• Clinical and Experimental Reproductive Medicine
• /
• v.50 no.4
• /
• pp.285-291
• /
• 2023

Objective: Infertility can result from a diminished ovarian reserve, but a potential remedy exists in the form of platelet-rich plasma (PRP) administration. This treatment involves both biological factors and tissue trauma mechanisms, which stimulate folliculogenesis, making it a promising and effective strategy. We assessed the impact of direct PRP injections into the ovaries on the fertility outcomes of women classified as poor responders. Methods: A quasi-experimental study was conducted from April 2021 to December 2022, focusing on patients classified as POSEIDON grade 3 or 4. PRP injections were administered into both ovaries. After 3 months, data were collected on anti-Mullerian hormone (AMH) level, follicle-stimulating hormone (FSH) level, and the numbers of oocytes, mature oocytes, and good-quality embryos following ovarian stimulation. We then compared the data from before and after PRP injection. Results: This study included 50 women, with a mean of 39 years (interquartile range [IQR], 35 to 43) and 4 years (IQR, 2 to 6) for age and infertility duration, respectively. FSH levels decreased after treatment, while AMH levels and the numbers of oocytes, metaphase II oocytes, and high-quality embryos increased. However, only the increase in high-quality embryos was significant. The pregnancy and spontaneous pregnancy rates were 20% and 14%, respectively. Notably, women with secondary infertility exhibited a significantly higher pregnancy rate than those with primary infertility. Conclusion: Ample evidence suggests that PRP can enhance ovarian function. However, further studies are needed to identify the appropriate candidates for this procedure, establish the optimal PRP preparation method, and standardize the procedure for its adjuvant use in assisted reproductive technology cycles.

• Journal of Korea Multimedia Society
• /
• v.22 no.11
• /
• pp.1223-1232
• /
• 2019

The injection is the input method of the image feature vector from the encoder to the decoder. Since the image feature vector contains object details such as color and texture, it is essential to generate image captions. However, the bidirectional decoder model using the existing injection method only inputs the image feature vector in the first step, so image feature vectors of the backward sequence are vanishing. This problem makes it difficult to describe the context in detail. Therefore, in this paper, we propose the parallel injection method to improve the description performance of image captions. The proposed Injection method fuses all embeddings and image vectors to preserve the context. Also, We optimize our image caption model with Bidirectional Gated Recurrent Unit (Bi-GRU) to reduce the amount of computation of the decoder. To validate the proposed model, experiments were conducted with a certified image caption dataset, demonstrating excellence in comparison with the latest models using BLEU and METEOR scores. The proposed model improved the BLEU score up to 20.2 points and the METEOR score up to 3.65 points compared to the existing caption model.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.414-419
• /
• 2016

A study of a precision test according to the control method of an injection molding machine was carried out. The effects of the screw stroke, holding pressure, melt temperature on both the hydraulic and electric injection molding machine were examined. In addition, hypothesis testing was performed to determine the deviation of the data obtained in the experiments. The conclusions obtained in this study were as follows. Significant deviations in the screw stroke, melt temperature and holding pressure occurred in that order. The hydraulic type showed significantly more variation between the products compared to the electric type. In addition, using a mini tab from the statistics program, a hypothesis was proposed and the P value of the injection stroke, holding pressure, melting temperature injection stroke and melting temperature had adopted a null hypothesis ($H_0$). The holding pressure, which showed mutual differences, adopted an alternative hypothesis ($H_1$).

• Journal of the Korean Society of Industry Convergence
• /
• v.17 no.4
• /
• pp.234-244
• /
• 2014

Recently it has been focused that the automobile engine has developed in a strong upward tendency for the use of the high viscosity and poorer quality fuels in achieving the high performance, fuel economy, and emission reduction. Therefore it is not easy to solve the problems between low specific fuel consumption and exhaust emission control at motor cars. In this study, it is designed and used the engine test bed which is installed with turbocharger and intercooler. In addition to equipped using CRDI by controlling injection timing with mapping modulator, it has been tested and analyzed the engine performance, combustion characteristics, and exhaust emission as operating parameters, and they were engine speeds(rpm), injection timing(bTDC), and engine load(%). From the result of an experimental analysis, peak cylinder pressure and the rate of pressure rise were increased, and the location of it was closer toward top dead center according to the increasing of engine speed and load, and with advancing injection timing. The combustion characteristics are effected by fuel injection timing due to be enhanced the mass burned fraction. Using the engine dynamometer for analyzing the engine performance, the engine torque and power have been enhanced according to advancing the fuel injection timing. In analyzing of exhaust emission, there has been a trade-off between PM and NOx with increasing of engine speed and load, and with advanced injection timing. The experimental data are shown that the formation of NOx has increased and PM, vice versa.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• v.11 no.2
• /
• pp.376-381
• /
• 2006

