• Korean Chemical Engineering Research
• /
• v.45 no.3
• /
• pp.304-309
• /
• 2007

In this study, the "Multi Well Plate-type cell Apparatus" was designed and setup for performing the producing experiments of methane hydrate by depressurization, heat stimulating methods. In order to characterizing the producing mechanism of hydrate through porous materials, the experiments for various producing methods have been conducted with the aid of the apparatus which has high permeability. In the experimental result of depressurization method, the pressure is temporarily increased unlikely conventional gas reservoir due to the sourcing effect of hydrate dissociation in the pore. Meanwhile, the temperature is decreased because of the endothermic reaction while hydrate is dissociated. In the experimental results of heat stimulating method, the dissociation in depressurization method is more slowly processed than that in thermal method, and hence, its gas production is lower. In the case of production right after heating, hydrate is dissociated only near injecting point and the permeability becomes greater at that area only. It infers that the more gas is produced during relatively earlier producing period. Since then, the hydrate is more slowly dissociated than the case of production after heating and soaking. This time, the performances of pressure and production obtained by thermal method have been analyzed in order to investigate the effect of soaking time on gas recovery. As a result, the gas recoveries in the case of 2 min and 4 min soaking are higher than case in 6 min soaking. This is reason that hydrate is reformed due to the decrease of temperature. It is expected that the experimental results obtained in this work may be more clearly explained by utilizing the lower permeable porous system with the greater hydrate saturation.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.26 no.3
• /
• pp.209-222
• /
• 2024

The Earth Pressure Balance (EPB) shield Tunnel Boring Machine (TBM) is widely used for underground tunnel construction for its advantages, such as eliminating the need for additional facilities compared to the slurry shield TBM, which requires Slurry Treatment Plant (STP). During EPB shield TBM excavation, a soil conditioning technique is employed to enhance the physical properties of the excavated soil by injecting additives, thus broadening the range of applicable ground conditions to EPB shield TBMs. This study explored the use of xanthan gum, a type of biopolymer, as an alternative to the commonly used polymer additive. Biopolymers, derived from biological sources, are fully biodegradable. In contrast to traditional polymers such as polyacrylic acid, which contain environmentally harmful components, xanthan gum is gaining attention as an eco-friendly material due to its minimal toxicity and environmental impact. Test conditions with similar workability were established through slump tests, and the rheological characteristics were assessed using a laboratory pressurized vane shear test apparatus. The experiments demonstrated that, despite exhibiting similar workability, the peak strength in the flow curve decreased with increasing the content of xanthan gum. Consequently, a correlation between the xanthan gum content and peak strength was established. Replacing the traditional polymers with xanthan gum could enable stable EPB shield TBM operation by reducing equipment load, in addition to offering environmental benefits.

• Tuberculosis and Respiratory Diseases
• /
• v.42 no.6
• /
• pp.913-922
• /
• 1995

Background: When we define the pressure of pulmonary vasculature in which a recruitment of blood flow occurs as $P_I$ and the proportion of change in pulmonary artery to that in cardiac output as IR and then we compare PI and IR with pulmonary vascular resistance, we would find some problems in pulmonary vascular resistance. In other words, it is the theory that, IR should be increased mainly in pulmonary embolism in which decreases the cross sectional area of pulmonary vasculature. But there are many contradictory reports resulted from various researches and the fact is known widely that any difference exists between PVR and PI, IR. For this reason, the purpose of this study is to observe how PI and IR change at the time of the outbreak and during treatment of the pulmonary embolism, and to find out the meaning of these new indicators and the difference from the pulmonary vascular resistance used generally when we subdivide the pulmonary vascular resistance into PI and IR. Method: After making AV fistula in experimental dog, we controlled cardiac output at the intervals of 15 minute in case of three kinds(all AV fistula are obstructed, only one of fistula is open and all of fistula is open), and after evoking massive pulmonary embolism with radioactive autologous blood clots, we measured the mean pulmonary artery pressure, and calculated PI and IR. We observed the pattern of change in PI and IR, without giving the control group any specific treatment and with injecting intravenously rtPA in the Group 1 and Group 2 at the dose of 1mg per kg, for 15 minutes fot the former and 3 hours for the latter. Result: 1) Pulmonary vascular resistance showed a change similar to that of pulmonary artery pressure and in all three group, PVR increased significantly, but group 1 and group 2 showed tendency that PVR keeps on decreasing after treatment, and the rate of decrease in group 1 is more rapid than group 2 significantly. 2) Both intersection(PI) and degree(IR) are proved statistically significant, in view of the straight line relationship between cardiac output and pulmonary artery pressure, calculated by minimal regression method. 3) PI changed similarly to pulmonary vascular resistance, while in the IR which is theoretically more similar to PVR, there was no significant difference or change after rtPA infusion. Conclusion: In the pulmonary embolism, Both change in IR which means real resistance of pulmonary vasculature and PI which was developed due to secondary vasoconstriction by pulmonary embolism are reflected same time.

