• 한국자동차공학회논문집
• /
• 제20권3호
• /
• pp.141-147
• /
• 2012

A direct injection diesel engine with large amount of exhaust gas recirculation was used to investigate low temperature diesel combustion. Pilot injection strategy was adopted in low temperature diesel combustion to reduce high carbon monoxide and hydrocarbon emissions. Combustion characteristics and exhaust emissions of low temperature diesel combustion under different pilot injection timings, pilot injection quantities and injection pressures were analyzed. Retarding pilot injection timing, increasing pilot injection quantity and higher injection pressure advanced main combustion timing and increased peak heat release rate of main combustion. As a result of these strategies, carbon monoxide and hydrocarbon emissions were reduced. Soot emission was slightly increased with retarded pilot injection timing while the effect of pilot injection on nitrogen oxides emission was negligible under low combustion temperature condition. Spatial distribution of fuel from the spray targeting visualization was also investigated to provide more insight into the reason for the reduction in carbon monoxide and hydrocarbon emissions.

• 한국재난정보학회 논문집
• /
• 제18권2호
• /
• pp.261-268
• /
• 2022

연구목적: 지표투과레이더 탐사에 의해 발견된 공동의 경우, 정확히 예측된 공동의 체적에 상응하도록 주입재를 충분히 채우고 강도를 발휘하게 함으로써 안정성을 확보하여 지반함몰을 예방하여야 한다. 연구방법: 지표투과레이더 탐사에 의한 공동파형 분석 방법과 공동형상 촬영장비를 이용한 방법을 바탕으로, 공동의 규모와 형상이 불규칙한 실제 공동을 실측하여 긴급복구시 주입재의 공동채움량을 산정하였다. 연구결과: 지표투과레이더 탐사에 의한 방법과 공동형상화 장비를 활용한 공동 규모 산정을 통하여 공동규모 및 토피에 따른 주입재 채움량과의 상관관계를 분석하여 예상 채움량을 제시하였다. 결론: 공동형상화 장비에 의해 실측된 공동체적은 지표투과레이더 탐사에 의한 공동 체적의 20% ~ 40% 범위로 나타났다. 또한, GPR탐사에 의해 예측된 공동규모 대비 주입재 채움량은 약 60% ~ 140% 범위였으며, 공동 형상화 장비에 의한 공동규모 대비 주입재 채움량은 약 260% ~ 320%로 확인되었다.

• 한국정밀공학회지
• /
• 제19권7호
• /
• pp.80-87
• /
• 2002

Liquefied petroleum gas (LPG) is used in spark ignition (SI) engines. Fuel injection rate of an injector is affected by fuel temperature and pressure in LPG liquid injection systems for either a multi-point-injection (MPI) or a direct injection (DI) engine. Even fuel injection conditions are varied, the air-fuel ratio should be accurately controlled to reduce exhaust emissions. In this study, a correction factor fur the fuel injection rate of an injector is derived from density ratio and pressure difference ratio. A compensation method of injected fuel amount is proposed for a fuel injection control system. The experimental results for the LPG liquid injection system in a SI engine show that this system works well fur a full range of engine speed and load condition, and the air-fuel ratio is accurately controlled by the proposed correction factor.

• 대한족부족관절학회지
• /
• 제17권2호
• /
• pp.93-99
• /
• 2013

Purpose: Proximal metatarsal chevron osteotomy for hallux valgus is followed by significant amount of postoperative pain. Periarticular multimodal drug local injection can be an option for pain control. This study was attempted to evaluate the efficacy of the morphine as multimodal drug and to confirm the effect of periarticular multimodal drug local injection on controlling early postoperative pain. Materials and Methods: Between March 2012 and June 2012, 22 patients received proximal metatarsal chevron osteotomy for the correction of hallux valgus deformity. 10 patients (Group A) received periarticular injection of the test solution made with morphine, ropivacaine, ephinephrine and ketorolac. 12 patients (Group B) received periarticular injection of the test solution without morphine. The visual analog scale (VAS) was checked at 2, 4, 6, 8 hours, 1 day and 2 days each after surgery. Results: The VAS score at postoperative 2 hours to 1 day between two groups showed no significant difference, but the VAS score at postoperative 2 days was significantly higher in Group A compared to the VAS score of group B. The amount of additional pain control (tramadol HCL) between two groups showed no significant difference for 3 days after surgery. Conclusion: Periarticular multimodal drug local injection was effective in reducing pain after hallux valgus surgery regardless of mixing with morphine.