• Journal of Pharmacopuncture
• /
• v.20 no.3
• /
• pp.227-229
• /
• 2017

Fibrosis of skeletal muscle following acupuncture is an iatrogenic disorder. The present case illustrates a patient with a unilateral fibrotic formation on a thumb muscle after acupuncture injection therapy with red sage. The patient in the present case was a counter-terrorism police officer with right-handedness; he noted a palpable nodule three months after injection therapy at his left first dorsal interosseous in which the acupuncture point LI4 (He Gu) is located. He also found a reduction in the strength of his left pinch grip that noticeably affected his left handgun marksmanship. However, being ambidextrous in single-hand pistol shooting is an essential requirement for counter-terrorism police officers. Based on the patient's medical history and claims, no underlying disease or trauma was found to be associated with his current complaint. During physical examination, a fibrotic formation in his left first dorsal interosseous muscle was visualized by using diagnostic ultrasound; also, as confirmed with dynamometry, the strength of his left pinch grip was significantly lower than that of the right counterpart. Because acupuncture injection therapy has three components, antiseptic practices, the mechanical action of syringe insertion, and the pharmacological effect of the sterile herb extract, any one of the components may have contributed to the present adverse event. The first dorsal interosseous muscle is small in dimension and rather vascular; thus, it is not an ideal site for intramuscular injection. When a clinician needs to treat a patient by performing acupuncture at the LI4 acupoint and injecting a herbal extract simultaneously, the clinician should only mechanically stimulate the LI4 acupoint while injecting the herbal medicine into the LI14 (Bi Noe) acupoint on the same meridian, the LI14 acupoint being located in the distal portion of the deltoid muscle and being fairly close to the universally agreed upon site on the upper arm for safe administration of an injection.

• Archives of Plastic Surgery
• /
• v.48 no.1
• /
• pp.10-14
• /
• 2021

Soft tissue filler injections are widely used due to their immediate effects, predictable results, and high stability. However, as the use of soft tissue filler injections has increased, various complications have been reported. We report a life-threatening complication in a patient who developed sepsis and necrotizing fasciitis. A 45-year-old woman presented with right leg pain and discharge from the labia majora. The patient had received a soft tissue filler injection of unknown composition 1 year earlier and had recently undergone incision and drainage for an inflammatory cystic nodule. Antibiotic treatment was administered for cellulitis, but the infection progressed to necrotizing fasciitis and sepsis. Fasciotomy and intensive care unit treatment improved the systemic infection, but the soft tissue filler injection site did not respond to treatment for 1 month. Thus, the injection site was covered with a pedicled vertical rectus abdominis musculocutaneous flap after wide excision. The area of skin necrosis on the leg was covered with split-thickness skin grafts. Infections occurring after soft tissue filler injections are related to biofilms, and treatment is sometimes difficult. Therefore, although soft tissue filler injections have a favorable safety profile, it is important to be aware of the risk of life-threatening complications.

• Analytical Science and Technology
• /
• v.35 no.5
• /
• pp.218-227
• /
• 2022

A simple and fast throughput flow injection (FI) system with a merging-zone technique was designed to determine ferrous and ferric in an aqueous solution. The method is based on the direct reaction of ferrous with a Bathophenanthroline reagent (Bphen) in acidic media. The forming red complex absorbs light at 533 nm. All conditions of the flow injection system were investigated. The analytical curve of ferrous was linear in the range of 0.07 to 4 mg/L with an r² value of 0.9968. The detection and quantification limits were 0.02 and 0.04 mg/L, respectively. The molar absorptivity and Sandell's sensitivity were 4.0577 × 10⁶ L/mol cm and 25 × 10^-5 ㎍/cm², respectively. The homemade valve was low-cost with high repeatability (n = 7) at an RSD of 1.26 % and zero dead volume. The values of the dispersion coefficient were 2.318, 2.022, and 1.636 for the concentrations of 0.2, 1, and 3 mg/L, respectively. The analysis throughput of the designed flow injection unit was 57 sample per hour.

• Journal of Biosystems Engineering
• /
• v.33 no.4
• /
• pp.276-281
• /
• 2008

A flow injection analysis method (FIA), which analyzes sample conditions after injecting a sample and reagents into a continuous stream, are recognized as the most adequate analyzing method according to the increase of sampling frequency, the decrease of measuring time and the diversity of measuring targets. Specially, the FIA is considered to be used effectively for the control of a fermentation process to produce fermentation food and useful microbial production by activation of a fermentation industry for development of biological materials. In this study, a flow injection analysis sensor unit was developed for on-line monitoring of the fermentation process. The performance was verified by on-line measuring the concentration of glucose of the fermentation process of wine. The glucose concentrations of the samples were measured every 12 hours during the whole fermentation process and compared with those by a HPLC. The concentration relative errors of glucose on the fermentation process of wine showed below 30% within 72 hours and over 50% after the 72 hours. The sensor unit had potential to on-line monitoring of the fermentation process but some problems to overcome for an commercial application.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.10
• /
• pp.1190-1197
• /
• 1999

The management of power factor(PF) in the distribution line is treated according to the measurement a month about the feeder unit at the substation. In Korea, we have not researched into power factor in distribution system due to it's less weight. The reactive power in advanced countries is controlled automatically by the compensative condenser switch on/off under the monitoring. This paper first presents the optimal condenser position and proper capacity by lagrangue factor ${\lambda}_{Q}$ which is the line loss index about reactive power unit. Therefore, the largest ${\lambda}_{Q}$ node is the condenser injection point and we find out the best condenser capacity when the line loss is saturated by the moderation of condenser volume. By this method, we suggest 0.6% uprising PF by injection of 15 kVA condenser. Additionally, PF is analysed into 5 areas; large city, middle city, small city, farm village, fishing village by the use of Power Platform which is classified the same concept of the low load management in KEPCO. Two feeders of each area are selected by the worst results of PF in specified areas.