• Elastomers and Composites
• /
• 제38권4호
• /
• pp.295-302
• /
• 2003

사출성형에서 성형품의 수축현상은 사출온도, 사출압력, 금형온도와 같은 성형공정에 따라 다르게 나타나며 게이트의 크기 등과 같은 금형설계에 따라서도 다르게 나타난다. 또한 수지의 결정화 유무에 따라 다르게 나타나고 있다. 본 연구에서는 여러가지 공정변수와 수지 특성에 따른 성형 수축률을 결정성수지인 poly(butylene terephthalate) (PBT)와 비결정성 수지인 polycarbonate (PC), poly(methyl methacrylate) (PMMA)를 사용하여 연구하였다. 결정성 수지가 비결정성 수지에 비해 약 3배 정도의 큰 수축률을 보였다. 사출 성형품의 성형 수축은 사출온도와 금형온도가 높을수록 그리고 사출압력이 작을수록 수축률은 커지는 경향을 보였다. 게이트의 크기가 커질수록 캐비티내의 압력전달이 원활하여 성형수축률은 작아 졌다. 또한 수지의 흐름방향과 흐름직각방향의 수축률 실험에서는 흐름방향의 수축이 더 작은 경향을 보였다. 게이트와의 거리에 따른 성형수축률은 게이트에서 가까운쪽의 수축이 먼쪽보다 더 큰 수축을 보였는데 이 현상은 잔류응력의 차이로 인하여 나타난 현상으로 해석된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1239-1242
• /
• 2003

The target of this paper is the manufacturing system of mould plant and the object of system development is the reduction of lead times and the improvement of product quality. From the existing MES framework. we found the module to apply in the mould plant, designed and developed the function of the module. Also. as the environment of development is based on internet, we can check and analysis correctly the status of mould plant from remote site.

• Journal of Computational Design and Engineering
• /
• 제3권3호
• /
• pp.266-273
• /
• 2016

Optimization of hole-making operations in manufacturing industry plays a vital role. Tool travel and tool switch planning are the two major issues in hole-making operations. Many industrial applications such as moulds, dies, engine block, automotive parts etc. requires machining of large number of holes. Large number of machining operations like drilling, enlargement or tapping/reaming are required to achieve the final size of individual hole, which gives rise to number of possible sequences to complete hole-making operations on the part depending upon the location of hole and tool sequence to be followed. It is necessary to find the optimal sequence of operations which minimizes the total processing cost of hole-making operations. In this work, therefore an attempt is made to reduce the total processing cost of hole-making operations by applying relatively new optimization algorithms known as shuffled frog leaping algorithm and proposed modified shuffled frog leaping algorithm for the determination of optimal sequence of hole-making operations. An industrial application example of ejector plate of injection mould is considered in this work to demonstrate the proposed approach. The obtained results by the shuffled frog leaping algorithm and proposed modified shuffled frog leaping algorithm are compared with each other. It is seen from the obtained results that the results of proposed modified shuffled frog leaping algorithm are superior to those obtained using shuffled frog leaping algorithm.

• Design & Manufacturing
• /
• 제9권2호
• /
• pp.10-15
• /
• 2015

The water has been the suitable for the cooling medium until now. But the water as cooling medium seem to have the limit for high speed injection. The steam plastic molding injection use the steam as the medium when raise the mold temperature. The weld line has been the major quality problems in a plastic injection parts to be difficult to be solved. These problems in injection-molded plastic parts are difficult to find the reason because these issues are usually in tradeoff realtions with each other. The purpose of this paper is to obtain the optimum injection moulding condition for improving the quality of plastic injection parts and to inquire the productivity improvement with the measured cycle time by steam plastic moluding injection. Based on these numerical results, the guidelines of mould design and injection processing condition were established. As a result, the improvement of quality and the reduction of cycle time was achieved.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.505-506
• /
• 2006

This study is focused on the manufacturing technique of powder injection molding of watch case made from zirconia powder. A series of computer simulation processes were applied to the prediction of the flow pattern in the inside of the mould and defects as weld-line. The material properties of melted feedstock, including the PVT graph and thermal viscosity flowage properties were measured to obtain the input data to be used in a computer simulation. Also, a molding experiment was conducted and the results of the experiment showed a good agreement with the simulation results for flow pattern and weld line location. On the other hand, gravity and inertia effects have an influence on the velocity of the melt front because of the high density of ceramic powder particles during powder injection molding in comparison with polymer's injection molding process. In the experiment, the position of the melt front was compared with the upper gate and lower gate positions. The gravity and inertia effect could be confirmed in the experimental results.