• 대한한방내과학회지
• /
• 제34권4호
• /
• pp.466-477
• /
• 2013

Objectives : To report and demonstrate the effect of decreasing ascites volume by SB intraperitoneal injection to a refractory ascites patient with synchronous colorectal liver metastasis and metachronous peritoneal carcinomatosis. Methods : Two cycles of intraperitoneal and intravenous SB injection were conducted. Each injection cycle was made up of 4 days. Nine vials of SB were injected to the patient every day. To compare the volume of ascites between pret- and post-treatment, follow-up computed tomography was done on June 3, 2013. To observe other therapeutic effects of SB injection, laboratory tests were conducted periodically. Results : On the follow-up computed tomography images, the amount of ascites and pleural effusion had decreased compared to the April 30, 2013 computed tomography images. The levels of aspartate transaminase, alanine aminotransferase and lactate dehydrogenase decreased significantly from May 9, to May 30, 2013. The amount of oral intake increased constantly during hospitalization. The patient's symptoms such as abdominal distension, abdominal pain and dyspnea were improving until discharge. Conclusions : Even if thiese results cannot be applied to every synchronous colorectal cancer liver metastasis patient, we demonstrated that SB intraperitoneal injection has ascites-decreasing effect to refractory ascites patients with synchronous colorectal liver metastasis and metachronous peritoneal carcinomatosis.

• 혜화의학회지
• /
• 제14권2호
• /
• pp.137-142
• /
• 2005

Objective : This study was designed to report the clinical effect of Rectal Injection therapy on chronic prostatitis. Methods : We analyzed 20 manuscripts contributed to the Chinese medical journals from 1999 to 2003 that presenting report of Rectal Injection therapy on chronic prostatitis. Results : The results are summarized as follows 1. Operation of rectal injection therapy was treated 2~3 times and one course take time 5~30 days. 2. During therapy, average amount of fluid is 100~150 ml and it takes 1~2 hours. 3. Using medication was 'chung-yol' medicine, 'hwal-hyul-gu-er' medicine, 'bo-yik' medicine, 'lee-soo-sam-sup' medicine. Conclusion : We conclusion that Rectal Injection therapy was clinical effect on chronic prostatitis.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.259-264
• /
• 2005

The shrinkage of the product in injection molded part occurs due to the volume change with variation of temperature and pressure and is influenced by the processing conditions of injection molding. Mold designers greatly concerns the shrinkage of parts for a high dimensional accuracy. In this study, bar type HIPS specimen with 15x19 grid on the surface was tested. The amount of shrinkage of flow and transverse directions was examined with respect to the injection molding conditions such as melt temperature, injection speed, holding pressure, mold temperature and cooling time. As the packing pressure increased, the difference of shrinkage of both directions is decreased and the absolute shrinkage value also decreased.

• 한국양식학회지
• /
• 제10권4호
• /
• pp.409-415
• /
• 1997

The carp $\beta$-actin regulatory sequences and RSV/LTR promoter were tested whether they are functinal to express linked structure gene (chloramphenicol acetyltransferas, CAT) in olive flounder (Paralichthys olivaceus) by determining the patterns of gene expression following intramuscular in vivo direct injection. The injection experiments with various concentrations of both pRSVCAT and pFV4CAT clearly revealed the effectiveness of DNA dosage on expression of CAT. The increase of CAT activity was linear in both plasmids, and maximal CAT activity was obtained with 100 ug of pFV4CAT injection. The amounts of CAT expression with pFV4CAT-injected fist were higher than those with pRSVCAT-injected fish. CAT activity was readily detectable as early as one day after injection, slightly increased at day 2, and declined over time. Most amount of DNA intramuscularly injected into olive flounder muscles persisted extrachromosomally without showing any integrated or replicated form in vivo.

• 대한후두음성언어의학회지
• /
• 제15권2호
• /
• pp.87-91
• /
• 2004

Background and Objectives : Temporary vocal fold injection is not only performed to restore the laryngeal function in temporary unilateral vocal fold paralysis or paresis, but also performed as a test injection prior to the permanent injection. Gelfoam has been safely used for the past several decades for the temporary vocal fold augmentation. Recently, we found a new material, called Radieses Lite, may be used as a temporary injection material. Material and Methods : We report preliminary results of 11 patients who had Radiesse Lite injection with a variety of pathologies. Results : Based on the results from the 6 patients who completed follow-up, the duration of effectiveness of Radiesse Lite seems to be from 2 to 3 months depending on the injection amount. Radiesse Lite satisfies several requirements of the ideal temporary vocal fold injection material in terms of injectability, convenience, duration of effectiveness and safety. Conclusion : The authors concluded that Radiesse Lite might be a good option for temporary vocal fold injection especially in the office setting.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.796-801
• /
• 2001

During cold operation period, fuel injection system directly contributes the unburned hydrocarbon formation in spark ignition engines. The relationship between injection parameters and HC emission behavior was investigated through a series of experiments. Spray behavior of port fuel injectors was characterized through a quantitative evaluation of mass concentration of liquid fuel by a patternator and PDA. 6-hole injector was found to produce finer spray than single hole one. Using a purpose-built test rig, the wall wetting fuel was measured, which was mostly affected by wall temperature. Varying coolant temperature($20{\sim}80^{\circ}C$), HC emissions were measured in a production engine. With respect to the different types of injectors, HC emission was also measured. In the 6-hole injector application, the engine produced less HC emission in low coolant temperature region. Though it produces much more amount of wetting fuel, it has the advantages of finer atomization quality. In high coolant temperature region, there was little effect between different types of injectors. The control schemes to reduce HC emissions during cold start could be suggested from the findings that the amount of fuel supply and HC emission could be reduced by utilizing fine spray and high intake wall temperature.