• 대한약리학회지
• /
• 제1권1호
• /
• pp.17-36
• /
• 1965

Besides it's all important analgesic action, morphine has, among others, hyperglycemic effect, though not important clinically, which is believed to be resulted from augmented glycogenolysis in the liver and muscles due to the increased liberation of epinephrine from the adrenal medulla upon the stimulation of the posterior part of hypothalamus. It is known that adrenergic blocking agents are acting inhibitory to this sort of hyperglycemia. Much, however, should as yet be studied for the drugs which affect central nervous system and release of endogenous catecholamine as far as their effects on hyperglycemia are concerned. Much is still not known about the effect of ginseng, which has been highly regarded in the Herb Medicine, as far as it's influence on the blood sugar is concerned. Author investigated the effects of chlorpromazine, reserpine and ginseng on epinephrine induced, and morphine-induced hyperglycemiae. Animals used in this experiment were healthy albino rabbits weighing approximately 2.0 kg of body weight and were all fasted for 24 hours, before the experiment undertaken. Blood sugar determination was carried out by Nelson-Somogy method. Results obtained are summarized as follows; 1. The groups of rabbits administered intravenously with epinephrine 0.02 mg/kg, and 0.05 mg/kg, showed marked and transient hyperglycemia within 15 minutes after injection. The maximal rate of elevation in blood sugar to the control level, were 28% and 57% respectively. The blood sugar returned to the control level within 3 hours. Thus, the hyperglycemic responses were paralleled with epinephrine doses. 2. The hyperglycemic responses by morphine were different according to the doses. The groups of rabbits in which 4 mg/kg of morphine was administered, did not show any hyperglycemic effect, but, in which 10 mg/kg of morphine administered, showed severe hyperglycemic effect, resulting in the maximal level within 2 hours after injection. The maximal rate of increasing in blood sugar ,level was 88%. Compared .with epinephrine-injected groups, morphjne-injected groups showed more persistent hyperglycemic effect, but returned to control blood sugar .level in 6 hours after injection. 3. The intravenous injection of chlorpromazine 2 mg/kg and 8 mg/kg evoked a slight, and persistent hyperglycemia. The maximal rate of increasing in blood sugar level were 15% and 23% respectively. These hyperglycemia gradually returned to the normal level in 5 or 6 hours after injection. Thus, the intensity of response was paralleled with the dose of chlorpromazine. 4. The intravenous injection of reserpine 0.2 mg/kg and 0.5mg/kg, showed the most persistent but steady elevation of blood sugar level in this experiments, resulting in the maximal level in 5 hours after injection. The maximal rate of increasing of blood sugar level were 18% and 39% respectively. 5. The blood sugar level from 24 hours to 30 hours after intraperitoneal administration of reserpine 1.0mg/kg, did not show statistically significant difference, compared with control groups. 6. The oral administration of ginseng extract 15 ml/kg did not. show any :change in blood sugar level. 7. The intravenous administration of epinephrine 0.05 mg/kg or morphine 4 mg/kg to the group pretreated with ginseng extract 15 ml/kg $20{\sim}30$ minutes before the experiment, evoked more marked hyperglycemic effect than the non-pretreated group. 8. The intravenous administration of epinephrine 0.02 mg/kg, morphine 4 mg/kg, or morphine 10 mg/kg to the groups pretreated with reserpine 0.2 mg/kg or 0.5 mg/kg $20{\sim}30$ minutes before experiment, produced more marked and persistent hyperglycemic effects than the groups injected with single epinephrine or morphine injection. 9. When epinephrine 0.05 mg/kg or morphine 10 mg/kg administered intravenously to the groups pretreated with the intraperitoneal administration of reserpine 1 mg/kg 24 hours before experiment morphine-induced hyperglycemia was inbibited, but epinephrine-induced hyperglycemia was augmented. 10. When epinephrine 0.05mg/kg or morphine 10 mg/kg administered intravenously to the groups pretreated with chlorpromazine, 2 mg/kg, 4 mg/kg, and 8 mg/kg $20{\sim}30$ minutes before the experiment, morphine-induced hyperglycemia was inbibited, but epinephrine-induced hyperglycemia was more persistent.

• Journal of Korean Neurosurgical Society
• /
• 제42권6호
• /
• pp.492-494
• /
• 2007

We present a case with seizure, confusion, hypesthesia and paraplegia after intrathecal injection of fluorescein. A 41-year-old man was admitted to our institution for the management of the CSF leakage. Intrathecal injection of fluorescein was performed and he complained of severe pain and numbness in the lower extremities at the end of the injection. Four hours later, he exhibited confusion, paraparesis and two episodes of generalized seizures. Two days later, he showed paraplegia and all sensory modalities below the T12 level were absent. Spine magnetic resonance imaging revealed myelopathic change in the lower thoracic spinal cord. There was no improvement of weakness and sensory deficits in lower extremity even 14 days after fluorescein injection. We speculated that thoracic myelopathy was associated with the intrathecal injection of fluorescein. In spite of its rarity, the complication after intrathecal injection of fluorescein could be serious. Thus, obtaining an informed consent with discussion with patient before the procedure is mandatory.