• Economic and Environmental Geology
• /
• v.53 no.1
• /
• pp.23-32
• /
• 2020

Geological CO₂ sequestration is a global warming response technology to limit atmospheric emissions by injecting CO₂ captured on a large scale into deep geological formations. The presented results concern mineralogical and hydrogeological investigations (FE-SEM, XRD, XRF, and MICP) of mudstone samples from drilling cores of the Pohang basin, which is the research area for the first demonstration-scale CO₂ storage project in Korea. They aim to identify the mineral properties of the mudstone constituting the caprock and to quantitatively evaluate the hydrogeologic sealing capacity that directly affects the stability and reliability of geological CO₂ storage. Mineralogical analysis showed that the mudstone samples are mainly composed of quartz, K-feldspar, plagioclase and a small amount of pyrite, calcite, clay minerals, etc. Mercury intrusion capillary pressure analysis also showed that the samples generally had uniform particle configurations and pore distribution and there was no distinct correlation between the estimated porosity and air permeability. The allowable CO₂ column heights based on the estimated pore-entry pressures and breakthrough pressures were found to be significantly higher than the thickness of the targeting CO₂ injection layer. These results showed that the mudstone layers in the Yeongil group, Pohang basin, Korea have sufficient sealing capacity to suppress the leakage of CO₂ injected during the demonstration-scale CO₂ storage project. It should be noticed, however, that the applicability of results and analyses in this study is limited by the lack of available samples. For rigorous assessment of the sealing efficiency for geological CO₂ storage operations, significant efforts on collection and multi-aspect evaluation for core samples over entire caprock formations should be accompanied.

• Korean Chemical Engineering Research
• /
• v.45 no.6
• /
• pp.638-647
• /
• 2007

In this study, we present the evaluation chart for assessing the applicability of $CO_2$ flooding method to oil reservoirs. The evaluation chart consists of four categories as source availability, miscibility, applicability and injecting method of miscible flooding. The applicability of reservoir and oil in the chart has basic items of the properties such as oil gravity, viscosity, oil saturation, reservoir temperature and permeability, and these are quantitatively graded. Meanwhile, for additional items of $CO_2$ purity, reservoir thickness and formation dip, they are graded as "highmediumlow". In the case of evaluating the injection method of either continuous injection or WAG ($CO_2$), the qualitative decision will be made according to formation dip, vertical permeability, reservoir thickness, etc. The recommended score in the chart was assigned by utilizing 51 oil producing fields which $CO_2$ flooding is successfully being applied. The evaluation chart developed in this work has been applied to the Captain oil producing field located in Scotland as well as to the Onado oil field of Venezuela, which Korean oil companies have participated in. For the Captain field, the reservoir quality in terms of permeability and porosity is considered to be very excellent to flow the oil. The oil in captain field contains heavier component of $C_{21+}$ as 54%. Therefore, this heavy oil could be immiscibly displaced, hence the evaluating result with the basis of immiscible criteria shows that $CO_2$ immiscible flooding in this field could be properly applied. In the case of Onado oil producing field, since the estimated minimum miscibility pressure is lower than the reservoir pressure, it was assessed that the Onado field would be efficiently conducted for $CO_2$ miscible flooding.