• 한국기계가공학회지
• /
• 제11권2호
• /
• pp.98-104
• /
• 2012

In this paper, precision processing is carried out for the pre hardened steel(HRC 54), which is one of injection mould materials. Processing characteristics are estimated according to the number of tool cutting blade and roundness is observed by the 3-Dimensional measuring machine. The surface roughness affected by the wire electric discharge machining are measured. Cutting component force of STAVOX is the highest in condition of 2F processing because load per a blade of cutting tool is high. Especially, the difference in Fz is over 20N by cutting load. The slower spindle rotation speed and tool feed rate are, the better cutting component force is. The roundness of hole processed in condition of 4F is good because feed rate is able to be fast. When rotation speed is increased, the surface roughness is decreased. The surface roughness acquired in condition of 2F processing is higher about 50% than 4F processing.

• 소성∙가공
• /
• 제14권4호
• /
• pp.360-367
• /
• 2005

The injection-molded plastic parts have many surface defects: warpage, weldline, flowmark, zetting, scratching, shading and so on. As weldline was one of the major surface defects in the case of desktop monitor, warpage and surface shrinkage are the bigger problems of LCD monitor in the pursuit of light weight and thinner thickness of parts. Some measures to improve these defects were introduced in this paper. Based on these, the laboratory work to find out the optimum processing conditions and to get the best parts was repeated injection moulding try-out after reflecting these improvements. The defects of warpage and surface shrinkage was significantly improved after the improvements in the case of the 20.1 inch even if in the 15 and 17inch case the warpage size was a lttle over the allowed specification because of not taking the measure for parts design within the allowable limits from the required specification in the cause of cost down.

• 대한기계학회논문집A
• /
• 제35권12호
• /
• pp.1619-1625
• /
• 2011

본 논문의 목적은 3 차원 사출성형 해석을 통하여 컴퓨터 마우스 제작용 이중사출성형 금형의 공정조건을 결정하는 것이다. 적합한 사출성형 공정조건을 선정하기 위하여 사출 시간, 최대 사출압력 및 보압 시간이 사출성형 특성과 제품 품질에 미치는 영향을 정량적으로 고찰하였다. 사출성형 해석 결과로부터 제품의 수축과 휨 변형을 최소화 할 수 있는 최적 사출성형 공정조건을 예측하였다. 최종적으로 사출성형 실험을 수행하여 이종재료로 구성된 컴퓨터 마우스 제품을 제작하였다. 이 결과로부터 선정한 사출성형 공정조건을 적용할 경우 적절한 이종 재료로 구성된 컴퓨터 마우스가 제작될 수 있음을 알 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.275-278
• /
• 2005

This study has focused on manufacturing technique of powder injection molding of watch case which made from zirconia powder. A series of computer simulation process was applied to prediction of the flow pattern in the inside of the mould and defects as weld line. The material properties of melted feedstock inclusive of the PVT graph and thermal viscosity flowage properties were measured for obtaining the input data in computer simulation. Also, molding experiment was conducted and the results of experiment showed that good agreement with simulation results far flow pattern and weld line location. On the other hand, gravity and inertia effect have an influence on velocity of melt front because of high density of ceramic powder particles in powder injection molding against the polymer injection molding process. In the experiment, the position of melt front was compared with upper gate and lower gate position. The gravity and inertia effect could be confirmed in the experimental results.

• 한국세라믹학회지
• /
• 제46권3호
• /
• pp.229-233
• /
• 2009

This study has focused on manufacturing technique of powder injection molding of watch case made from zirconia powder. A series of computer simulation process was applied to prediction of the flow pattern in the inside of the mould to clarifying the change of sintering shrinkage depended on flow direction. The material properties of melted feedstock inclusive of the PVT graph and thermal viscosity flowage properties were measured for obtaining the input data in computer simulation. Also, molding experiment was conducted and the results of experiment showed that good agreement with simulation results for flow pattern and weld line location. On the other hand, gravity and inertia effect have an influence on velocity of melt front because of high density of ceramic powder particles in powder injection molding against the polymer injection molding process. In the experiment, the position of melt front was compared with upper gate and lower gate position. The gravity and inertia effect could be confirmed in the experimental results.