• Asian-Australasian Journal of Animal Sciences
• /
• 제33권12호
• /
• pp.1985-1990
• /
• 2020

Objective: The objective of this experiment was to investigate the effects of fat-soluble vitamin injection on plasma and tissue vitamin status in nursery pigs. Methods: A total of 16 pigs (initial body weight: 7.15±1.1 kg) were allotted to 2 treatments at d 7 post-weaning. Pigs were fed a corn-soybean meal-based basal diet with no supplemental vitamin A and i.m. injected with 300,000 IU of retinyl palmitate, 900 IU of d-α-tocopherol and 30,000 IU of vitamin D₃ with control pigs having no vitamin injection. Blood (d 0, 3, 7, and 14 post-injection) and tissue samples (liver, brain, heart, lung, and muscle; d 7 and 14 post-injection) were collected from pigs. Retinyl palmitate, retinol, and α-tocopherol concentrations were analyzed in plasma and tissues, while plasma was assayed for 25-hydroxycholecalciferol (25-OHD₃). Results: Plasma retinol and 25-OHD₃ concentrations increased by the vitamin injection from d 3 to 14 post-injection (p<0.05) whereas plasma retinyl palmitate was detected only in the vitamin treatment at d 3 and 7 post-injection (115.51 and 4.97 ㎍/mL, respectively). Liver retinol, retinyl palmitate, and retinol+retinyl palmitate concentrations increased by retinyl palmitate injection at d 7 and 14 post-injection (p<0.05) whereas those were not detected in the other tissues. The d-α-tocopherol injection increased α-tocopherol concentrations in plasma at d 3 and 7 post-injection (p<0.05) and in liver, heart (p<0.10), and muscle (p<0.05) at d 7 post-injection. Conclusion: Fat-soluble vitamin injection increased plasma status of α-tocopherol, retinol, retinyl palmitate and 25-OHD₃. As plasma levels decreased post-injection, vitamin A level in liver and vitamin E level in muscle, heart and liver increased. The α-tocopherol found in plasma after injection was distributed to various tissues but retinyl palmitate only to the liver.

• 한국전자파학회논문지
• /
• 제25권11호
• /
• pp.1164-1171
• /
• 2014

Bulk Current Injection(BCI) 테스트는 전류 주입 프로브를 사용하여 측정하고자 하는 Integrated Circuit(IC)에 전류를 주입하여 Electromagnetic Compatibility(EMC) 규격을 충족시키는지 시험하는 방법이다. 본 논문에서는 국제전기표준회의에서 제정한 IEC 62132-part 3에서 규정하는 BCI 테스트의 전류 주입 프로브를 대체하여, RF 잡음을 인가할 수 있는 마이크로스트립 커플러 구조를 제안하였다. 전통적으로 높은 전원 전압을 사용하는 자동차 IC 테스트에 사용되어 오던 BCI 전류 주입 프로브를 저 전압을 사용하는 저 전력 IC의 테스트에 사용할 수 있는 마이크로스트립 커플러 구조를 개발하여 그 유효성을 100 MHz에서부터 1,000 MHz까지의 주파수 영역에서 비교 및 검증하였다. 또한, 주파수에 따라 전류 주입 프로브를 통한 RF 잡음 인가와 마이크로스트립 커플러 구조를 통한 RF 잡음 인가 시 규정한 노이즈를 얻는데 필요한 전력을 dBm 단위로 측정, 비교하여 마이크로스트립 커플러 구조를 이용한 경우에 더 적은 전력으로 필요한 RF 잡음을 주입할 수 있음을 확인하였다.

• 대한약리학회지
• /
• 제32권2호
• /
• pp.259-267
• /
• 1996

In an attempt to dofine the early biochemical determinants that participate in the pathogenesis of glycerol-induced nephrotoxicity, especially focusing on oxygen free radicals and $N-acetyl-{\beta}-D-glucosaminidase$ (NAG) activity, we studied 24-hours urine outflow, 24-hours urinary protein excretion and urinary NAG activity after the injection of glycerol and also we studied malondialdehyde(MDA) level and superoxide dismutase(SOD) activity in the kidney of rats at 24hr after the injection of glycerol. Sprague-Dawley albino rats weighing 240 to 260 gm were injected intramuscularly with a 50% solution of glycerol(2ml/kg, 4ml/kg and 8ml/kg). The group treated with glycerol showed significantly lower urine outflow level and urinary protein excretion level and higher urinary NAG activity after the injection as compared to those of control group. Also the group treated with glycerol showed significantly higher MDA level and lower SOD activity at 24hr after the injection as compared to those of control group. These results suggest that the excessive oxygen free radicals resulting from the depression of SOD activity is an important determinant in the pathogenesis of glycerol-induced nephrotoxicity and higher urinary NAG activity is an index of renal tubular cell damage in the glycerol-induced nephrotoxicity.