• The Korean Journal of Mycology
• /
• v.36 no.1
• /
• pp.75-83
• /
• 2008

Lentinus giganteus, one of edible and medicinal mushroom belongs to Pleurotaceae of Agaricales, has been known to contain some inhibitive substances on Sarcoma 180 and curative effect on high blood pressure. Neutral saline soluble (0.9% NaCl), hot water soluble and methanol soluble substances (hereinafter referred to Fr. NaCl, Fr. HW and Fr. MeOH, respectively) were extracted from fruiting body of the mushroom. In vitro cytotoxicity tests, crude polysaccharides were not cytotoxic against cancer cell lines such as Sarcoma 180 and HepG2 at the concentration of $10{\sim}2,000\;{\mu}g/ml$, but crude polysaccharides from Fr. NaCl was toxic to NIH3T3 at the concentration of $10{\sim}2,000\;{\mu}g/ml$. Intraperitoneal injection with crude polysaccharides showed life prolongation effect of $14.3{\sim}67.5%$ in mice previously inoculated with Sarcoma 180, respectively. Fr. NaCl exhibited the immuno-potentiating activity of B lymphocyte by increasing the alkaline phosphatase activity by $1.53{\sim}1.68$ folds compared with control at the concentration of $50{\sim}200\;{\mu}g/ml$, respectively. The numbers of peritoneal exudate cells and circulating leukocytes were increased by 7.7 and 1.6 folds by injecting Fr. NaCl and Fr. MeOH into the mice at the concentration of 50 mg/ml body weight, respectively.

• Herbal Formula Science
• /
• v.13 no.1
• /
• pp.49-69
• /
• 2005

This Study was designed to investigate the effect of Sunkihwalhyul -Tang extract(SHT) on the change of cerebral hemodynamics [regional cerebral blood flow(rCBF), pial arterial diameter(PAD) and mean arterial blood pressure(MABP)] in normal and cerebral ischemic rats, and further to determine the mechanisms of action of SHT on hemodynamics. In addition, this study was designed to investigate whether SHT inhibits lactate dehydrog enase(LDH) activity in neuronal cells and cytokines production in serum of cerebral ischemic rats. The results were as follows 1. SHT significantly increased rCBF and PAD in a dose-dependent manner, but MABP was not changed by injecting SHT. These results suggest that SHT significantly increases rCBF by dilating PAD. 2. The SHT-induced increase in rCBF was significantly inhibited by pretreatment with indomethacin(IDN, 1 mg/kg, i.p.), an inhibitor of cyclooxygenase and methylene blue(MTB, $10{\mu}g/kg$, i.p.), an inhibitor of guanylate cyclase. 3. The SHT-induced dilation in PAD was significantly inhibited by pretreatment with IDN and MTB. 4. The SHT-induced some increase in MABP was significantly increased by pretreatment with IDN. These results suggest that the mechanism of action of SBT is mediated by guanylate cyclase. 5. Both rCBF and PAD were significantly and stably increased by SHT(10 mg/kg, i.p.) during the period of cerebral reperfusion, which contrasted with the findings of rapid and marked increase in control group. 6. SBH significantly inhibited LDH activity in neuronal cells. These results suggest that SHT prevents the neuronal death. 7. In cytokine production in the senlm drawn from femoral artery 1 hr after middlecerebral arterial occlusion, sample group showed significantly decreased production of IL-1$\beta$ production, decreased production TNF-$\alpha$ and increased Production of IL-10 compared with control group. 8. In cytokine production in the serum drawn femoral artery 1 hr after reperfusion, sample group showed significantly decreased production of IL-1$\beta$ and TNF-$\alpha$ as wellas significantly increased production of IL10 compared with control group. These results suggest that SHT mediated by guanylate cyclase has inhibitive effect on the brain damage by inhibiting LDH activity, IL-1$\beta$ and TNF-$\alpha$ production, and by accelerating IL-10 production. The present author thinks that SHT has an anti-ischemic effects through the improvement of cerebral hemodynamics and inhibitive enects on the brain damage.

