray using entropy analysis based on Boltzmann's statistical thermodynamics. Using these methods, we discovered that the homogeneous mixture distribution is more effective as a momentum dissipation of surrounding air than that of the spray concentration with a change in the injection timing. We found that the homogenous diffusion rate increased as the injection timing moved to the early intake stroke process, and BTDC $60^{\circ}$ was the most efficient injection timing for the stratified mixture formation during the compression stroke.

• Journal of Yeungnam Medical Science
• /
• v.36 no.2
• /
• pp.109-114
• /
• 2019

Background: Transforaminal epidural block (TFEB) is an effective treatment option for radicular pain. To reduce complications from intravascular injection during TFEB, use of imaging modalities such as real-time fluoroscopy (RTF) or digital subtraction angiography (DSA) has been recommended. In this study, we investigated whether DSA improved the detection of intravascular injection during TFEB at the whole spine level compared to RTF. Methods: We prospectively examined 316 patients who underwent TFEB. After confirmation of final needle position using biplanar fluoroscopy, 2 mL of nonionic contrast medium was injected at a rate of 0.5 mL/s under RTF; 30 s later, 2 mL of nonionic contrast medium was injected at a rate of 0.5 mL/s under DSA. Results: Thirty-six intravascular injections were detected for an overall rate of 11.4% using RTF, with 45 detected for a rate of 14.2% using DSA. The detection rate using DSA was statistically different from that using RTF (p=0.004). DSA detected a significantly higher proportion of intravascular injections at the cervical level than at the thoracic (p=0.009) and lumbar (p=0.011) levels. Conclusion: During TFEB at the whole spine level, DSA was better than RTF for the detection of intravascular injection. Special attention is advised for cervical TFEB, because of a significantly higher intravascular injection rate at this level than at other levels.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.22 no.6
• /
• pp.437-442
• /
• 2022

Background: Propofol is a short-acting intravenous sedative widely used for procedural sedation and general anesthesia. However, pain during propofol injection is a distressing adverse effect. This study was designed to investigate whether transcutaneous electrical nerve stimulation (TENS) could reduce pain during propofol injection compared to sham TENS. Methods: In a randomized controlled trial, 80 patients were allocated to two groups: the active TENS group received electrical stimulation via two electrodes on the venous cannulation site, whereas the sham TENS group received no stimulus. After 20 min following TENS, propofol 0.5 mg/kg pain was injected intravenously and pain was evaluated using a four-point score (0 = none, 1 = mild, 2 = moderate, 3 = severe). Adverse effects associated with TENS were also recorded. Results: The overall incidence of pain during propofol injection was 47.5% in the TENS group and 87.5% in the sham group (P < 0.001). The incidence of moderate pain was significantly lower in the TENS group (7.5%) than in the sham TENS group (42.5%) (P < 0.001). There were no complications associated with TENS. Conclusion: Pre-treatment with TENS significantly reduced the incidence and intensity of pain during propofol injection.

• Physical Therapy Rehabilitation Science
• /
• v.12 no.1
• /
• pp.48-55
• /
• 2023

Objective: The purpose of this study is to compare the effects of extracorporeal shock wave therapy (ESWT) and injection therapy through qualitative and quantitative analysis by synthesizing randomized controlled trials (RCTs) conducted on patients with various shoulder diseases. Design: A systematic review and meta-analysis of randomized controlled trials Methods: This review conducted a literature search through international electronic databases in January 2023 to compare the effects of ESWT and injection therapy. Qualitative analysis was performed as a risk of bias tool, and quantitative analysis was synthesized with a random effect model to show the effect size as a standardized mean difference (SMD). Results: Five RCTs involving 298 individuals with shoulder disorders were included in this systematic review and meta-analysis. ESWT showed a moderate effect on pain (SMD=-0.44; 95% CI, -0.95 to 0.06) and a large effect on shoulder function (SMD =-0.81; 95% CI, -1.70 to 0.07) than injection therapy. A significant difference was found in the shoulder range of motion, showing a large effect size (SMD=1.50; 95% CI, 0.58 to 2.43). Conclusions: When considering treatment options for the management of patients complaining of shoulder disorders, it is appropriate to recommend ESWT first rather than injection therapy to increase the range of motion of the joint. In addition, ESWT is safe for pain control and shoulder function improvement, and a positive prognosis could be expected.

• 순환기질환의공학회:학술대회논문집
• /
• 2005.12a
• /
• pp.17-20
• /
• 2005