• 한국자동차공학회논문집
• /
• 제2권6호
• /
• pp.102-109
• /
• 1994

As a fundamental study to apply high pressure injection system to direct injection diesel engine, fuel injection system and constant volume combustion chamber were made and the behaviors of evaporating spray with the variation of injection pressure and the ambient gas temperature were observed by using high speed camera, and the combusion characteristics with the variation of injection pressure and A/F ratio were analyzed. As injection pressure increases, spray tip penetration and spray angle increase and, as a results spray volume increases. This helps an uniform mixing of fuel and air. Spray liquid core length decreases as ambient gas temperature increases, while it decreases as injection pressure increases but the effect of ambient gas temperature is dorminant. As injection pressure increases, ignition delay is shortened and combustion rate being raised, maximum heat release rate increases. It become clear that High injection pressure has high level of potential to improve the performance of DI-diesel engine.

• Geomechanics and Engineering
• /
• 제18권1호
• /
• pp.59-69
• /
• 2019

Grout injection is mainly used for permeability reduction and/or improvement of the ground by injecting grout material into pores, cracks, and joints in the ground. The oscillatory grout injection method was developed to enhance the grout penetration. In order to verify the level of enhancement of the grout, field grout injection tests, both static and oscillatory tests, were performed at three job sites. The enhancement in the permeability reduction and ground improvement effect was verified by performing a core boring, borehole image processing analysis, phenolphthalein test, scanning electron microscopy analysis, variable heat test, Lugeon test, standard penetration test, and an elastic wave test. The oscillatory grout injection increased the joint filling rate by 80% more and decreased the permeability coefficient by 33-68%, more compared to the static grout injection method. The constrained modulus of the jointed rock mass was increased by 50% more with oscillatory grout injection compared to the static grout injection, indicating that the oscillatory injection was more effective in enhancing the stiffness of the rock mass.

• 대한의용생체공학회:의공학회지
• /
• 제22권3호
• /
• pp.275-283
• /
• 2001

This study was performed to extract and analyze the biosignals to find the relationship between the level of anesthesia and the variations of physiological parameters during epidural anesthesia. Seven male and twenty female patients(ages from 45 to 70 years old) were participated for the experiment, and ECGs, PPGs, SKTs, SCRs were obtained during anesthesia. As results, the HF/LF ratios of HRV were decreased after the injection anesthetics. For skin temperatures, values measured from the palm was reduced and the temperatures from four channels, measured from armpit through the right side of the body, were increased. SCRs were decreased for all channels after the injection of anesthetics. However the heart rate and PPGs showed no significant changes. It was concluded that the injection of anesthetics result the changes in biosignals, and it could be explained by the degree of the sympathetic and/or parasympathetic nerve activities. Results of this study could provide the valuable information for the estimation of level for the spinal and general anesthesia, and could be extended to the development of a system which could quantify the level of anesthesia.

• 항공우주시스템공학회지
• /
• 제7권2호
• /
• pp.55-59
• /
• 2013

Before avionics equipment are installed in aircraft, several environmental tests such as temperature, vibration, lightning, fire etc. must be conducted. One of the environmental tests is to substantiate protection designs of lightning indirect effect. It can be showed through RTCA DO-160G, section22 "Lightning Induced Transient Susceptibility" test. An additional test of aircraft level is required as well after installation of avionics equipment.

• 소성∙가공
• /
• 제22권1호
• /
• pp.48-53
• /
• 2013

As the adoption of injection molding technology increases, injected-molded optical products require higher dimensional accuracy and optical stability than ever before. In the present study, four kinds of molding methods, i.e., conventional injection molding (CIM), injection/compression molding (ICM), rapid heat and cooling the mold(RHCM) and rapid injection/compression molding (RICM) were selected in order to investigate the optical anisotropy of a 7 inch Light Guide Plate(LGP) by examining the gap-wise distribution of birefringence and the extinction angle. The results indicate that the compression process can decrease flow-induced birefringence over the whole region and that rapid heating can decrease the birefringence level better than conventional molding. In addition, for the combination of compression and rapid heating a reversal flow was detected from the distribution of the extinction angle near the gate.