• Journal of the Korean Ceramic Society
• /
• v.40 no.12
• /
• pp.1202-1207
• /
• 2003

Using a recently developed Hybric Plasma-Particle Accelerating Impact Deposition (HP-PAID) process, synthesis of nanostructured silicon coatings has been investigated by injecting vapor-phase TEOS (tetraethosysilane, (C$_2$H$\_$5/O)$_4$Si) into an Ar hybrid plasma. The plasma jet with reactants was expanded through nozzle into a deposition chamber, with the pressure dropping from 700 to 10 torr. Ultrafine particles accelerated in the free jet downstream of the nozzle, deposited by an inertial impaction onto a temperature controlled substrate. By using this process, nanostructured amorphous silicon coatings with grain size smaller than 10 nm could be synthesized. These samples were annealed in an Ar and crystallized at 900$^{\circ}C$ for 30 min. TEM analysis showed that the annealed coatings were also composed of nanoparticles smaller than 10 nm, which showed a good consistency that the average grain size of 7 nm was also estimated from a peak shift of 2.39 cm$\^$-1/ and Full Width at Half Maximum (FWHM) 5.92 cm$\^$-1/ of Raman analysis. The noteworthy is that a strong PL peak at 398 nm was also obtained for this sample, which indicates that the deposited coatings also contained 3∼4 nm nanostructured grains.

• The Journal of Korean Medicine
• /
• v.26 no.3 s.63
• /
• pp.188-203
• /
• 2005

Objectives : This study was designed to investigate the effects of Jayun-tang extract (JYT) on the change of cerebral hemodynamics [regional cerebral blood flow (rCBF), pial arterial diameter (PAD) and mean arterial blood pressure (MABP)] in normal and cerebral ischemic rats, na to determine the mechanisms of action of JYT. Methods : We investigated whether JYT inhibits lactate dehydrogenase activity in neuronal cells and cytokines production in serum of cerebral ischemic rats. Results : 1. JYT significantly increased rCBF and PAD in a dose-dependent manner, but MABP was not changed by injecting JYT. These results suggested JYT significantly increased rCBF by dilating PAD. 2. The JYT-induced increase in rCBF was significantly inhibited from pretreatment with indomethacin (1mg/kg, i.p.), an inhibitor of cyclooxygenase and methylene blue $(10{\mu}g/kg, i.p.)$, an inhibitor of guanylate cyclase. 3. The JYT-induced dilation in PAD was significantly inhibited from pretreatment with indomethacin, but was increased by pretreatment with methylene blue. 4 The JYT-induced increase in MABP was reduced by pretreatment with indomethacin and methylene blue. 5. JYT significantly inhibited lactate dehydrogenase activity in neuronal cells. These results suggest that JYT prevented the neuronal death. 6. Both rCBF and PAD were significantly and stably increased by JYT $(10{\mu}g/kg,\;i.p.)$ during the Period or cerebral reperfusion, which contrasted with the findings of rapid and marked increase in the control group. 7. In cytokine production in the serum drawn from femoral artery 1hr after middle cerebral artery occlusion, the sample group showed significantly decreased production of $IL-1\beta$ and $TNF-\alpha$ as well as increased production of IL-10 and $TGF-\beta$ compared with rho control group. 8. In cytokine production in the serum drawn from femoral artery 1hr after reperfusion, the sample group showed significantly decreased production of $IL-1\beta$ and $TNF-\alpha$ as well as significantly increased production of IL-10 and $TGF-\beta$ compared with the control group. Conclusions : JYT mediated by cyclooxygenase had an inhibitive effect on brain damage by inhibiting lactate dehydrogenase activity, $IL-1\beta$ and $TNF-\alpha$ production, and by accelerating IL-10 and $TGF-\beta$ production. The author feels that JYT had anti-ischemic effects through the improvement of cerebral hemodynamics and inhibitive effects on brain damage.

• Clean Technology
• /
• v.20 no.1
• /
• pp.1-6
• /
• 2014

$CO_2$ is generated by the combustion reaction, when getting the energy from fossil fuel. If the carbon dioxide emissions increases more, the global warming problem will become more serious. CCS (carbon capture storage) needs to be developed for the prevention of this. When liquefied $CO_2$ is transported, BOG (boil-off gas) is generated because of several problems. In the study, by injecting liquefied $CO_2$ in two tanks which contains $40m^3$each, the amount of BOG and its composition were measured during 30 days when generating pressure changes and external heat, loading, unloading. In result, 16,040 kg of BOG was generated and the composition has been found out to be 99.95% $CO_2$ and 0.05 % $N_2$. Also, we conducted simulation process for reliquefaction of generated BOG with vapor compression cycle using the PRO/II with PROVISION version 9.2. As a result, the refrigeration cycle of the total circulation flow rate was 42.07 kg/h and the condenser utility consumption was 48.85 kg/h.